component

TLV76708DGNR

Public Made by Adom

by adom

Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)tlv76708dgnrfactory-2.0.0extractor-text

Verified TLV76708DGNR

by Ray · last 5 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 1 record

5 Nov 2026RayPublished by the parts factory: tier mfr, 9 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: TLV76708DGNR · HVSSOP-8 · 9 pins
  • ✓copper: 9 copper pads, none touching another net
  • ✓datasheet: all 9 pin names found in the 44-page datasheet
  • ✓distributor: lcsc C3744983, digikey 296-TLV76708DGNRTR-ND, mouser 595-TLV76708DGNR
  • ✓family: HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-b9bc1j7y/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 9 pins = 9 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 9 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ tlv76708dgnr.kicad_sym✓ tlv76708dgnr.kicad_mod✓ tlv76708dgnr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV76708DGNR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8

TLV76708DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output pin; use the recommended output capacitor from the Recommended Operating Conditions table (1 µF to 220 µF, ESR 2 mΩ to 500 mΩ) and place it as close to OUT and GND as possible.
2 SNS input Output sense pin for the fixed-voltage version; connect it to OUT, or to the load for remote sensing, and do not float it.
3 NC unconnected Not connected pin labeled NC in Figure 5-4; the datasheet states no function for it.
4 GND power_in Ground pin; all ground pins must be grounded.
5 EN input Enable pin; driving it high enables the device and driving it low disables it, with an internal pullup and an absolute maximum VEN of -0.3 V to 18 V.
6 GND power_in Ground pin; all ground pins must be grounded.
7 NC unconnected Not connected pin labeled NC in Figure 5-4; the datasheet states no function for it.
8 IN power_in Input pin; place the input capacitor as close to the IN and GND pins as possible, with VIN rated 2.5 V to 16 V in the Recommended Operating Conditions.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8
Category Power Management (PMIC)
Pins 9

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper • Use copper planes for device connections to IN, OUT, and GND pins to optimize thermal performance 24

CAD (KiCad official)

  • Symbol: TLV76708DGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tlv76708dgnr-etched.step / tlv76708dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv76708dgnr.step / tlv76708dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 aed3fd87aee66ba5, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF