main
Ray
Publish 0.1.0
3329540
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342
{
"slug": "tmc2210atj-t",
"version": "0.1.0",
"type": "component",
"description": "TRINAMIC Motion Control GmbH Motor Driver ICs, TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management",
"tmc2210atj+t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tmc2210atj-t.kicad_sym",
"tmc2210atj-t.kicad_mod",
"tmc2210atj-t.glb",
"tmc2210atj-t.step",
"tmc2210atj-t.lbr",
"docs/hero.png",
"docs/tmc2210atj-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tmc2210atj-t-hero.glb",
"tmc2210atj-t-hero.overlay.json",
"tmc2210atj-t-etched.glb"
],
"component": {
"mpn": "TMC2210ATJ+T",
"manufacturer": "TRINAMIC Motion Control GmbH",
"package": "TQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Power Management",
"subcategory": "Motor Driver ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a794341d2fe2243f2874d410e5494c92.pdf",
"parts": {
"symbol": "tmc2210atj-t.kicad_sym",
"footprint": "tmc2210atj-t.kicad_mod",
"model_3d": "tmc2210atj-t-hero.glb",
"model_3d_plain": "tmc2210atj-t-etched.glb",
"model_3d_step": "tmc2210atj-t-etched.step",
"model_3d_step_plain": "tmc2210atj-t.step",
"lbr": "tmc2210atj-t.lbr"
},
"distributor_links": {
"lcsc": "C22356062",
"digikey": "175-TMC2210ATJ+TTR-ND",
"mouser": "700-TMC2210ATJ+T"
},
"distributor_check": {
"checked_at": "2026-10-27T06:12:43Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "175-TMC2210ATJ+TTR-ND",
"status": "found"
},
"mouser": {
"pn": "700-TMC2210ATJ+T",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "IREF",
"type": "input",
"description": "Analog reference current input for current scaling; an external resistor to GND sets the full-scale current."
},
{
"number": "2",
"name": "N.C.",
"type": "unconnected",
"description": "Not connected; keep open or connect to GND for additional cooling."
},
{
"number": "3",
"name": "VDD1V8",
"type": "power_out",
"description": "Output of the internal 1.8V regulator; attach a 2.2µF or larger ceramic capacitor to AGND near the pin."
},
{
"number": "4",
"name": "AGND",
"type": "power_in",
"description": "Analog ground; connect to the ground plane."
},
{
"number": "5",
"name": "VCC_IO",
"type": "power_in",
"description": "Digital IO supply voltage from an external source that defines the circuit IO level and is required for proper output voltage levels."
},
{
"number": "6",
"name": "CFG6",
"type": "input",
"description": "Configuration input for hold current reduction (with CFG7); has an internal pull-up and is referenced to VCC_IO."
},
{
"number": "7",
"name": "CFG4",
"type": "input",
"description": "Configuration input for digital current scale (GND = 75% of IRUN, VCC_IO = 100%); has an internal pull-up."
},
{
"number": "8",
"name": "CFG5",
"type": "input",
"description": "Configuration input selecting chopper mode (GND = SpreadCycle, VCC_IO = StealthChop2); has an internal pull-up."
},
{
"number": "9",
"name": "DRV_ENN",
"type": "input",
"description": "Enable input; the power stage switches off with all motor outputs floating when driven high, and it has an internal pull-up."
},
{
"number": "10",
"name": "CFG7",
"type": "input",
"description": "Configuration input for hold current reduction (with CFG6); has an internal pull-down."
},
{
"number": "11",
"name": "ERROR",
"type": "output",
"description": "Open-drain error output that requires an external pull-up resistor and is pulled low during the reset state."
},
{
"number": "12",
"name": "INDEX",
"type": "output",
"description": "Open-drain index pulse output that marks microstep 0 position of coil B."
},
{
"number": "13",
"name": "OV",
"type": "output",
"description": "Open-drain overvoltage indicator output with a fixed threshold; an external pull-up resistor is required."
},
{
"number": "14",
"name": "CPI",
"type": "passive",
"description": "Charge pump capacitor input; tie to CPO using a 22nF 50V capacitor."
},
{
"number": "15",
"name": "CPO",
"type": "passive",
"description": "Charge pump capacitor output that connects to CPI through a 22nF 50V capacitor."
},
{
"number": "16",
"name": "VCP",
"type": "power_out",
"description": "Charge pump voltage; tie to VS using a 1.0µF capacitor with the positive end close to the VS pin."
},
{
"number": "17",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage (4.5V to 36V); provide filtering capacitance near the pin with the shortest loop to GND."
},
{
"number": "18",
"name": "OUT1B",
"type": "output",
"description": "Motor coil B output 1 of the H-bridge."
},
{
"number": "19",
"name": "OUT2B",
"type": "output",
"description": "Motor coil B output 2 of the H-bridge."
},
{
"number": "20",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage (4.5V to 36V); provide filtering capacitance near the pin with the shortest loop to GND."
},
{
"number": "21",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage (4.5V to 36V); provide filtering capacitance near the pin with the shortest loop to GND."
},
{
"number": "22",
"name": "OUT2A",
"type": "output",
"description": "Motor coil A output 2 of the H-bridge."
},
{
"number": "23",
"name": "OUT1A",
"type": "output",
"description": "Motor coil A output 1 of the H-bridge."
},
{
"number": "24",
"name": "VS",
"type": "power_in",
"description": "Motor supply voltage (4.5V to 36V); provide filtering capacitance near the pin with the shortest loop to GND."
},
{
"number": "25",
"name": "SLEEPN",
"type": "input",
"description": "Active-low power-down and reset input; a continuous low level puts the device into sleep mode, and the pin is a high-voltage pin with an internal pull-down."
},
{
"number": "26",
"name": "CFG3",
"type": "input",
"description": "Configuration input for run current range (with CFG2); has an internal pull-up."
},
{
"number": "27",
"name": "CFG2",
"type": "input",
"description": "Configuration input for run current range (with CFG3); has an internal pull-up."
},
{
"number": "28",
"name": "CFG1",
"type": "input",
"description": "Configuration input for microstep resolution (with CFG0); has an internal pull-up."
},
{
"number": "29",
"name": "CFG0",
"type": "input",
"description": "Configuration input for microstep resolution (with CFG1)."
},
{
"number": "30",
"name": "N.C.",
"type": "unconnected",
"description": "Not connected; keep open or connect to GND for additional cooling."
},
{
"number": "31",
"name": "STEP",
"type": "input",
"description": "STEP input referenced to VCC_IO; each active edge advances the motor by one step."
},
{
"number": "32",
"name": "DIR",
"type": "input",
"description": "Direction input referenced to VCC_IO that sets the motor rotation direction."
},
{
"number": "33",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": null,
"consensus": "skipped (clean text read)",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 20,
"cost_usd": 0.0019,
"at": "2026-10-27T06:12:33"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/a794341d2fe2243f2874d410e5494c92.pdf",
"pages": 29,
"sha256": "fada830a99c27888",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tmc2210atj-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tmc2210atj-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5ed45d7e35caa148575cda9b7e960d7debc69954158e402d82060827cbf9b3d7",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}