3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTLV840NADL35DBVR
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
TLV840NADL35DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low open-drain reset output that is driven low when VDD falls below the negative threshold VIT- and stays low for the delay time tD after VDD rises above VIT+ = VIT- + VHYS. |
| 2 | VDD | power_in | Input supply voltage monitored by the TLV840, with recommended operating range 0.7 V to 6 V. |
| 3 | GND | power_in | Ground. |
| 4 | NC | unconnected | No connect on the TLV840N variant; the pin can be left floating, with recommended connection to GND. |
| 5 | NC | unconnected | No connect on the TLV840N variant (no CT pin, fixed delay); the pin can be left floating, with recommended connection to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VDD | 0.7 | 6 | V | TLV840xxxL | 6 | |
| Negative-going input threshold accuracy | VIT- | -2 | 0.5 | 2 | % | VIT- = 1.8 V to 5.4 V | 6 |
| Hysteresis on VIT- | VHYS | 2.5 | 5 | 7 | % | 6 | |
| Supply current into VDD pin | IDD | 0.15 | 0.4 | µA | VDD = 6 V, VIT- = 0.8 V to 5.5 V, TA = -40℃ to 85℃ | 6 | |
| Supply current into VDD pin | IDD | 0.15 | 1.2 | µA | VDD = 6 V, VIT- = 0.8 V to 5.5 V | 6 | |
| Power on Reset Voltage | VPOR | 700 | mV | VOL(max) = 300 mV, IOUT(Sink) = 15 µA | 6 | ||
| Low level output voltage | VOL | 300 | mV | VDD = 3.3 V, 3.4 V ≤ VIT- ≤ 5.5 V, IOUT(Sink) = 2 mA | 6 | ||
| Open-Drain output leakage current | Ilkg(OD) | 10 | 100 | nA | VDD = VPULLUP = 6V, TA = -40℃ to 85℃ | 6 | |
| Open-Drain output leakage current | Ilkg(OD) | 10 | 350 | nA | VDD = VPULLUP = 6V | 6 | |
| Propagation detect delay for VDD falling below VIT- | tP_HL | 30 | 50 | µs | VDD : (VIT+ + 10%) to (VIT-, 10%) | 7 | |
| Reset time delay | tD | 40 | 80 | µs | TLV840xA CT pin = Open or NC, (VIT- - 10%) to (VIT+ + 10%) | 7 | |
| Glitch immunity | tGI_VIT- | 10 | µs | 5% VIT- overdrive | 7 | ||
| Supply voltage | VDD | -0.3 | 6.5 | V | 5 | ||
| RESET pin voltage (open-drain) | RESET | -0.3 | 6.5 | V | TLV840xxDL | 5 | |
| RESET pin current | -20 | 20 | mA | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD CDM | V(ESD) | -750 | 750 | V | Charged device model, JESD22-C101 | 5 | |
| Supply voltage | VDD | 0.7 | 6 | V | TLV840xxxL | 5 | |
| RESET pin voltage | RESET | 0 | 6 | V | TLV840xxxL | 5 | |
| RESET pin current | -5 | 5 | mA | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 193.5 | °C/W | DBV (SOT23-5), 5 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 117.9 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 98.5 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 43.4 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 97.8 | °C/W | DBV (SOT23-5) | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV840NADL35DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv840nadl35dbvr-etched.step/tlv840nadl35dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv840nadl35dbvr.step/tlv840nadl35dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
421031b7665e6c44, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).