component
TLV77333PDQNR
Public Made by Adomby adom
Texas Instruments , X2SON-4(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV77333PDQNR
Texas Instruments · IC · X2SON-4(1x1)
TLV77333PDQNR from Texas Instruments, in a X2SON-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage; requires a low-ESR capacitor to ground for stability (0.47µF to 40µF effective), placed close to OUT and GND, with an internal pulldown resistor discharging VOUT when VEN < VEN(LOW). |
| 2 | GND | power_in | Common ground. |
| 3 | EN | input | Enable input; a low voltage (< VEN(LOW)) turns the regulator off and discharges the output to GND, and a high voltage (> VEN(HI)) enables the regulator output. |
| 4 | IN | power_in | Input voltage supply (1.4V to 5.5V); use the nominal 1µF or larger capacitor from IN to ground placed close to the IN and GND pins for best transient response. |
| 5 | Thermal Pad | passive | Thermal pad for the X2SON package; connect to GND or leave floating, do not connect to any potential other than GND, and connect to a large-area ground plane for best thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | X2SON-4(1x1) |
| Category | |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVOUT | -2 | 2 | % | 1.8V ≤ VOUT ≤ 3.3V | 5 | |
| Output voltage tolerance | ΔVOUT | -2.5 | 2.5 | % | TJ = -40℃ to 85℃, 2.5V ≤ VOUT ≤ 3.3V | 5 | |
| Line regulation | ΔVOUT/ΔVIN | 0.01 | 0.1 | %/V | VIN = (VOUT(NOM) + 0.5V) to 5.5V | 5 | |
| Load regulation | ΔVOUT/ΔIOUT | 85 | 110 | µV/mA | IOUT = 1mA to 300mA | 5 | |
| Quiescent ground current | IGND | 80 | 120 | µA | VEN = VIN = 5.5V, IOUT = 0mA, TJ = -40°C to 85°C | 5 | |
| Shutdown ground current | ISHDN | 0.01 | 2 | µA | VEN < VEN(LOW), VIN = 5.5V, TJ = -40°C to 85°C | 5 | |
| Dropout voltage | VDO | 180 | 210 | mV | IOUT = 300mA, VIN = VOUT(NOM), 2.8V ≤ VOUT ≤ 3.3V, DQN package | 5 | |
| Dropout voltage | VDO | 245 | mV | IOUT = 300mA, VIN = VOUT(NOM), TJ = -40°C to 85°C, 2.8V ≤ VOUT ≤ 3.3V, DQN package | 5 | ||
| Output current limit | ICL | 350 | 720 | mA | VOUT = 0.9 x VOUT(NOM), TJ = -40°C to 85°C | 5 | |
| Low input threshold | VEN(LOW) | 0.3 | V | VEN falling until the output is disabled. TJ = -40°C to 85°C | 6 | ||
| High input threshold | VEN(HI) | 0.9 | V | VEN rising until the output is enabled. TJ = -40°C to 85°C | 6 | ||
| EN input leakage current | IEN | 0.01 | 1 | µA | VEN = 5.5V and VIN = 5.5V | 6 | |
| Short-circuit current limit | ISC | 65 | mA | VOUT = 0V | 5 | ||
| Power-supply rejection ratio | PSRR | 80 | dB | IOUT = 1mA, VIN = VOUT + 1.0V, f = 217Hz | 5 | ||
| Power-supply rejection ratio | PSRR | 72 | dB | IOUT = 1mA, VIN = VOUT + 1.0V, f = 1kHz | 5 | ||
| Output noise voltage | VN | 75 | µVRMS | BW = 10Hz to 100kHz, IOUT = 50mA; printed as 75 x VOUT | 5 | ||
| Power-supply rejection ratio | PSRR | 56 | dB | IOUT = 50mA, VIN = VOUT + 1.0V, f = 100kHz | 5 | ||
| Power-supply rejection ratio | PSRR | 55 | dB | IOUT = 50mA, VIN = VOUT + 1.0V, f = 1MHz | 5 | ||
| Output automatic discharge pulldown resistance | RPULLDOWN | 135 | Ω | VEN < VEN(LOW) (output disabled), VIN = 3.3V | 5 | ||
| Thermal shutdown rising | TSD | 160 | °C | TJ rising | 6 | ||
| Thermal shutdown falling | TSD | 140 | °C | TJ falling | 6 | ||
| Start-up time | tSTR | 400 | µs | From VEN > VEN(HI) to VOUT = 95% of VOUT(NOM), VIN rise time = 1V/µs | 6 | ||
| Input voltage | VIN | -0.3 | 6.5 | V | 4 | ||
| Output voltage | VOUT | -0.3 | 6 | V | 6.0 or VIN + 0.3 (lesser) | 4 | |
| Enable voltage | VEN | -0.3 | 6.5 | V | 4 | ||
| Operating junction temperature | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -1000 | 1000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 4 | |
| Input supply voltage | VIN | 1.4 | 5.5 | V | 4 | ||
| Enable input voltage | VEN | 0 | 5.5 | V | 4 | ||
| Output current | IOUT | 0 | 300 | mA | 4 | ||
| Input capacitor | CIN | 1 | µF | 4 | |||
| Output capacitance | COUT | 0.47 | 40 | µF | Effective capacitance | 4 | |
| Output capacitor ESR | ESR | 100 | mΩ | 4 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 236.2 | °C/W | DQN (X2SON) 4 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 218.5 | °C/W | DQN (X2SON) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 180.8 | °C/W | DQN (X2SON) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 16.1 | °C/W | DQN (X2SON) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 179.6 | °C/W | DQN (X2SON) | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 157.2 | °C/W | DQN (X2SON) | 5 |
CAD (KiCad official)
- Symbol:
TLV77333PDQNR - Footprint:
Package_SON:Texas_X2SON-4_1x1mm_P0.65mm - 3D model: X2SON-4(1x1), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.4 mm nominal X2SON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tlv77333pdqnr-etched.step/tlv77333pdqnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv77333pdqnr.step/tlv77333pdqnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
ca5860361e44f9bd, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).