main
History Download
Ray Publish 0.1.0 2b07d80

TM512AL1

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-16

TM512AL1 from TM(Shenzhen Titan Micro Elec), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply negative terminal (ground) of the SOP16 package.
2 OUTR output PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel.
3 OUTG/OUTB/OUTW output PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel.
4 OUTG/OUTB/OUTW output PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel.
5 OUTG/OUTB/OUTW output PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel.
6 REXT input Constant-current feedback pin; a resistor to ground sets the output current and the pin must not be left floating.
7 ADRO output Address write-code line output used to program the chip address through the write-code bus.
8 DO output Decoded data forwarding output that can drive Titan 18 and 19 series LED ICs, with an output low/high drive of at least 10 mA.
9 TST input Test pin with an internal pull-down; it is used for testing.
10 ADRI input Address write-code line input with an internal pull-up; high-level input is 0.7Vdd minimum.
11 AI input Positive differential DMX512 signal input, with a differential input threshold of -0.2 V to 0.2 V.
12 BI input Negative differential DMX512 signal input, with a differential input threshold of -0.2 V to 0.2 V.
13 PWM input Output polarity select: left floating for normal polarity, connected to VDD for reversed polarity with the refresh rate lowered to 800 Hz.
14 PORT1 input Field-select input with an internal pull-down, used together with PORT0 to choose the 1/2/3/4 field mode.
15 PORT0 input Field-select input with an internal pull-down, used together with PORT1 to choose the 1/2/3/4 field mode.
16 VDD power_in Positive power supply input; the logic supply range is 5.5 V to 6.5 V as stated in the absolute maximum ratings, with a recommended maximum of 5.5 V.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-16
Category Nixie Tube Driver/LED Driver
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage Vdd 5.5 6.5 V 25C, VDD=5V unless noted 4
Output port withstand voltage Vout 30 V 25C, VDD=5V unless noted 4
Logic input voltage Vi -0.5 V max printed as Vdd+0.5 4
Operating temperature Topt -40 85 ℃ 25C, VDD=5V unless noted 4
Storage temperature Tstg -55 150 ℃ 25C, VDD=5V unless noted 4
ESD rating 3000 V 25C, VDD=5V unless noted 4
Package power dissipation Pd 800 mW 25C, VDD=5V unless noted 4
Logic supply voltage (recommended) Vdd 5.5 V -40C to +85C, VDD=5V unless noted 4
Low-level input voltage Vil 0 V -40C to +85C, VDD=5V unless noted; max printed as 0.3Vdd 4
Low-level output current Iol 10 mA VDD=5V, Vo=0.4V, DO, ADRO 4
High-level output current Ioh 10 mA VDD=5V, Vo=4V, DO, ADRO 4
Differential input common mode voltage Vcm 12 V 4
Differential input threshold voltage Vth -0.2 0.2 V 0V<Vcm<12V 4
Output pin sink current Isink 3 60 mA OUTR, OUTG, OUTB, OUTW; REXT to GND resistor 550Ω 4
Channel-to-channel current deviation dIout -3 1.5 3 % Vds=1V, Iout=17mA 4
Chip-to-chip current deviation dIout -5 3 5 % Vds=1V, Iout=17mA 4
Output voltage sensitivity to Vds %dVds -0.5 0.1 0.5 %/V 1V<Vds<3V 4
Output voltage sensitivity to Vdd %dVds -2 1 2 %/V 4.5V<Vdd<5.5V 4
Dynamic supply current IDDdyn 4 mA VDD=5V, no load 4
Power consumption PD 650 mW Ta=25C 4
Differential input current Iab 28 µA VDD=5V 4
Differential input hysteresis voltage 70 mV Vcm=0V 4
Differential input impedance Rin 270 KΩ 4

CAD (KiCad official)

  • Symbol: TM512AL1
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: tm512al1-etched.step / tm512al1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm512al1.step / tm512al1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (12 pp, sha256 af1a9e67d21a9c10, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF