Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TM1649
TM(Shenzhen Titan Micro Elec) · LED Drivers · SSOP-48-300mil
TM1649 from TM(Shenzhen Titan Micro Elec), in a SSOP-48-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SEG13 | output | Segment output, P-MOS open-drain output. |
| 2 | SEG14 | output | Segment output, P-MOS open-drain output. |
| 3 | SEG15 | output | Segment output, P-MOS open-drain output. |
| 4 | VDD | power_in | Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected. |
| 5 | GRID8 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 6 | GRID7 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 7 | GND | power_in | System ground; all GND pins must be connected. |
| 8 | GRID6 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 9 | GRID5 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 10 | GRID4 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 11 | GRID3 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 12 | GND | power_in | System ground; all GND pins must be connected. |
| 13 | GRID2 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 14 | GRID1 | output | Digit output, N-MOS open-drain output; GR drive current limit +200 mA. |
| 15 | KEY5 | input | Touch key input; must be tied to GND if unused. |
| 16 | KEY6 | input | Touch key input; must be tied to GND if unused. |
| 17 | KEY7 | input | Touch key input; must be tied to GND if unused. |
| 18 | KEY8 | input | Touch key input; must be tied to GND if unused. |
| 19 | GND | power_in | System ground; all GND pins must be connected. |
| 20 | VDD | power_in | Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected. |
| 21 | LSC | input | Power-saving mode select: floating selects normal mode, GND selects ultra-low power mode. |
| 22 | OMS | input | Output mode select: floating selects 2-wire serial output, GND selects 4-wire binary parallel output. |
| 23 | GND | power_in | System ground; all GND pins must be connected. |
| 24 | DIO | bidirectional | Serial data I/O: data is input on the clock rising edge and output on the falling edge, LSB first; N-MOS open-drain output requires an external 1K-10K pull-up (10K recommended). |
| 25 | SCLK | input | Serial clock input: data is read on the rising edge and output on the falling edge. |
| 26 | STB | input | Strobe input that initializes the serial interface on a rising or falling edge; the first byte after STB goes low is taken as the command, and SCLK is ignored while STB is high. |
| 27 | K0 | input | Input whose data is latched after the display cycle ends; the datasheet specifies a 10 kΩ output pull-down resistance for K0. |
| 28 | BIN0 | output | Binary parallel key-value output. |
| 29 | BIN1 | output | Binary parallel key-value output. |
| 30 | BIN2/CLK | bidirectional | Binary parallel output and two-wire serial clock input with internal pull-up; left floating when OMS is floating. |
| 31 | BIN3/DATA | output | Binary parallel output or serial data N-MOS output with internal pull-up; goes low to signal a key press. |
| 32 | KEY1 | input | Touch key input; must be tied to GND if unused. |
| 33 | KEY2 | input | Touch key input; must be tied to GND if unused. |
| 34 | KEY3 | input | Touch key input; must be tied to GND if unused. |
| 35 | KEY4 | input | Touch key input; must be tied to GND if unused. |
| 36 | VDD | power_in | Supply pin; operating supply range 3.3V to 5.5V, and all VDD pins must be connected. |
| 37 | SEG1/KS1 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 38 | SEG2/KS2 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 39 | SEG3/KS3 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 40 | SEG4/KS4 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 41 | SEG5/KS5 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 42 | SEG6/KS6 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 43 | SEG7/KS7 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 44 | SEG8/KS8 | output | Segment output also used as key-scan line, P-MOS open-drain output. |
| 45 | SEG9 | output | Segment output, P-MOS open-drain output. |
| 46 | SEG10 | output | Segment output, P-MOS open-drain output. |
| 47 | SEG11 | output | Segment output, P-MOS open-drain output. |
| 48 | SEG12 | output | Segment output, P-MOS open-drain output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SSOP-48-300mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 3.3 | 5 | 5.5 | V | Ta=+25C unless noted | 16 |
| Operating temperature | Ta | -40 | 85 | C | 16 | ||
| Operating junction temperature | Tj | -50 | 125 | C | 16 | ||
| Supply voltage (absolute maximum) | VDD | -0.3 | 6.5 | V | relative to system ground | 16 | |
| Logic supply voltage (absolute maximum) | VDD | -0.5 | 7 | V | relative to system ground | 16 | |
| Total power dissipation | Pd | 400 | mW | 16 | |||
| LED SG drive output current | Io1 | -50 | mA | as printed in absolute maximum table | 16 | ||
| LED GR drive output current | Io2 | 200 | mA | as printed in absolute maximum table | 16 | ||
| Operating temperature (absolute maximum) | Topt | -40 | 85 | C | 16 | ||
| Storage temperature | Tstg | -65 | 150 | C | 16 | ||
| High-level output current SG | Ioh1 | -20 | -25 | -40 | mA | Sg1-Sg15, Vo=VDD-2V, VDD=4.5V-5.5V | 16 |
| High-level output current SG | Ioh2 | -20 | -30 | -50 | mA | Sg1-Sg15, Vo=VDD-3V, VDD=4.5V-5.5V | 16 |
| Low-level input current GR | Iol1 | 80 | 140 | mA | Gr1-Gr8, Vo=0.3V, VDD=4.5V-5.5V | 16 | |
| Low-level output current DIO | Idio | 4 | mA | VO=0.4V, dio | 16 | ||
| High-level output current tolerance | Itolsg | 5 | % | VO=VDD-3V, Sg1-Sg15 | 16 | ||
| Input current | Ii | -1 | 1 | uA | VI=VDD/VSS | 16 | |
| Dynamic supply current | IDDdyn | 5 | mA | no load, display off | 16 | ||
| High-level input voltage Clock/Scl/Sda | Vih | 3.5 | 5 | V | VDD=5V | 17 | |
| Low-level input voltage Clock/Scl/Sda | Vil | 0 | 1.5 | V | VDD=5V | 17 | |
| Kout/Data sink current (NMOS) | Iol | 4 | 8 | mA | VDD=3.3V, Vol=0.1VDD | 17 | |
| Kout/Data sink current (NMOS) | Iol | 10 | 20 | mA | VDD=5V, Vol=0.1VDD | 17 | |
| Bin0-Bin3 source current (CMOS) | Ioh | -2 | -4 | mA | VDD=3V, Voh=0.9VDD | 17 | |
| Bin0-Bin3 source current (CMOS) | Ioh | -5 | -10 | mA | VDD=5V, Voh=0.9VDD | 17 | |
| Clock/Kout pull-up resistance | Rph | 20 | 60 | 100 | KΩ | VDD=3.3V | 17 |
| Clock/Kout pull-up resistance | Rph | 10 | 30 | 50 | KΩ | VDD=5V | 17 |
| Operating current | Idd | 1.2 | 1.8 | mA | VDD=3.3V | 17 | |
| Operating current | Idd | 2.2 | 3.3 | mA | VDD=5V | 17 | |
| Propagation delay Sclk to Dio | Tpzl | 300 | ns | Sclk to Dio | 17 | ||
| Propagation delay | Tpzl | 100 | ns | Cl=15pF, Rl=10K Ohm | 17 | ||
| Rise time Sg1-Sg15 | Ttzh1 | 2 | us | Cl=300pF | 17 | ||
| Rise time Gr1-Gr4, Gr8-Gr5 | Ttzh2 | 1 | us | Cl=300pF | 17 | ||
| Fall time | Ttzh | 1 | us | Cl=300pF, Sgn, Grn | 17 | ||
| Maximum clock frequency | Fmax | 1 | MHz | duty cycle 50% | 17 | ||
| Input capacitance | Ci | 15 | pF | 17 | |||
| Key response time normal mode | Tkrt | 100 | 125 | 150 | ms | normal mode | 17 |
| Key response time standby mode | Tkrt | 100 | 150 | 250 | ms | standby mode | 17 |
| Maximum key hold time | Tkh | 60 | 64 | 68 | s | 17 | |
| Normal mode to standby mode time | Tns | 7 | 8 | 9 | s | 17 | |
| Clock low time | Tlow | 20 | us | 17 | |||
| Clock high time | Thigh | 20 | us | 17 | |||
| Data transfer rate | Tbr | 25 | Kbps | 17 | |||
| Data read error retry interval | Ted | 6 | ms | 17 | |||
| Clock pulse width | Pwclk | 400 | ns | 18 | |||
| Strobe pulse width | Pwstb | 1 | us | 18 | |||
| Data setup time | Tsetup | 100 | ns | 18 | |||
| Data hold time | Thold | 100 | ns | 18 | |||
| Sclk to Stb time | Tclk | 1 | us | Sclk rising to Stb rising | 18 | ||
| Wait time | Twait | 1 | us | Sclk rising to Sclk falling | 18 | ||
| Oscillator frequency tolerance (built-in RC, 450KHz) | 5 | % | printed as 450KHz+5% | 1 | |||
| Low-level input voltage | Vil | 0.35 | V | Vh hysteresis, Sclk, Dio, Stb | 16 | ||
| Output pull-down resistance | Rl | 10 | KΩ | K0 | 16 | ||
| Oscillator frequency | Fosc | 500 | KHz | R=16.5 KΩ | 17 |
CAD (KiCad official)
- Symbol:
TM1649 - Footprint:
Package_SO:SSOP-48_7.5x15.9mm_P0.635mm - 3D model: SSOP-48-300mil (KiCad packages3D, STEP)
- 3D model files:
tm1649-etched.step/tm1649-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1649.step/tm1649.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet, copy hosted by LCSC (19 pp, sha256
ef0f42754176e8e6, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).