Generated by kicad-footprint-generator · KiCad file format 20260206
TLV9022QDRQ1
Texas Instruments · Comparators · SOIC-8
TLV9022QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Open-drain output of comparator 1 that can be pulled up from 0 V to 5.5 V independent of the supply and typically sinks up to 125 mA, with the total for all channels kept below 200 mA. |
| 2 | IN1- | input | Inverting input of comparator 1, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails. |
| 3 | IN1+ | input | Noninverting input of comparator 1, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails. |
| 4 | V- | power_in | Negative (low) supply, used as ground for single-supply operation; supply voltage VS = (V+) - (V-) is 1.65 V to 5.5 V. |
| 5 | IN2+ | input | Noninverting input of comparator 2, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails. |
| 6 | IN2- | input | Inverting input of comparator 2, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails. |
| 7 | OUT2 | output | Open-drain output of comparator 2 that can be pulled up from 0 V to 5.5 V independent of the supply and typically sinks up to 125 mA, with the total for all channels kept below 200 mA. |
| 8 | V+ | power_in | Positive supply, 1.65 V to 5.5 V above V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage: VS = (V+), (V-) | VS | 1.65 | 5.5 | V | 6 | ||
| Input voltage range (IN+, IN-) | -0.2 | 5.7 | V | from (V-) | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Supply voltage: VS = (V+), (V-) | -0.3 | 6 | V | 6 | |||
| Input pins (IN+, IN-) | -0.3 | 6 | V | from V- | 6 | ||
| Current into input pins (IN+, IN-) | -10 | 10 | mA | 6 | |||
| Output (OUT) from V-, open drain only | -0.3 | 6 | V | open drain only | 6 | ||
| Output short circuit duration | 10 | s | Short-circuit to V- or V+ | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Input offset voltage | VOS | -1.5 | 0.3 | 1.5 | mV | VS = 1.8V and 5V | 10 |
| Input offset voltage | VOS | -2 | 2 | mV | VS = 1.8V and 5V, TA = -40°C to +125°C | 10 | |
| Input offset voltage drift | dVIO/dT | -0.5 | 0.5 | µV/°C | VS = 1.8V and 5V, TA = -40°C to +125°C | 10 | |
| Quiescent current per comparator | IQ | 16 | 30 | µA | VS = 1.8V and 5V, No Load, Output Low | 10 | |
| Quiescent current per comparator | IQ | 35 | µA | VS = 1.8V and 5V, No Load, Output Low, TA = -40°C to +125°C | 10 | ||
| Power-supply rejection ratio (open drain version) | PSRR | 80 | 95 | dB | VS = 1.8V to 5V, TA = -40°C to +125°C (open drain version) | 10 | |
| Common-mode rejection ratio | CMRR | 60 | 70 | dB | VS = 5V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C | 10 | |
| Common-mode rejection ratio | CMRR | 50 | 60 | dB | VS = 1.8V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C | 10 | |
| Large signal differential voltage amplification | AVD | 50 | 200 | V/mV | For open drain version only | 10 | |
| Voltage swing from (V-) | VOL | 75 | 125 | mV | ISINK = 4mA, TA = 25°C | 10 | |
| Voltage swing from (V-) | VOL | 175 | mV | ISINK = 4mA, TA = -40°C to +125°C | 10 | ||
| Short-circuit current, sinking | ISC | 90 | 100 | mA | VS = 5V, Sinking | 10 | |
| Input bias current | IB | 5 | pA | VCM = VS/2 | 10 | ||
| Input offset current | IOS | 1 | pA | VCM = VS/2 | 10 | ||
| Input capacitance, differential | CID | 2 | pF | VCM = VS/2 | 10 | ||
| Input capacitance, common mode | CIC | 3 | pF | VCM = VS/2 | 10 | ||
| Open-drain output leakage current | ILKG | 100 | pA | VPULLUP = (V+), TA = 25°C (open drain only) | 10 | ||
| Propagation delay time, high-to-low | TPD-HL | 100 | ns | VID = -100mV; RP = 2.5KΩ for open drain only | 11 | ||
| Propagation delay time, low-to-high | TPD-LH | 150 | ns | VID = 100mV; RP = 2.5KΩ for open drain only | 11 | ||
| 5V output fall time, 80% to 20% | TFALL | 3 | ns | VID = -100mV | 11 | ||
| 5V toggle frequency | FTOGGLE | 3 | MHz | VID = 100mV (RP = 2.5KΩ for open drain only) | 11 | ||
| Power on-time | PON | 20 | µs | VS = 1.8V and 5V, VCM = (V-), VID = -0.1V, VPULL-UP = VS / 2 (RP = 2.5KΩ for open drain only) | 11 | ||
| Junction-to-ambient thermal resistance (D, SOIC) | RθJA | 167.7 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (D, SOIC) | RθJC(top) | 107 | °C/W | 7 | |||
| Junction-to-board thermal resistance (D, SOIC) | RθJB | 111.2 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
TLV9022QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlv9022qdrq1-etched.step/tlv9022qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9022qdrq1.step/tlv9022qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (76 pp, sha256
7dbea3618027ae9f, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).