main
Ray Publish 0.1.0 1e42d84

TLV840CADL11DBVR

Texas Instruments · Monitors & Reset Circuits · SOT-23-5

TLV840CADL11DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET output Active-low open-drain reset output (DL option) is driven low when VDD falls below VIT- and stays asserted for the delay time tD after VDD rises above VIT+ (VIT- + VHYS); the RESET pin current is rated at -20 mA to 20 mA.
2 VDD power_in Input supply voltage that the supervisor monitors, with a recommended range of 0.7 V to 6 V and an absolute maximum of 6.5 V.
3 GND power_in Ground reference pin for the device.
4 NC unconnected No connect pin that can be left floating; the datasheet recommends connecting it to GND.
5 CT passive Capacitor time delay pin where an external capacitor sets the reset delay tD; leaving it floating gives the smallest fixed delay of 40 µs typical, and the datasheet recommends connecting it to GND when not used.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Negative-going input threshold accuracy VIT- -2.5 0.5 2.5 % VIT- = 0.8 V to 1.7 V 6
Hysteresis on VIT- pin VHYS 2.5 5 7 % 6
Supply current into VDD pin IDD 0.12 0.3 µA VDD = 2 V, VIT- = 0.8 V to 1.8 V 6
Supply current into VDD pin IDD 0.12 1 µA VDD = 2 V, VIT- = 0.8 V to 1.8 V, TA = -40℃ to 85℃ 6
Supply current into VDD pin IDD 0.15 0.4 µA VDD = 6 V, VIT- = 0.8 V to 5.5 V 6
Supply current into VDD pin IDD 0.15 1.2 µA VDD = 6 V, VIT- = 0.8 V to 5.5 V, TA = -40℃ to 85℃ 6
Open-drain output leakage current Ilkg(OD) 10 100 nA VDD = VPULLUP = 6V, TA = -40℃ to 85℃ 6
Open-drain output leakage current Ilkg(OD) 10 350 nA VDD = VPULLUP = 6V 6
Low level output voltage VOL 300 mV VDD = 0.7 V, 0.8 V ≤ VIT- ≤ 1.5 V, IOUT(Sink) = 15 µA 6
Power on Reset Voltage VPOR 700 mV VOL(max) = 300 mV, IOUT(Sink) = 15 µA 6
Input supply voltage VDD 0.7 6 V TLV840xxxL 5
CT, RESET, MR voltage 0 6 V CT, RESET (TLV840xxxL), MR 5
RESET pin current -5 5 mA 5
Operating ambient temperature TA -40 125 ℃ 5
Voltage VDD VDD -0.3 6.5 V 5
RESET voltage (TLV840xxDL) RESET -0.3 6.5 V TLV840xxDL 5
Current RESET, RESET pin -20 20 mA 5
Operating ambient temperature TA -40 125 ℃ 5
Storage temperature Tstg -65 150 ℃ 5
Junction-to-ambient thermal resistance RθJA 193.5 °C/W DBV (SOT23-5) 5
Junction-to-case (top) thermal resistance RθJC(top) 117.9 °C/W DBV (SOT23-5) 5
Junction-to-board thermal resistance RθJB 98.5 °C/W DBV (SOT23-5) 5
Junction-to-top characterization parameter ψJT 43.4 °C/W DBV (SOT23-5) 5
Junction-to-board characterization parameter ψJB 97.8 °C/W DBV (SOT23-5) 5
Propagation detect delay for VDD falling below VIT- tP_HL 30 50 µs VDD : (VIT+ + 10%) to (VIT-, 10%) 7
Reset time delay tD 40 80 µs TLV840xA, CT pin = Open or NC, (VIT- - 10%) to (VIT+ + 10%) 7
Glitch immunity VIT- 5% VIT- overdrive tGI_VIT- 10 µs VIT- 5% VIT- overdrive 7
Internal CT pin resistance RCT 500 kΩ 6

CAD (KiCad official)

  • Symbol: TLV840CADL11DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv840cadl11dbvr-etched.step / tlv840cadl11dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv840cadl11dbvr.step / tlv840cadl11dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 421031b7665e6c44, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF