main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tm7705: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tm7705: viewers · Ray
package.json tm7705: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tm7705: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tm7705 · Ray
tm7705-etched.fit.json tm7705: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tm7705-etched.glb tm7705: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tm7705-etched.step tm7705: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tm7705.glb Publish 0.1.0 · Ray
tm7705.kicad_mod Publish 0.1.0 · Ray
tm7705.kicad_sym Publish 0.1.0 · Ray
tm7705.lbr Publish 0.1.0 · Ray
tm7705.step Publish 0.1.0 · Ray

TM7705

TM Shenzhen Titan Micro Elec · Analog To Digital Converters (ADC) · SOIC-16

TM7705 from TM Shenzhen Titan Micro Elec, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Schmitt logic input for serial clock; applies external serial clock to access TM7705 serial data in continuous or non-continuous mode.
2 MCLK IN input Master clock input for converter; accepts crystal, resonator, or external CMOS-compatible clock signal with frequency range 500kHz to 5MHz.
3 MCLK OUT output Master clock output connected with MCLK IN for crystal/resonator oscillator operation; provides inverted clock if external clock applied; disableable via CLK DIS bit.
4 CS input Active-low chip select input; selects TM7705 for three-wire serial interface operation; can serve as frame synchronization in multi-device systems.
5 RESET input Active-low reset input; resets control logic, interface logic, calibration coefficients, digital filter, and analog modulator to power-up state.
6 AIN2(+) input Positive input of fully-differential analog input channel 2; accepts differential signals relative to AIN2(-) from GND-30mV to VDD+30mV.
7 AIN1(+) input Positive input of fully-differential analog input channel 1; accepts differential signals relative to AIN1(-) from GND-30mV to VDD+30mV.
8 AIN1(-) input Negative input of fully-differential analog input channel 1; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V.
9 REF IN(+) input Positive differential reference input; must exceed REF IN(-); difference voltage 1V minimum to 3V maximum depending on VDD and specified performance.
10 REF IN(-) input Negative differential reference input; accepts voltages between GND and VDD provided REF IN(+) exceeds this voltage.
11 AIN2(-) input Negative input of fully-differential analog input channel 2; serves as reference point for differential input measurements; absolute voltage -0.3V to VDD+0.3V.
12 DRDY output Logic output; pulses low when new output word available in data register; returns high during register update (minimum 500×tCLKIN); indicates calibration completion.
13 DOUT output Serial data output from internal shift register; delivers conversion results and register contents selected by communication register bits RS2-RS0.
14 DIN input Serial data input to internal shift register; accepts configuration data routed to registers selected by communication register bits RS2-RS0.
15 VDD power_in Power supply voltage input; operating range +2.7V to +3.3V or +4.75V to +5.25V for specified performance; maximum ratings -0.3V to +7V.
16 GND power_in Ground reference; internal circuit ground potential reference point; provides system ground return path.

Key specifications

Parameter Value
Manufacturer TM Shenzhen Titan Micro Elec
Package SOIC-16
Category Data Acquisition
Pins 16

CAD (KiCad official)

  • Symbol: TM7705
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: tm7705-etched.step / tm7705-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm7705.step / tm7705.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM Shenzhen Titan Micro Elec datasheet (42 pp, sha256 89909833ebc41aa8, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF