Generated by kicad-footprint-generator · KiCad file format 20260206
TLV75901PDRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TLV75901PDRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin that requires a capacitor from OUT to ground for stability, using the nominal recommended value or a larger ceramic capacitor, placed as close to the device as possible. |
| 2 | FB | input | Feedback input to the control loop error amplifier that sets the output voltage, with an adjustable output range of 0.55 V to 5.5 V. |
| 3 | GND | power_in | Ground pin. |
| 4 | EN | input | Enable pin: drive EN above VEN(HI) to turn on the regulator and below VEN(LO) to put the LDO into shutdown, with an enable voltage range of 0 V to 6.0 V. |
| 5 | DNC | unconnected | Do not connect. |
| 6 | IN | power_in | Input pin with an input voltage range of 1.5 V to 6.0 V, which requires the recommended value or larger ceramic capacitor from IN to ground placed close to the device. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VIN | -0.3 | 6.5 | V | 3 | ||
| Enable voltage | VEN | -0.3 | 6.5 | V | 3 | ||
| Output voltage | VOUT | -0.3 | V | Max is VIN + 0.3 V or 6.0 V, whichever is smaller | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage | VIN | 1.5 | 6 | V | 4 | ||
| Output voltage | VOUT | 0.55 | 5.5 | V | 4 | ||
| Output current | IOUT | 0 | 1 | A | 4 | ||
| Input capacitor | CIN | 1 | μF | 4 | |||
| Output capacitor | COUT | 1 | 220 | μF | 4 | ||
| Enable voltage | VEN | 0 | 6 | V | 4 | ||
| Enable toggle frequency | fEN | 10 | kHz | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Output accuracy | -0.7 | 0.7 | % | TJ = 25°C | 4 | ||
| Output accuracy | -1 | 1 | % | -40°C ≤ TJ ≤ +85°C | 4 | ||
| Output accuracy | -1.5 | 1.5 | % | -40°C ≤ TJ ≤ +125°C | 4 | ||
| Line regulation | 2 | 7.5 | mV | VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V | 4 | ||
| Ground current | IGND | 10 | 25 | µA | IOUT = 0 mA, TJ = 25°C | 4 | |
| Ground current | IGND | 35 | µA | IOUT = 0 mA, -40°C ≤ TJ ≤ +125°C | 4 | ||
| Shutdown current | ISHDN | 0.1 | 1 | µA | VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V | 4 | |
| Output current limit | ICL | 1.22 | 1.44 | 1.83 | A | VIN = VOUT(NOM) + 1.0 V, VOUT = VOUT(NOM) - 0.2 V, VOUT < 1.5 V | 5 |
| Dropout voltage | VDO | 896 | 1050 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.65 V ≤ VOUT < 0.8 V | 5 | |
| Dropout voltage | VDO | 765 | 920 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.8 V ≤ VOUT < 0.9 V | 5 | |
| Dropout voltage | VDO | 700 | 850 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.9 V ≤ VOUT < 1.0 V | 5 | |
| Dropout voltage | VDO | 600 | 750 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.0 V ≤ VOUT < 1.2 V | 5 | |
| Dropout voltage | VDO | 464 | 585 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.2 V ≤ VOUT < 1.5 V | 5 | |
| Dropout voltage | VDO | 332 | 440 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.5 V ≤ VOUT < 1.8 V | 5 | |
| Dropout voltage | VDO | 264 | 360 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.8 V ≤ VOUT < 2.5 V | 5 | |
| Dropout voltage | VDO | 193 | 270 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 2.5 V ≤ VOUT < 3.3 V | 5 | |
| Dropout voltage | VDO | 161 | 225 | mV | IOUT = 1 A, -40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 3.3 V ≤ VOUT ≤ 5.5 V | 5 | |
| Undervoltage lockout rising | VUVLO | 1.21 | 1.33 | 1.47 | V | VIN rising | 5 |
| Undervoltage lockout falling | VUVLO | 1.17 | 1.29 | 1.42 | V | VIN falling | 5 |
| Enable pin high voltage | VEN(HI) | 1 | V | 5 | |||
| Enable pin low voltage | VEN(LO) | 0.3 | V | 5 | |||
| Feedback voltage | VFB | 0.55 | V | TJ = 25°C | 4 | ||
| Feedback pin current | IFB | 0.01 | 0.1 | µA | 5 | ||
| Short-circuit current limit | ISC | 770 | mA | VIN = VOUT(NOM) + 1.0 V, VOUT = 0 V | 5 | ||
| Output noise voltage | Vn | 53 | µVRMS | BW = 10 Hz to 100 kHz, VOUT = 0.9 V | 5 | ||
| Undervoltage lockout hysteresis | VUVLO, HYST | 40 | mV | VIN hysteresis | 5 | ||
| Startup time | tSTR | 500 | µs | From EN low-to-high transition to VOUT = VOUT(NOM) x 95% | 5 | ||
| Enable pin current | IEN | 10 | nA | VIN = VEN = 6.0 V | 5 | ||
| Pulldown resistance | RPULLDOWN | 95 | Ω | VIN = 6.0 V | 5 | ||
| Thermal shutdown (shutdown temperature) | TSD | 170 | °C | Shutdown, temperature increasing | 5 | ||
| Thermal shutdown (reset temperature) | TSD | 155 | °C | Reset, temperature decreasing | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 80.3 | °C/W | DRV (WSON) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 98.7 | °C/W | DRV (WSON) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 44.8 | °C/W | DRV (WSON) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 6.1 | °C/W | DRV (WSON) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 45 | °C/W | DRV (WSON) package | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 20.8 | °C/W | DRV (WSON) package | 4 |
CAD (KiCad official)
- Symbol:
TLV75901PDRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tlv75901pdrvr-etched.step/tlv75901pdrvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv75901pdrvr.step/tlv75901pdrvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
151ebd99092e9aa9, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).