Generated by kicad-footprint-generator · KiCad file format 20260206
TM512AL1
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-16
TM512AL1 from TM(Shenzhen Titan Micro Elec), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply negative terminal (ground) of the SOP16 package. |
| 2 | OUTR | output | PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel. |
| 3 | OUTG/OUTB/OUTW | output | PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel. |
| 4 | OUTG/OUTB/OUTW | output | PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel. |
| 5 | OUTG/OUTB/OUTW | output | PWM constant-current output port; the constant current is set by the resistor on REXT, up to 60 mA per channel. |
| 6 | REXT | input | Constant-current feedback pin; a resistor to ground sets the output current and the pin must not be left floating. |
| 7 | ADRO | output | Address write-code line output used to program the chip address through the write-code bus. |
| 8 | DO | output | Decoded data forwarding output that can drive Titan 18 and 19 series LED ICs, with an output low/high drive of at least 10 mA. |
| 9 | TST | input | Test pin with an internal pull-down; it is used for testing. |
| 10 | ADRI | input | Address write-code line input with an internal pull-up; high-level input is 0.7Vdd minimum. |
| 11 | AI | input | Positive differential DMX512 signal input, with a differential input threshold of -0.2 V to 0.2 V. |
| 12 | BI | input | Negative differential DMX512 signal input, with a differential input threshold of -0.2 V to 0.2 V. |
| 13 | PWM | input | Output polarity select: left floating for normal polarity, connected to VDD for reversed polarity with the refresh rate lowered to 800 Hz. |
| 14 | PORT1 | input | Field-select input with an internal pull-down, used together with PORT0 to choose the 1/2/3/4 field mode. |
| 15 | PORT0 | input | Field-select input with an internal pull-down, used together with PORT1 to choose the 1/2/3/4 field mode. |
| 16 | VDD | power_in | Positive power supply input; the logic supply range is 5.5 V to 6.5 V as stated in the absolute maximum ratings, with a recommended maximum of 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | Vdd | 5.5 | 6.5 | V | 25C, VDD=5V unless noted | 4 | |
| Output port withstand voltage | Vout | 30 | V | 25C, VDD=5V unless noted | 4 | ||
| Logic input voltage | Vi | -0.5 | V | max printed as Vdd+0.5 | 4 | ||
| Operating temperature | Topt | -40 | 85 | ℃ | 25C, VDD=5V unless noted | 4 | |
| Storage temperature | Tstg | -55 | 150 | ℃ | 25C, VDD=5V unless noted | 4 | |
| ESD rating | 3000 | V | 25C, VDD=5V unless noted | 4 | |||
| Package power dissipation | Pd | 800 | mW | 25C, VDD=5V unless noted | 4 | ||
| Logic supply voltage (recommended) | Vdd | 5.5 | V | -40C to +85C, VDD=5V unless noted | 4 | ||
| Low-level input voltage | Vil | 0 | V | -40C to +85C, VDD=5V unless noted; max printed as 0.3Vdd | 4 | ||
| Low-level output current | Iol | 10 | mA | VDD=5V, Vo=0.4V, DO, ADRO | 4 | ||
| High-level output current | Ioh | 10 | mA | VDD=5V, Vo=4V, DO, ADRO | 4 | ||
| Differential input common mode voltage | Vcm | 12 | V | 4 | |||
| Differential input threshold voltage | Vth | -0.2 | 0.2 | V | 0V<Vcm<12V | 4 | |
| Output pin sink current | Isink | 3 | 60 | mA | OUTR, OUTG, OUTB, OUTW; REXT to GND resistor 550Ω | 4 | |
| Channel-to-channel current deviation | dIout | -3 | 1.5 | 3 | % | Vds=1V, Iout=17mA | 4 |
| Chip-to-chip current deviation | dIout | -5 | 3 | 5 | % | Vds=1V, Iout=17mA | 4 |
| Output voltage sensitivity to Vds | %dVds | -0.5 | 0.1 | 0.5 | %/V | 1V<Vds<3V | 4 |
| Output voltage sensitivity to Vdd | %dVds | -2 | 1 | 2 | %/V | 4.5V<Vdd<5.5V | 4 |
| Dynamic supply current | IDDdyn | 4 | mA | VDD=5V, no load | 4 | ||
| Power consumption | PD | 650 | mW | Ta=25C | 4 | ||
| Differential input current | Iab | 28 | µA | VDD=5V | 4 | ||
| Differential input hysteresis voltage | 70 | mV | Vcm=0V | 4 | |||
| Differential input impedance | Rin | 270 | KΩ | 4 |
CAD (KiCad official)
- Symbol:
TM512AL1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
tm512al1-etched.step/tm512al1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm512al1.step/tm512al1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (12 pp, sha256
af1a9e67d21a9c10, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).