main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv9022l: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tlv9022l: CAD wording names the Adom_Gen land, not KiCad official · Ray
tlv9022l-etched.glb Publish 0.1.0 · Ray
tlv9022l-etched.step tlv9022l: factory component page (tier=mfr) · Ray
tlv9022l-hero.glb tlv9022l: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv9022l-hero.overlay.json Publish 0.1.0 · Ray
tlv9022l.glb Publish 0.1.0 · Ray
tlv9022l.kicad_mod Publish 0.1.0 · Ray
tlv9022l.kicad_sym Publish 0.1.0 · Ray
tlv9022l.lbr Publish 0.1.0 · Ray
tlv9022l.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

TLV9022L

Texas Instruments · IC · X2QFN-10 (RUG)

TLV9022L from Texas Instruments, in a X2QFN-10 (RUG). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 V- power_in Negative supply voltage; the supply range is 1.65V to 5.5V across (V+) and (V-).
2 CLR A input Clear input for comparator A; the output latch resets on a falling edge of this pin.
3 CLR B input Clear input for comparator B; the output latch resets on a falling edge of this pin.
4 IN+ B input Non-inverting (+) input of comparator B, rated from (V-) -0.2V to 5.5V in recommended operation.
5 IN- B input Inverting (-) input of comparator B, rated from (V-) -0.2V to 5.5V in recommended operation.
6 V+ power_in Positive supply voltage; the supply range is 1.65V to 5.5V across (V+) and (V-).
7 OUT B output Output of comparator B; the open-drain or push-pull output depends on the device option.
8 OUT A output Output of comparator A; the open-drain or push-pull output depends on the device option.
9 IN- A input Inverting (-) input of comparator A, rated from (V-) -0.2V to 5.5V in recommended operation.
10 IN+ A input Non-inverting (+) input of comparator A, rated from (V-) -0.2V to 5.5V in recommended operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package X2QFN-10 (RUG)
Category
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) -0.3 6 V VS = (V+), (V-) 5
Supply voltage VS 1.65 5.5 V VS = (V+) - (V-) 5
Input pins (IN+, IN-, CLR) voltage from (V-) -0.3 6 V 5
Input voltage range (IN+, IN-, CLR) from (V-) -0.2 5.5 V 5
Current into input pins (IN+, IN-, CLR) -10 10 mA 5
Output (OUT) voltage from (V-) -0.3 6 V 5
Output (OUT) open drain voltage from (V-) -0.3 V Open drain; maximum printed as (V+) + 0.3 V 5
Output short circuit duration 10 s Short-circuit to (V-) or (V+) 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
ESD human-body model (HBM) V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 5
ESD charged-device model (CDM) V(ESD) -1000 1000 V Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 5
Output voltage range, open drain output, from (V-) 0 5.5 V Open drain output 5
Input common mode voltage range (IN+, IN-) from (V-) -0.2 V Lower limit from (V-); upper limit printed as (V+) + 0.2 V 5
Ambient temperature TA -40 125 °C 5
Input threshold voltage VT -1.75 0.3 1.75 mV VS = 1.8V and 5V 7
Input threshold voltage over temperature VT -2.25 2.25 mV VS = 1.8V and 5V, TA = -40°C to +125°C 7
Input threshold voltage drift dVT/dT -0.5 0.5 µV/°C VS = 1.8V and 5V, TA = -40°C to +125°C 7
Quiescent current per comparator IQ 22 30 µA VS = 1.8V and 5V, No Load, Output Low 7
Quiescent current per comparator over temperature IQ 42 µA VS = 1.8V and 5V, No Load, Output Low, TA = -40°C to +125°C 7
Power-supply rejection ratio (push-pull) PSRR 75 95 dB VS = 1.8V to 5V, TA = -40°C to +125°C (push-pull only) 7
Power-supply rejection ratio (open drain) PSRR 80 95 dB VS = 1.8V to 5V, TA = -40°C to +125°C (open drain only) 7
Common-mode rejection ratio CMRR 60 70 dB VS = 5V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 7
Common-mode rejection ratio CMRR 50 60 dB VS = 1.8V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C 7
Common-mode voltage range VCM-Range -0.2 V VS = 1.8V and 5V, TA = -40°C to +125°C; lower limit from (V-), upper limit (V+) + 0.2 V 7
Voltage swing from (V-) low output VOL 75 125 mV ISINK = 4mA, TA = 25°C 7
Voltage swing from (V-) low output over temperature VOL 175 mV ISINK = 4mA, TA = -40°C to +125°C 7
Short-circuit current sinking ISC 75 85 mA VS = 5V, Sinking 7
Clear fall to latch reset propagation delay TPD-CLR-F 25 70 ns CLR = 1.8V to 5V, delay from CLR falling edge to unlatched output condition 8
Minimum clear hold pulse time CLR_Min 10 ns CLR = 1.8V to 5V, minimum CLR pulse size to register latch reset on CLR falling edge 8
Junction-to-ambient thermal resistance (RUG) RqJA 222.8 °C/W 6
Junction-to-case (top) thermal resistance (RUG) RqJC(top) 94.2 °C/W 6
Junction-to-board thermal resistance (RUG) RqJB 147.1 °C/W 6
Junction-to-top characterization parameter (RUG) yJT 3.4 °C/W 6
Junction-to-board characterization parameter (RUG) yJB 146.4 °C/W 6

CAD (Adom-generated)

  • Symbol: TLV9022L
  • Footprint: Adom_Gen:Texas_Instruments_TLV9022
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv9022l-etched.step / tlv9022l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv9022l.step / tlv9022l.glb are the bare package body.

Provenance

No distributor stocks TLV9022L yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 a8706fdf8ff72411, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF