main
History Download
Ray Publish 0.1.0 c92570b

TLV75901PDRVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)

TLV75901PDRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage pin that requires a capacitor from OUT to ground for stability, using the nominal recommended value or a larger ceramic capacitor, placed as close to the device as possible.
2 FB input Feedback input to the control loop error amplifier that sets the output voltage, with an adjustable output range of 0.55 V to 5.5 V.
3 GND power_in Ground pin.
4 EN input Enable pin: drive EN above VEN(HI) to turn on the regulator and below VEN(LO) to put the LDO into shutdown, with an enable voltage range of 0 V to 6.0 V.
5 DNC unconnected Do not connect.
6 IN power_in Input pin with an input voltage range of 1.5 V to 6.0 V, which requires the recommended value or larger ceramic capacitor from IN to ground placed close to the device.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VIN -0.3 6.5 V 3
Enable voltage VEN -0.3 6.5 V 3
Output voltage VOUT -0.3 V Max is VIN + 0.3 V or 6.0 V, whichever is smaller 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
Input voltage VIN 1.5 6 V 4
Output voltage VOUT 0.55 5.5 V 4
Output current IOUT 0 1 A 4
Input capacitor CIN 1 μF 4
Output capacitor COUT 1 220 μF 4
Enable voltage VEN 0 6 V 4
Enable toggle frequency fEN 10 kHz 4
Junction temperature TJ -40 125 °C 4
Output accuracy -0.7 0.7 % TJ = 25°C 4
Output accuracy -1 1 % -40°C ≤ TJ ≤ +85°C 4
Output accuracy -1.5 1.5 % -40°C ≤ TJ ≤ +125°C 4
Line regulation 2 7.5 mV VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V 4
Ground current IGND 10 25 µA IOUT = 0 mA, TJ = 25°C 4
Ground current IGND 35 µA IOUT = 0 mA, -40°C ≤ TJ ≤ +125°C 4
Shutdown current ISHDN 0.1 1 µA VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V 4
Output current limit ICL 1.22 1.44 1.83 A VIN = VOUT(NOM) + 1.0 V, VOUT = VOUT(NOM) - 0.2 V, VOUT < 1.5 V 5
Dropout voltage VDO 896 1050 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.65 V ≤ VOUT < 0.8 V 5
Dropout voltage VDO 765 920 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.8 V ≤ VOUT < 0.9 V 5
Dropout voltage VDO 700 850 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.9 V ≤ VOUT < 1.0 V 5
Dropout voltage VDO 600 750 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.0 V ≤ VOUT < 1.2 V 5
Dropout voltage VDO 464 585 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.2 V ≤ VOUT < 1.5 V 5
Dropout voltage VDO 332 440 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.5 V ≤ VOUT < 1.8 V 5
Dropout voltage VDO 264 360 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.8 V ≤ VOUT < 2.5 V 5
Dropout voltage VDO 193 270 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 2.5 V ≤ VOUT < 3.3 V 5
Dropout voltage VDO 161 225 mV IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 3.3 V ≤ VOUT ≤ 5.5 V 5
Undervoltage lockout rising VUVLO 1.21 1.33 1.47 V VIN rising 5
Undervoltage lockout falling VUVLO 1.17 1.29 1.42 V VIN falling 5
Enable pin high voltage VEN(HI) 1 V 5
Enable pin low voltage VEN(LO) 0.3 V 5
Feedback voltage VFB 0.55 V TJ = 25°C 4
Feedback pin current IFB 0.01 0.1 µA 5
Short-circuit current limit ISC 770 mA VIN = VOUT(NOM) + 1.0 V, VOUT = 0 V 5
Output noise voltage Vn 53 µVRMS BW = 10 Hz to 100 kHz, VOUT = 0.9 V 5
Undervoltage lockout hysteresis VUVLO, HYST 40 mV VIN hysteresis 5
Startup time tSTR 500 µs From EN low-to-high transition to VOUT = VOUT(NOM) x 95% 5
Enable pin current IEN 10 nA VIN = VEN = 6.0 V 5
Pulldown resistance RPULLDOWN 95 Ω VIN = 6.0 V 5
Thermal shutdown (shutdown temperature) TSD 170 °C Shutdown, temperature increasing 5
Thermal shutdown (reset temperature) TSD 155 °C Reset, temperature decreasing 5
Junction-to-ambient thermal resistance RθJA 80.3 °C/W DRV (WSON) package 4
Junction-to-case (top) thermal resistance RθJC(top) 98.7 °C/W DRV (WSON) package 4
Junction-to-board thermal resistance RθJB 44.8 °C/W DRV (WSON) package 4
Junction-to-top characterization parameter ψJT 6.1 °C/W DRV (WSON) package 4
Junction-to-board characterization parameter ψJB 45 °C/W DRV (WSON) package 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 20.8 °C/W DRV (WSON) package 4

CAD (KiCad official)

  • Symbol: TLV75901PDRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv75901pdrvr-etched.step / tlv75901pdrvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv75901pdrvr.step / tlv75901pdrvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 151ebd99092e9aa9, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF