main
Ray tm7705: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 66af49f
{
  "schema_version": 1,
  "type": "component",
  "slug": "tm7705",
  "title": "TM7705",
  "brief": "TM Shenzhen Titan Micro Elec Analog To Digital Converters (ADC), SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "tm7705",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TM7705",
    "manufacturer": "TM Shenzhen Titan Micro Elec",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882524201734144",
    "parts": {
      "symbol": "tm7705.kicad_sym",
      "footprint": "tm7705.kicad_mod",
      "model_3d": "tm7705-etched.glb",
      "model_3d_plain": "tm7705.glb",
      "model_3d_step": "tm7705-etched.step",
      "model_3d_step_plain": "tm7705.step",
      "lbr": "tm7705.lbr"
    },
    "distributor_links": {
      "lcsc": "C77545"
    },
    "pins": [
      {
        "number": "1",
        "name": "SCLK",
        "type": "input",
        "description": "Schmitt logic input for serial clock; applies external serial clock to access TM7705 serial data in continuous or non-continuous mode."
      },
      {
        "number": "2",
        "name": "MCLK IN",
        "type": "input",
        "description": "Master clock input for converter; accepts crystal, resonator, or external CMOS-compatible clock signal with frequency range 500kHz to 5MHz."
      },
      {
        "number": "3",
        "name": "MCLK OUT",
        "type": "output",
        "description": "Master clock output connected with MCLK IN for crystal/resonator oscillator operation; provides inverted clock if external clock applied; disableable via CLK DIS bit."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select input; selects TM7705 for three-wire serial interface operation; can serve as frame synchronization in multi-device systems."
      },
      {
        "number": "5",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input; resets control logic, interface logic, calibration coefficients, digital filter, and analog modulator to power-up state."
      },
      {
        "number": "6",
        "name": "AIN2(+)",
        "type": "input",
        "description": "Positive input of fully-differential analog input channel 2; accepts differential signals relative to AIN2(-) from GND-30mV to VDD+30mV."
      },
      {
        "number": "7",
        "name": "AIN1(+)",
        "type": "input",
        "description": "Positive input of fully-differential analog input channel 1; accepts differential signals relative to AIN1(-) from GND-30mV to VDD+30mV."
      },
      {
        "number": "8",
        "name": "AIN1(-)",
        "type": "input",
        "description": "Negative input of fully-differential analog input channel 1; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V."
      },
      {
        "number": "9",
        "name": "REF IN(+)",
        "type": "input",
        "description": "Positive differential reference input; must exceed REF IN(-); difference voltage 1V minimum to 3V maximum depending on VDD and specified performance."
      },
      {
        "number": "10",
        "name": "REF IN(-)",
        "type": "input",
        "description": "Negative differential reference input; accepts voltages between GND and VDD provided REF IN(+) exceeds this voltage."
      },
      {
        "number": "11",
        "name": "AIN2(-)",
        "type": "input",
        "description": "Negative input of fully-differential analog input channel 2; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V."
      },
      {
        "number": "12",
        "name": "DRDY",
        "type": "output",
        "description": "Logic output; pulses low when new output word available in data register; returns high during register update (minimum 500×tCLKIN); indicates calibration completion."
      },
      {
        "number": "13",
        "name": "DOUT",
        "type": "output",
        "description": "Serial data output from internal shift register; delivers conversion results and register contents selected by communication register bits RS2-RS0."
      },
      {
        "number": "14",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input to internal shift register; accepts configuration data routed to registers selected by communication register bits RS2-RS0."
      },
      {
        "number": "15",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply voltage input; operating range +2.7V to +3.3V or +4.75V to +5.25V for specified performance; maximum ratings -0.3V to +7V."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; internal circuit ground potential reference point; provides system ground return path."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 42,
        "cost_usd": 0.4119,
        "at": "2026-09-22T09:05:07"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882524201734144",
        "pages": 42,
        "sha256": "89909833ebc41aa8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tm7705.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tm7705-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4f70689e974afb878d2c67e89dc16cd64d1e4600b59db4b5a62d7fea65f94999",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "TM Shenzhen Titan Micro Elec",
      "Package": "SOIC-16",
      "Category": "Data Acquisition",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tm7705"
  ],
  "discovery_pitch": "TM7705 (TM Shenzhen Titan Micro Elec) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tm7705.kicad_sym",
    "tm7705.kicad_mod",
    "tm7705.glb",
    "tm7705.step",
    "tm7705.lbr",
    "docs/hero.png",
    "docs/tm7705-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T10:58:17.596Z"
}