main
History Download
Ray Publish 0.1.0 3e385d0

TM1649

TM(Shenzhen Titan Micro Elec) · LED Drivers · SSOP-48-300mil

TM1649 from TM(Shenzhen Titan Micro Elec), in a SSOP-48-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SEG13 output Segment output, P-MOS open-drain output.
2 SEG14 output Segment output, P-MOS open-drain output.
3 SEG15 output Segment output, P-MOS open-drain output.
4 VDD power_in Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected.
5 GRID8 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
6 GRID7 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
7 GND power_in System ground; all GND pins must be connected.
8 GRID6 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
9 GRID5 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
10 GRID4 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
11 GRID3 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
12 GND power_in System ground; all GND pins must be connected.
13 GRID2 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
14 GRID1 output Digit output, N-MOS open-drain output; GR drive current limit +200 mA.
15 KEY5 input Touch key input; must be tied to GND if unused.
16 KEY6 input Touch key input; must be tied to GND if unused.
17 KEY7 input Touch key input; must be tied to GND if unused.
18 KEY8 input Touch key input; must be tied to GND if unused.
19 GND power_in System ground; all GND pins must be connected.
20 VDD power_in Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected.
21 LSC input Power-saving mode select: floating selects normal mode, GND selects ultra-low power mode.
22 OMS input Output mode select: floating selects 2-wire serial output, GND selects 4-wire binary parallel output.
23 GND power_in System ground; all GND pins must be connected.
24 DIO bidirectional Serial data I/O: data is input on the clock rising edge and output on the falling edge, LSB first; N-MOS open-drain output requires an external 1K-10K pull-up (10K recommended).
25 SCLK input Serial clock input: data is read on the rising edge and output on the falling edge.
26 STB input Strobe input that initializes the serial interface on a rising or falling edge; the first byte after STB goes low is taken as the command, and SCLK is ignored while STB is high.
27 K0 input Input whose data is latched after the display cycle ends; the datasheet specifies a 10 kΩ output pull-down resistance for K0.
28 BIN0 output Binary parallel key-value output.
29 BIN1 output Binary parallel key-value output.
30 BIN2/CLK bidirectional Binary parallel output and two-wire serial clock input with internal pull-up; left floating when OMS is floating.
31 BIN3/DATA output Binary parallel output or serial data N-MOS output with internal pull-up; goes low to signal a key press.
32 KEY1 input Touch key input; must be tied to GND if unused.
33 KEY2 input Touch key input; must be tied to GND if unused.
34 KEY3 input Touch key input; must be tied to GND if unused.
35 KEY4 input Touch key input; must be tied to GND if unused.
36 VDD power_in Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected.
37 SEG1/KS1 output Segment output also used as key-scan line, P-MOS open-drain output.
38 SEG2/KS2 output Segment output also used as key-scan line, P-MOS open-drain output.
39 SEG3/KS3 output Segment output also used as key-scan line, P-MOS open-drain output.
40 SEG4/KS4 output Segment output also used as key-scan line, P-MOS open-drain output.
41 SEG5/KS5 output Segment output also used as key-scan line, P-MOS open-drain output.
42 SEG6/KS6 output Segment output also used as key-scan line, P-MOS open-drain output.
43 SEG7/KS7 output Segment output also used as key-scan line, P-MOS open-drain output.
44 SEG8/KS8 output Segment output also used as key-scan line, P-MOS open-drain output.
45 SEG9 output Segment output, P-MOS open-drain output.
46 SEG10 output Segment output, P-MOS open-drain output.
47 SEG11 output Segment output, P-MOS open-drain output.
48 SEG12 output Segment output, P-MOS open-drain output.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SSOP-48-300mil
Category Nixie Tube Driver/LED Driver
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3.3 5 5.5 V Ta=+25C unless noted 16
Operating temperature Ta -40 85 C 16
Operating junction temperature Tj -50 125 C 16
Supply voltage (absolute maximum) VDD -0.3 6.5 V relative to system ground 16
Logic supply voltage (absolute maximum) VDD -0.5 7 V relative to system ground 16
Total power dissipation Pd 400 mW 16
LED SG drive output current Io1 -50 mA as printed in absolute maximum table 16
LED GR drive output current Io2 200 mA as printed in absolute maximum table 16
Operating temperature (absolute maximum) Topt -40 85 C 16
Storage temperature Tstg -65 150 C 16
High-level output current SG Ioh1 -20 -25 -40 mA Sg1-Sg15, Vo=VDD-2V, VDD=4.5V-5.5V 16
High-level output current SG Ioh2 -20 -30 -50 mA Sg1-Sg15, Vo=VDD-3V, VDD=4.5V-5.5V 16
Low-level input current GR Iol1 80 140 mA Gr1-Gr8, Vo=0.3V, VDD=4.5V-5.5V 16
Low-level output current DIO Idio 4 mA VO=0.4V, dio 16
High-level output current tolerance Itolsg 5 % VO=VDD-3V, Sg1-Sg15 16
Input current Ii -1 1 uA VI=VDD/VSS 16
Dynamic supply current IDDdyn 5 mA no load, display off 16
High-level input voltage Clock/Scl/Sda Vih 3.5 5 V VDD=5V 17
Low-level input voltage Clock/Scl/Sda Vil 0 1.5 V VDD=5V 17
Kout/Data sink current (NMOS) Iol 4 8 mA VDD=3.3V, Vol=0.1VDD 17
Kout/Data sink current (NMOS) Iol 10 20 mA VDD=5V, Vol=0.1VDD 17
Bin0-Bin3 source current (CMOS) Ioh -2 -4 mA VDD=3V, Voh=0.9VDD 17
Bin0-Bin3 source current (CMOS) Ioh -5 -10 mA VDD=5V, Voh=0.9VDD 17
Clock/Kout pull-up resistance Rph 20 60 100 KΩ VDD=3.3V 17
Clock/Kout pull-up resistance Rph 10 30 50 KΩ VDD=5V 17
Operating current Idd 1.2 1.8 mA VDD=3.3V 17
Operating current Idd 2.2 3.3 mA VDD=5V 17
Propagation delay Sclk to Dio Tpzl 300 ns Sclk to Dio 17
Propagation delay Tpzl 100 ns Cl=15pF, Rl=10K Ohm 17
Rise time Sg1-Sg15 Ttzh1 2 us Cl=300pF 17
Rise time Gr1-Gr4, Gr8-Gr5 Ttzh2 1 us Cl=300pF 17
Fall time Ttzh 1 us Cl=300pF, Sgn, Grn 17
Maximum clock frequency Fmax 1 MHz duty cycle 50% 17
Input capacitance Ci 15 pF 17
Key response time normal mode Tkrt 100 125 150 ms normal mode 17
Key response time standby mode Tkrt 100 150 250 ms standby mode 17
Maximum key hold time Tkh 60 64 68 s 17
Normal mode to standby mode time Tns 7 8 9 s 17
Clock low time Tlow 20 us 17
Clock high time Thigh 20 us 17
Data transfer rate Tbr 25 Kbps 17
Data read error retry interval Ted 6 ms 17
Clock pulse width Pwclk 400 ns 18
Strobe pulse width Pwstb 1 us 18
Data setup time Tsetup 100 ns 18
Data hold time Thold 100 ns 18
Sclk to Stb time Tclk 1 us Sclk rising to Stb rising 18
Wait time Twait 1 us Sclk rising to Sclk falling 18
Oscillator frequency tolerance (built-in RC, 450KHz) 5 % printed as 450KHz+5% 1
Low-level input voltage Vil 0.35 V Vh hysteresis, Sclk, Dio, Stb 16
Output pull-down resistance Rl 10 KΩ K0 16
Oscillator frequency Fosc 500 KHz R=16.5 KΩ 17

CAD (KiCad official)

  • Symbol: TM1649
  • Footprint: Package_SO:SSOP-48_7.5x15.9mm_P0.635mm
  • 3D model: SSOP-48-300mil (KiCad packages3D, STEP)
  • 3D model files: tm1649-etched.step / tm1649-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1649.step / tm1649.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC (19 pp, sha256 ef0f42754176e8e6, retrieved 2026-11-21)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF