main
Ray Publish 0.1.0 1343dec

TLV840NADL35DBVR

Texas Instruments · Monitors & Reset Circuits · SOT-23-5

TLV840NADL35DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active-low open-drain reset output that is driven low when VDD falls below the negative threshold VIT- and stays low for the delay time tD after VDD rises above VIT+ = VIT- + VHYS.
2 VDD power_in Input supply voltage monitored by the TLV840, with recommended operating range 0.7 V to 6 V.
3 GND power_in Ground.
4 NC unconnected No connect on the TLV840N variant; the pin can be left floating, with recommended connection to GND.
5 NC unconnected No connect on the TLV840N variant (no CT pin, fixed delay); the pin can be left floating, with recommended connection to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VDD 0.7 6 V TLV840xxxL 6
Negative-going input threshold accuracy VIT- -2 0.5 2 % VIT- = 1.8 V to 5.4 V 6
Hysteresis on VIT- VHYS 2.5 5 7 % 6
Supply current into VDD pin IDD 0.15 0.4 µA VDD = 6 V, VIT- = 0.8 V to 5.5 V, TA = -40℃ to 85℃ 6
Supply current into VDD pin IDD 0.15 1.2 µA VDD = 6 V, VIT- = 0.8 V to 5.5 V 6
Power on Reset Voltage VPOR 700 mV VOL(max) = 300 mV, IOUT(Sink) = 15 µA 6
Low level output voltage VOL 300 mV VDD = 3.3 V, 3.4 V ≤ VIT- ≤ 5.5 V, IOUT(Sink) = 2 mA 6
Open-Drain output leakage current Ilkg(OD) 10 100 nA VDD = VPULLUP = 6V, TA = -40℃ to 85℃ 6
Open-Drain output leakage current Ilkg(OD) 10 350 nA VDD = VPULLUP = 6V 6
Propagation detect delay for VDD falling below VIT- tP_HL 30 50 µs VDD : (VIT+ + 10%) to (VIT-, 10%) 7
Reset time delay tD 40 80 µs TLV840xA CT pin = Open or NC, (VIT- - 10%) to (VIT+ + 10%) 7
Glitch immunity tGI_VIT- 10 µs 5% VIT- overdrive 7
Supply voltage VDD -0.3 6.5 V 5
RESET pin voltage (open-drain) RESET -0.3 6.5 V TLV840xxDL 5
RESET pin current -20 20 mA 5
Operating ambient temperature TA -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
ESD HBM V(ESD) -2000 2000 V Human body model, ANSI/ESDA/JEDEC JS-001 5
ESD CDM V(ESD) -750 750 V Charged device model, JESD22-C101 5
Supply voltage VDD 0.7 6 V TLV840xxxL 5
RESET pin voltage RESET 0 6 V TLV840xxxL 5
RESET pin current -5 5 mA 5
Operating ambient temperature TA -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 193.5 °C/W DBV (SOT23-5), 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 117.9 °C/W DBV (SOT23-5) 5
Junction-to-board thermal resistance RθJB 98.5 °C/W DBV (SOT23-5) 5
Junction-to-top characterization parameter ψJT 43.4 °C/W DBV (SOT23-5) 5
Junction-to-board characterization parameter ψJB 97.8 °C/W DBV (SOT23-5) 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV840NADL35DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv840nadl35dbvr-etched.step / tlv840nadl35dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv840nadl35dbvr.step / tlv840nadl35dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 421031b7665e6c44, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF