Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV9022QDRQ1

Texas Instruments · Comparators · SOIC-8

TLV9022QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Open-drain output of comparator 1 that can be pulled up from 0 V to 5.5 V independent of the supply and typically sinks up to 125 mA, with the total for all channels kept below 200 mA.
2 IN1- input Inverting input of comparator 1, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails.
3 IN1+ input Noninverting input of comparator 1, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails.
4 V- power_in Negative (low) supply, used as ground for single-supply operation; supply voltage VS = (V+) - (V-) is 1.65 V to 5.5 V.
5 IN2+ input Noninverting input of comparator 2, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails.
6 IN2- input Inverting input of comparator 2, with an input voltage range of (V-) - 0.2 V to 5.7 V and input current limited to 10 mA or less if the input can exceed the rails.
7 OUT2 output Open-drain output of comparator 2 that can be pulled up from 0 V to 5.5 V independent of the supply and typically sinks up to 125 mA, with the total for all channels kept below 200 mA.
8 V+ power_in Positive supply, 1.65 V to 5.5 V above V-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage: VS = (V+), (V-) VS 1.65 5.5 V 6
Input voltage range (IN+, IN-) -0.2 5.7 V from (V-) 6
Ambient temperature TA -40 125 °C 6
Supply voltage: VS = (V+), (V-) -0.3 6 V 6
Input pins (IN+, IN-) -0.3 6 V from V- 6
Current into input pins (IN+, IN-) -10 10 mA 6
Output (OUT) from V-, open drain only -0.3 6 V open drain only 6
Output short circuit duration 10 s Short-circuit to V- or V+ 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Input offset voltage VOS -1.5 0.3 1.5 mV VS = 1.8V and 5V 10
Input offset voltage VOS -2 2 mV VS = 1.8V and 5V, TA = -40°C to +125°C 10
Input offset voltage drift dVIO/dT -0.5 0.5 µV/°C VS = 1.8V and 5V, TA = -40°C to +125°C 10
Quiescent current per comparator IQ 16 30 µA VS = 1.8V and 5V, No Load, Output Low 10
Quiescent current per comparator IQ 35 µA VS = 1.8V and 5V, No Load, Output Low, TA = -40°C to +125°C 10
Power-supply rejection ratio (open drain version) PSRR 80 95 dB VS = 1.8V to 5V, TA = -40°C to +125°C (open drain version) 10
Common-mode rejection ratio CMRR 60 70 dB VS = 5V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 10
Common-mode rejection ratio CMRR 50 60 dB VS = 1.8V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 10
Large signal differential voltage amplification AVD 50 200 V/mV For open drain version only 10
Voltage swing from (V-) VOL 75 125 mV ISINK = 4mA, TA = 25°C 10
Voltage swing from (V-) VOL 175 mV ISINK = 4mA, TA = -40°C to +125°C 10
Short-circuit current, sinking ISC 90 100 mA VS = 5V, Sinking 10
Input bias current IB 5 pA VCM = VS/2 10
Input offset current IOS 1 pA VCM = VS/2 10
Input capacitance, differential CID 2 pF VCM = VS/2 10
Input capacitance, common mode CIC 3 pF VCM = VS/2 10
Open-drain output leakage current ILKG 100 pA VPULLUP = (V+), TA = 25°C (open drain only) 10
Propagation delay time, high-to-low TPD-HL 100 ns VID = -100mV; RP = 2.5KΩ for open drain only 11
Propagation delay time, low-to-high TPD-LH 150 ns VID = 100mV; RP = 2.5KΩ for open drain only 11
5V output fall time, 80% to 20% TFALL 3 ns VID = -100mV 11
5V toggle frequency FTOGGLE 3 MHz VID = 100mV (RP = 2.5KΩ for open drain only) 11
Power on-time PON 20 µs VS = 1.8V and 5V, VCM = (V-), VID = -0.1V, VPULL-UP = VS / 2 (RP = 2.5KΩ for open drain only) 11
Junction-to-ambient thermal resistance (D, SOIC) RθJA 167.7 °C/W 7
Junction-to-case (top) thermal resistance (D, SOIC) RθJC(top) 107 °C/W 7
Junction-to-board thermal resistance (D, SOIC) RθJB 111.2 °C/W 7

CAD (KiCad official)

  • Symbol: TLV9022QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tlv9022qdrq1-etched.step / tlv9022qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv9022qdrq1.step / tlv9022qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (76 pp, sha256 7dbea3618027ae9f, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF