TLV767

{
  "schema_version": 1,
  "type": "component",
  "slug": "tlv767",
  "title": "TLV767",
  "brief": "TI 1 A linear regulator, WSON-6. Wide 2.5-16 V input, adjustable or fixed, enable + thermal shutdown. Datasheet-verified.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power",
    "ldo",
    "linear-regulator",
    "wide-input",
    "wson-6",
    "texas-instruments"
  ],
  "component": {
    "mpn": "TLV767",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6",
    "pin_count": 7,
    "category": "Power Management",
    "subcategory": "LDO regulator",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv767.pdf",
    "parts": {
      "symbol": "tlv767.kicad_sym",
      "footprint": "tlv767.kicad_mod",
      "model_3d": "tlv767-etched.glb",
      "model_3d_plain": "tlv767.glb",
      "model_3d_step": "tlv767-etched.step",
      "model_3d_step_plain": "tlv767.step",
      "lbr": "tlv767.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output. Place the recommended output capacitor (1 µF to 220 µF ceramic, 2 to 500 mΩ ESR) as close to OUT and GND as possible. Delivers up to 1 A for VIN ≥ 3 V."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin. Input to the control-loop error amplifier used to set the output voltage via an external resistor divider (VREF = 0.8 V). Do not float. Adjustable-voltage version devices only."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return. All ground pins must be grounded. Pins 3 and 5 are both GND on the WSON package."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Drive high (VIH ≥ 1.2 V) to enable the regulator, low (VIL ≤ 0.4 V) to shut down (ISHUTDOWN ≈ 1.5 µA). Has an internal pull-up (≈400 nA); may be tied to IN to auto-enable."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return. Second ground pin on the WSON-6 package; tie together with pin 3 to the ground plane."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply. 2.5 V to 16 V absolute operating range (18 V abs max). Place a ≥1 µF ceramic input capacitor as close to IN and GND as possible."
      },
      {
        "number": "7",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Exposed thermal pad. Connect to ground or leave floating; tying to a large-area ground plane provides best thermal performance."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tlv767.pdf",
        "pages": 44,
        "sha256": "2c432494c13df3c0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlv767.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlv767-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "63654801d03c5c74b981da4221372c42c620f842af7ef0cfdb0f52123652add5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Type": "Linear regulator (LDO)",
      "Input": "2.5-16 V",
      "Output current": "1 A",
      "Output": "Adjustable (FB) or fixed",
      "Dropout": "~330 mV at 1 A",
      "Protection": "Current limit, thermal shutdown",
      "Enable": "EN pin",
      "Package": "WSON-6"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlv767",
    "1a ldo",
    "wide input ldo",
    "16v linear regulator"
  ],
  "discovery_pitch": "TI TLV767 1 A wide-input LDO (WSON-6) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv767.kicad_sym",
    "tlv767.kicad_mod",
    "tlv767.glb",
    "tlv767.step",
    "tlv767.lbr",
    "docs/hero.png",
    "docs/tlv767-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlv767-etched.step"
  ],
  "variants": [
    {
      "mpn": "TLV76701DRVR (adjustable, WSON-6)",
      "kind": "different-part"
    },
    {
      "mpn": "TLV767xxDRVR (fixed options)",
      "kind": "packaging"
    }
  ]
}