main
Ray
Publish 0.1.0
a59c547
TM512AE0
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-8
TM512AE0 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply negative terminal (system ground); the datasheet requires all voltages to be referenced to system ground and GND to be common with the controller and other ICs on the bus. |
| 2 | ADRO | output | Address write-code line output, used to pass the address-programming signal to the next device in the chain. |
| 3 | DO | output | Decoded forwarding channel output that drives the company's 800 Kbps return-to-zero series ICs (such as the TM1804, TM1925D and TM1926D cited in the application circuit). |
| 4 | TST | input | Test pin with an internal pull-down; the datasheet does not give a limit for it beyond being a test input. |
| 5 | ADRI | input | Address write-code line input with an internal pull-up; high-level input is 0.7·VDD minimum and low-level input is 0.3·VDD maximum. |
| 6 | AI | input | Positive differential signal input of the DMX512 bus (the A line); it has a 250 kΩ differential input impedance and an internal pull-up, and the datasheet recommends not adding external pull resistors. |
| 7 | BI | input | Negative differential signal input of the DMX512 bus (the B line); it has an internal pull-down, a differential common-mode voltage rating of 12 V, and a differential threshold of ±0.2 V. |
| 8 | VDD | power_in | Positive power supply; the datasheet gives a logic supply range of 2.5 V to 6.5 V, with 5 V as the test condition for most parameters. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-level output current (ADRO) | Iol | 10 | mA | Vo=0.4V, ADRO | 4 | ||
| High-level output current (ADRO) | Ioh | 10 | mA | Vo=4.6V, ADRO | 4 | ||
| Input current | Ii | -1 | 1 | µA | 4 | ||
| Differential input common-mode voltage | Vcm | 12 | V | 4 | |||
| Differential input threshold voltage | Vth | -0.2 | 0.2 | V | 0V<Vcm<12V | 4 | |
| Power dissipation | PD | 400 | mW | Ta=25℃ | 4 | ||
| Thermal resistance, junction-to-ambient | Rth(j-a) | 80 | 190 | ℃/W | Ta=25℃ | 4 | |
| Logic supply voltage (recommended) | Vdd | 2.5 | 5.5 | 6.5 | V | 3 | |
| Low-level input voltage (recommended); printed max is 0.3Vdd | Vil | 0 | V | 3 | |||
| Logic supply voltage (absolute maximum) | Vdd | 2.5 | 6.5 | V | 3 | ||
| Logic input voltage (absolute maximum); printed max is Vdd+0.5 | Vi | -0.5 | V | 3 | |||
| Operating temperature | Topt | -45 | 85 | ℃ | 3 | ||
| Storage temperature | Tstg | -55 | 150 | ℃ | 3 | ||
| ESD rating | ESD | 8000 | V | 3 | |||
| Rated output power | Pd | 400 | mW | 3 | |||
| Bit rate (adaptive decode) | 200 | 500 | 1000 | Kbps | 4 | ||
| Bit time | 5 | 2 | 1 | μs | 4 | ||
| Start bit | S | 5 | 2 | 1 | μs | 4 | |
| 8-bit data | D0~D7 | 5 | 2 | 1 | μs | 4 | |
| 2 stop bits | T | 10 | 4 | 2 | μs | 4 | |
| Pre-reset mark | 1 | 0 | 1e+06 | μs | 4 | ||
| Reset signal | 2 | 88 | 1e+06 | μs | 4 | ||
| Post-reset mark | 3 | 8 | 1e+06 | μs | 5 | ||
| Field (note1) | 4 | 55 | 22 | 11 | μs | 5 | |
| Inter-field space | 5 | 0 | 1e+06 | μs | 5 | ||
| Data packet length | 6 | 1024 | 1e+06 | μs | 5 | ||
| Reset signal interval | 7 | 4096 | 1e+06 | μs | 5 | ||
| Differential input current | Iab | 28 | µA | VDD=5V | 4 | ||
| Differential input hysteresis voltage | 70 | mV | Vcm=0V | 4 | |||
| Differential input impedance | Rin | 250 | KΩ | 4 | |||
| Dynamic current consumption | IDDdyn | 4 | mA | VDD=5V, no load | 4 |
CAD (KiCad official)
- Symbol:
TM512AE0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tm512ae0-etched.step/tm512ae0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm512ae0.step/tm512ae0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (8 pp, sha256
611b4174c75f5410, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TM512AE0
