Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM512AE0

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-8

TM512AE0 from TM(Shenzhen Titan Micro Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply negative terminal (system ground); the datasheet requires all voltages to be referenced to system ground and GND to be common with the controller and other ICs on the bus.
2 ADRO output Address write-code line output, used to pass the address-programming signal to the next device in the chain.
3 DO output Decoded forwarding channel output that drives the company's 800 Kbps return-to-zero series ICs (such as the TM1804, TM1925D and TM1926D cited in the application circuit).
4 TST input Test pin with an internal pull-down; the datasheet does not give a limit for it beyond being a test input.
5 ADRI input Address write-code line input with an internal pull-up; high-level input is 0.7·VDD minimum and low-level input is 0.3·VDD maximum.
6 AI input Positive differential signal input of the DMX512 bus (the A line); it has a 250 kΩ differential input impedance and an internal pull-up, and the datasheet recommends not adding external pull resistors.
7 BI input Negative differential signal input of the DMX512 bus (the B line); it has an internal pull-down, a differential common-mode voltage rating of 12 V, and a differential threshold of ±0.2 V.
8 VDD power_in Positive power supply; the datasheet gives a logic supply range of 2.5 V to 6.5 V, with 5 V as the test condition for most parameters.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Low-level output current (ADRO) Iol 10 mA Vo=0.4V, ADRO 4
High-level output current (ADRO) Ioh 10 mA Vo=4.6V, ADRO 4
Input current Ii -1 1 µA 4
Differential input common-mode voltage Vcm 12 V 4
Differential input threshold voltage Vth -0.2 0.2 V 0V<Vcm<12V 4
Power dissipation PD 400 mW Ta=25℃ 4
Thermal resistance, junction-to-ambient Rth(j-a) 80 190 ℃/W Ta=25℃ 4
Logic supply voltage (recommended) Vdd 2.5 5.5 6.5 V 3
Low-level input voltage (recommended); printed max is 0.3Vdd Vil 0 V 3
Logic supply voltage (absolute maximum) Vdd 2.5 6.5 V 3
Logic input voltage (absolute maximum); printed max is Vdd+0.5 Vi -0.5 V 3
Operating temperature Topt -45 85 ℃ 3
Storage temperature Tstg -55 150 ℃ 3
ESD rating ESD 8000 V 3
Rated output power Pd 400 mW 3
Bit rate (adaptive decode) 200 500 1000 Kbps 4
Bit time 5 2 1 μs 4
Start bit S 5 2 1 μs 4
8-bit data D0~D7 5 2 1 μs 4
2 stop bits T 10 4 2 μs 4
Pre-reset mark 1 0 1e+06 μs 4
Reset signal 2 88 1e+06 μs 4
Post-reset mark 3 8 1e+06 μs 5
Field (note1) 4 55 22 11 μs 5
Inter-field space 5 0 1e+06 μs 5
Data packet length 6 1024 1e+06 μs 5
Reset signal interval 7 4096 1e+06 μs 5
Differential input current Iab 28 µA VDD=5V 4
Differential input hysteresis voltage 70 mV Vcm=0V 4
Differential input impedance Rin 250 KΩ 4
Dynamic current consumption IDDdyn 4 mA VDD=5V, no load 4

CAD (KiCad official)

  • Symbol: TM512AE0
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: tm512ae0-etched.step / tm512ae0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm512ae0.step / tm512ae0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (8 pp, sha256 611b4174c75f5410, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF