TLV75801PDBVR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tlv75801pdbvr",
  "title": "TLV75801PDBVR",
  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "tlv75801pdbvr"
  ],
  "component": {
    "mpn": "TLV75801PDBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv75801p.pdf",
    "parts": {
      "symbol": "tlv75801pdbvr.kicad_sym",
      "footprint": "tlv75801pdbvr.kicad_mod",
      "model_3d": "tlv75801pdbvr-etched.glb",
      "model_3d_plain": "tlv75801pdbvr.glb",
      "model_3d_step": "tlv75801pdbvr-etched.step",
      "model_3d_step_plain": "tlv75801pdbvr.step",
      "lbr": "tlv75801pdbvr.lbr"
    },
    "distributor_links": {
      "digikey": "296-TLV75801PDBVRTR-ND",
      "lcsc": "C2877852"
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator supply input pin (1.5 V to 6.0 V). Place a ≥1-µF ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance ≈95 Ω at VIN = 6 V."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current ≈0.01 µA (max 0.1 µA)."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (≥1 µF nominal, 0.47 µF minimum derated) from OUT to GND for stability; place close to the device."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tlv75801p.pdf",
        "pages": 35,
        "sha256": "6f381a87d3e91ac0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "pin1": {
      "pad": "1",
      "at": [
        -1.1375,
        -0.95
      ],
      "corner": "top-left",
      "source": "silk-marker",
      "derived_from": "SOT-23-5@sha256:455a3f7c3e5eb5b8",
      "mark": "drawn"
    },
    "models_3d": [
      {
        "file": "tlv75801pdbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlv75801pdbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "954d785601b19bb3ded3b53f59d979ceffd29f0b8f30551d8dbdc4ac5a14cff1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOT-23-5",
      "Category": "PMIC",
      "Pins": "5"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlv75801pdbvr"
  ],
  "discovery_pitch": "TLV75801PDBVR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlv75801pdbvr.kicad_sym",
    "tlv75801pdbvr.kicad_mod",
    "tlv75801pdbvr.glb",
    "tlv75801pdbvr.step",
    "tlv75801pdbvr-etched.step",
    "tlv75801pdbvr.lbr",
    "docs/hero.png",
    "docs/tlv75801pdbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "TLV75801PDBVR",
      "kind": "packaging"
    },
    {
      "mpn": "TLV75801PDBVRDBVT",
      "kind": "packaging"
    },
    {
      "mpn": "TLV75801PDBVRDRVR",
      "kind": "packaging"
    },
    {
      "mpn": "TLV75801PDBVRDRVT",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T10:43:18.317Z"
}