**TM(Shenzhen Titan Micro Elec)** · LED Drivers · SOP-8
TM512AE0 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply negative terminal (system ground); the datasheet requires all voltages to be referenced to system ground and GND to be common with the controller and other ICs on the bus. |
| 2 | ADRO | output | Address write-code line output, used to pass the address-programming signal to the next device in the chain. |
| 3 | DO | output | Decoded forwarding channel output that drives the company's 800 Kbps return-to-zero series ICs (such as the TM1804, TM1925D and TM1926D cited in the application circuit). |
| 4 | TST | input | Test pin with an internal pull-down; the datasheet does not give a limit for it beyond being a test input. |
| 5 | ADRI | input | Address write-code line input with an internal pull-up; high-level input is 0.7·VDD minimum and low-level input is 0.3·VDD maximum. |
| 6 | AI | input | Positive differential signal input of the DMX512 bus (the A line); it has a 250 kΩ differential input impedance and an internal pull-up, and the datasheet recommends not adding external pull resistors. |
| 7 | BI | input | Negative differential signal input of the DMX512 bus (the B line); it has an internal pull-down, a differential common-mode voltage rating of 12 V, and a differential threshold of ±0.2 V. |
| 8 | VDD | power_in | Positive power supply; the datasheet gives a logic supply range of 2.5 V to 6.5 V, with 5 V as the test condition for most parameters. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-level output current (ADRO) | Iol | 10 | | | mA | Vo=0.4V, ADRO | 4 |
| High-level output current (ADRO) | Ioh | 10 | | | mA | Vo=4.6V, ADRO | 4 |
| Input current | Ii | -1 | | 1 | µA | | 4 |
| Differential input common-mode voltage | Vcm | | | 12 | V | | 4 |
| Differential input threshold voltage | Vth | -0.2 | | 0.2 | V | 0V<Vcm<12V | 4 |
| Power dissipation | PD | | | 400 | mW | Ta=25℃ | 4 |
| Thermal resistance, junction-to-ambient | Rth(j-a) | 80 | | 190 | ℃/W | Ta=25℃ | 4 |
| Logic supply voltage (recommended) | Vdd | 2.5 | 5.5 | 6.5 | V | | 3 |
| Low-level input voltage (recommended); printed max is 0.3Vdd | Vil | 0 | | | V | | 3 |
| Logic supply voltage (absolute maximum) | Vdd | 2.5 | | 6.5 | V | | 3 |
| Logic input voltage (absolute maximum); printed max is Vdd+0.5 | Vi | -0.5 | | | V | | 3 |
| Operating temperature | Topt | -45 | | 85 | ℃ | | 3 |
| Storage temperature | Tstg | -55 | | 150 | ℃ | | 3 |
| ESD rating | ESD | | | 8000 | V | | 3 |
| Rated output power | Pd | | | 400 | mW | | 3 |
| Bit rate (adaptive decode) | | 200 | 500 | 1000 | Kbps | | 4 |
| Bit time | | 5 | 2 | 1 | μs | | 4 |
| Start bit | S | 5 | 2 | 1 | μs | | 4 |
| 8-bit data | D0~D7 | 5 | 2 | 1 | μs | | 4 |
| 2 stop bits | T | 10 | 4 | 2 | μs | | 4 |
| Pre-reset mark | 1 | 0 | | 1e+06 | μs | | 4 |
| Reset signal | 2 | 88 | | 1e+06 | μs | | 4 |
| Post-reset mark | 3 | 8 | | 1e+06 | μs | | 5 |
| Field (note1) | 4 | 55 | 22 | 11 | μs | | 5 |
| Inter-field space | 5 | 0 | | 1e+06 | μs | | 5 |
| Data packet length | 6 | 1024 | | 1e+06 | μs | | 5 |
| Reset signal interval | 7 | 4096 | | 1e+06 | μs | | 5 |
| Differential input current | Iab | | 28 | | µA | VDD=5V | 4 |
| Differential input hysteresis voltage | | | 70 | | mV | Vcm=0V | 4 |
| Differential input impedance | Rin | | 250 | | KΩ | | 4 |
| Dynamic current consumption | IDDdyn | | 4 | | mA | VDD=5V, no load | 4 |
## CAD (KiCad official)
- Symbol: `TM512AE0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `tm512ae0-etched.step` / `tm512ae0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm512ae0.step` / `tm512ae0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TM(Shenzhen Titan Micro Elec) datasheet](docs/tm512ae0-datasheet.pdf) (8 pp, sha256 `611b4174c75f5410`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tm512ae0-datasheet.pdf)