component
TLV9022L
Public Made by Adomby adom
Texas Instruments , X2QFN-10 (RUG). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV9022L
Texas Instruments · IC · X2QFN-10 (RUG)
TLV9022L from Texas Instruments, in a X2QFN-10 (RUG). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V- | power_in | Negative supply voltage; the supply range is 1.65V to 5.5V across (V+) and (V-). |
| 2 | CLR A | input | Clear input for comparator A; the output latch resets on a falling edge of this pin. |
| 3 | CLR B | input | Clear input for comparator B; the output latch resets on a falling edge of this pin. |
| 4 | IN+ B | input | Non-inverting (+) input of comparator B, rated from (V-) -0.2V to 5.5V in recommended operation. |
| 5 | IN- B | input | Inverting (-) input of comparator B, rated from (V-) -0.2V to 5.5V in recommended operation. |
| 6 | V+ | power_in | Positive supply voltage; the supply range is 1.65V to 5.5V across (V+) and (V-). |
| 7 | OUT B | output | Output of comparator B; the open-drain or push-pull output depends on the device option. |
| 8 | OUT A | output | Output of comparator A; the open-drain or push-pull output depends on the device option. |
| 9 | IN- A | input | Inverting (-) input of comparator A, rated from (V-) -0.2V to 5.5V in recommended operation. |
| 10 | IN+ A | input | Non-inverting (+) input of comparator A, rated from (V-) -0.2V to 5.5V in recommended operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | X2QFN-10 (RUG) |
| Category | |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | -0.3 | 6 | V | VS = (V+), (V-) | 5 | ||
| Supply voltage | VS | 1.65 | 5.5 | V | VS = (V+) - (V-) | 5 | |
| Input pins (IN+, IN-, CLR) voltage from (V-) | -0.3 | 6 | V | 5 | |||
| Input voltage range (IN+, IN-, CLR) from (V-) | -0.2 | 5.5 | V | 5 | |||
| Current into input pins (IN+, IN-, CLR) | -10 | 10 | mA | 5 | |||
| Output (OUT) voltage from (V-) | -0.3 | 6 | V | 5 | |||
| Output (OUT) open drain voltage from (V-) | -0.3 | V | Open drain; maximum printed as (V+) + 0.3 V | 5 | |||
| Output short circuit duration | 10 | s | Short-circuit to (V-) or (V+) | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD human-body model (HBM) | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD charged-device model (CDM) | V(ESD) | -1000 | 1000 | V | Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 | 5 | |
| Output voltage range, open drain output, from (V-) | 0 | 5.5 | V | Open drain output | 5 | ||
| Input common mode voltage range (IN+, IN-) from (V-) | -0.2 | V | Lower limit from (V-); upper limit printed as (V+) + 0.2 V | 5 | |||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Input threshold voltage | VT | -1.75 | 0.3 | 1.75 | mV | VS = 1.8V and 5V | 7 |
| Input threshold voltage over temperature | VT | -2.25 | 2.25 | mV | VS = 1.8V and 5V, TA = -40°C to +125°C | 7 | |
| Input threshold voltage drift | dVT/dT | -0.5 | 0.5 | µV/°C | VS = 1.8V and 5V, TA = -40°C to +125°C | 7 | |
| Quiescent current per comparator | IQ | 22 | 30 | µA | VS = 1.8V and 5V, No Load, Output Low | 7 | |
| Quiescent current per comparator over temperature | IQ | 42 | µA | VS = 1.8V and 5V, No Load, Output Low, TA = -40°C to +125°C | 7 | ||
| Power-supply rejection ratio (push-pull) | PSRR | 75 | 95 | dB | VS = 1.8V to 5V, TA = -40°C to +125°C (push-pull only) | 7 | |
| Power-supply rejection ratio (open drain) | PSRR | 80 | 95 | dB | VS = 1.8V to 5V, TA = -40°C to +125°C (open drain only) | 7 | |
| Common-mode rejection ratio | CMRR | 60 | 70 | dB | VS = 5V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C | 7 | |
| Common-mode rejection ratio | CMRR | 50 | 60 | dB | VS = 1.8V, (V-), 0.2V < VCM < (V+) + 0.2V, TA = -40°C to +125°C | 7 | |
| Common-mode voltage range | VCM-Range | -0.2 | V | VS = 1.8V and 5V, TA = -40°C to +125°C; lower limit from (V-), upper limit (V+) + 0.2 V | 7 | ||
| Voltage swing from (V-) low output | VOL | 75 | 125 | mV | ISINK = 4mA, TA = 25°C | 7 | |
| Voltage swing from (V-) low output over temperature | VOL | 175 | mV | ISINK = 4mA, TA = -40°C to +125°C | 7 | ||
| Short-circuit current sinking | ISC | 75 | 85 | mA | VS = 5V, Sinking | 7 | |
| Clear fall to latch reset propagation delay | TPD-CLR-F | 25 | 70 | ns | CLR = 1.8V to 5V, delay from CLR falling edge to unlatched output condition | 8 | |
| Minimum clear hold pulse time | CLR_Min | 10 | ns | CLR = 1.8V to 5V, minimum CLR pulse size to register latch reset on CLR falling edge | 8 | ||
| Junction-to-ambient thermal resistance (RUG) | RqJA | 222.8 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (RUG) | RqJC(top) | 94.2 | °C/W | 6 | |||
| Junction-to-board thermal resistance (RUG) | RqJB | 147.1 | °C/W | 6 | |||
| Junction-to-top characterization parameter (RUG) | yJT | 3.4 | °C/W | 6 | |||
| Junction-to-board characterization parameter (RUG) | yJB | 146.4 | °C/W | 6 |
CAD (Adom-generated)
- Symbol:
TLV9022L - Footprint:
Adom_Gen:Texas_Instruments_TLV9022 - 3D model: generated to fit the land (STEP)
- 3D model files:
tlv9022l-etched.step/tlv9022l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv9022l.step/tlv9022l.glbare the bare package body.
Provenance
No distributor stocks TLV9022L yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
a8706fdf8ff72411, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.