Generated by kicad-footprint-generator · KiCad file format 20260206
TLV840CADL11DBVR
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
TLV840CADL11DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low open-drain reset output (DL option) is driven low when VDD falls below VIT- and stays asserted for the delay time tD after VDD rises above VIT+ (VIT- + VHYS); the RESET pin current is rated at -20 mA to 20 mA. |
| 2 | VDD | power_in | Input supply voltage that the supervisor monitors, with a recommended range of 0.7 V to 6 V and an absolute maximum of 6.5 V. |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | NC | unconnected | No connect pin that can be left floating; the datasheet recommends connecting it to GND. |
| 5 | CT | passive | Capacitor time delay pin where an external capacitor sets the reset delay tD; leaving it floating gives the smallest fixed delay of 40 µs typical, and the datasheet recommends connecting it to GND when not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Negative-going input threshold accuracy | VIT- | -2.5 | 0.5 | 2.5 | % | VIT- = 0.8 V to 1.7 V | 6 |
| Hysteresis on VIT- pin | VHYS | 2.5 | 5 | 7 | % | 6 | |
| Supply current into VDD pin | IDD | 0.12 | 0.3 | µA | VDD = 2 V, VIT- = 0.8 V to 1.8 V | 6 | |
| Supply current into VDD pin | IDD | 0.12 | 1 | µA | VDD = 2 V, VIT- = 0.8 V to 1.8 V, TA = -40℃ to 85℃ | 6 | |
| Supply current into VDD pin | IDD | 0.15 | 0.4 | µA | VDD = 6 V, VIT- = 0.8 V to 5.5 V | 6 | |
| Supply current into VDD pin | IDD | 0.15 | 1.2 | µA | VDD = 6 V, VIT- = 0.8 V to 5.5 V, TA = -40℃ to 85℃ | 6 | |
| Open-drain output leakage current | Ilkg(OD) | 10 | 100 | nA | VDD = VPULLUP = 6V, TA = -40℃ to 85℃ | 6 | |
| Open-drain output leakage current | Ilkg(OD) | 10 | 350 | nA | VDD = VPULLUP = 6V | 6 | |
| Low level output voltage | VOL | 300 | mV | VDD = 0.7 V, 0.8 V ≤ VIT- ≤ 1.5 V, IOUT(Sink) = 15 µA | 6 | ||
| Power on Reset Voltage | VPOR | 700 | mV | VOL(max) = 300 mV, IOUT(Sink) = 15 µA | 6 | ||
| Input supply voltage | VDD | 0.7 | 6 | V | TLV840xxxL | 5 | |
| CT, RESET, MR voltage | 0 | 6 | V | CT, RESET (TLV840xxxL), MR | 5 | ||
| RESET pin current | -5 | 5 | mA | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | ℃ | 5 | ||
| Voltage VDD | VDD | -0.3 | 6.5 | V | 5 | ||
| RESET voltage (TLV840xxDL) | RESET | -0.3 | 6.5 | V | TLV840xxDL | 5 | |
| Current RESET, RESET pin | -20 | 20 | mA | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | ℃ | 5 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 193.5 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 117.9 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 98.5 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 43.4 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 97.8 | °C/W | DBV (SOT23-5) | 5 | ||
| Propagation detect delay for VDD falling below VIT- | tP_HL | 30 | 50 | µs | VDD : (VIT+ + 10%) to (VIT-, 10%) | 7 | |
| Reset time delay | tD | 40 | 80 | µs | TLV840xA, CT pin = Open or NC, (VIT- - 10%) to (VIT+ + 10%) | 7 | |
| Glitch immunity VIT- 5% VIT- overdrive | tGI_VIT- | 10 | µs | VIT- 5% VIT- overdrive | 7 | ||
| Internal CT pin resistance | RCT | 500 | kΩ | 6 |
CAD (KiCad official)
- Symbol:
TLV840CADL11DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv840cadl11dbvr-etched.step/tlv840cadl11dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv840cadl11dbvr.step/tlv840cadl11dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
421031b7665e6c44, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).