component

TLV75801PDBVR

Public Made by Adom

by adom

Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmictlv75801pdbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlv75801pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json tlv75801pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 19h ago
README.md tlv75801pdbvr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago
tlv75801pdbvr-etched.fit.json tlv75801pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv75801pdbvr-etched.glb tlv75801pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv75801pdbvr-etched.step tlv75801pdbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 5d ago
tlv75801pdbvr.glb Publish 0.1.0 · Ray 1mo ago
tlv75801pdbvr.kicad_mod Publish 0.1.0 · Ray 1mo ago
tlv75801pdbvr.kicad_sym Publish 0.1.0 · Ray 1mo ago
tlv75801pdbvr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 5 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
tlv75801pdbvr.step Publish 0.1.0 · Ray 1mo ago

TLV75801PDBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TLV75801PDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Regulator supply input pin (1.5 V to 6.0 V). Place a ≥1-µF ceramic input capacitor from IN to GND as close to the device as possible for best transient response and low input impedance.
2 GND power_in Device ground reference.
3 EN input Enable pin. Drive EN greater than VEN(HI) (min 1.0 V) to turn the regulator on; drive EN below VEN(LO) (max 0.3 V) to place the LDO in shutdown. Absolute-max 6.5 V. Internal pull-down resistance ≈95 Ω at VIN = 6 V.
4 FB input Feedback input to the internal error amplifier. Connect an external resistor divider from OUT to FB to GND to set the output voltage; VFB = 0.55 V typical. Feedback pin current ≈0.01 µA (max 0.1 µA).
5 OUT power_out Regulated output pin (0.55 V to 5.5 V, up to 500 mA). Requires an output capacitor (≥1 µF nominal, 0.47 µF minimum derated) from OUT to GND for stability; place close to the device.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TLV75801PDBVR
  • TLV75801PDBVRDBVT
  • TLV75801PDBVRDRVR
  • TLV75801PDBVRDRVT

CAD (KiCad official)

  • Symbol: TLV75801PDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv75801pdbvr-etched.step / tlv75801pdbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv75801pdbvr.step / tlv75801pdbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tlv75801pdbvr.step 85 KB You want the bare part, or you mark your own boards.
tlv75801pdbvr-etched.step 2.1 MB You want the part with TLV75801PDBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 525 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 6f381a87d3e91ac0, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF