Generated by kicad-footprint-generator · KiCad file format 20260206
TLV70218DBVR-HXY
HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
TLV70218DBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives a maximum input voltage of 6.5 V and recommends a 10uF input capacitor between VIN and VSS. |
| 2 | GND | power_in | Ground pin (referred to as VSS in the application notes). |
| 3 | CE | input | ON/OFF control input; logic high is at least 1.5 V and logic low is at most 0.4 V at VIN=5.0 V, and a low level shuts down the output and pulls VOUT low through the fast-discharge path. |
| 4 | NC | unconnected | No connect pin. |
| 5 | VOUT | power_out | Regulated output pin, with a fixed output voltage from 0.9 V to 5.0 V in 100 mV steps and up to 300 mA output current, needing an output capacitor of at least 10uF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Vout≤2.5V, offset from Vout) | Vout | -0.05 | 0.05 | V | Vout≤2.5V, Vin=Vout+1V, 1.0mA≤Iout≤100mA, TA=25°C; printed as Vout-0.05 / Vout+0.05 | 3 | |
| Line Regulation | ΔVout1/(ΔVin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V, Iout=10mA | 3 | |
| Load Regulation | ΔVout | 15 | 40 | mV | Vin=4.3V, 1.0mA≤Iout≤100mA | 3 | |
| Supply Current | Iss | 10 | 15 | uA | 3 | ||
| Input Voltage | Vin | 6.5 | V | 3 | |||
| EN logic high voltage | VENH | 1.5 | V | VIN=5.0V | 3 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.0V | 3 | ||
| Supply Voltage (absolute maximum) | VIN | -0.3 | 8 | V | 2 | ||
| Storage Temperature Range | TSTG | -50 | 125 | °C | 2 | ||
| Operating Temperature | TA | -40 | 85 | °C | 2 | ||
| Thermal resistance | θJA | 260 | °C/W | SOT-23-5L | 2 | ||
| Power dissipation | PW | 0.4 | W | SOT-23-5L | 2 | ||
| Output Current | Iout | 300 | mA | Vin-Vout=1V | 3 | ||
| Dropout Voltage | VDROP | 0.11 | V | Iout=100mA | 3 | ||
| Output voltage Temperature Coefficient | ΔVout/(Ta·Vout) | 100 | ppm/°C | Iout=30mA, 0℃≤Ta≤70℃; printed ±100 | 3 | ||
| PSRR | PSRR | 75 | dB | F=100Hz, Vin=(VOUT+1)dc+1Vpp | 3 | ||
| PSRR | PSRR | 65 | dB | F=1000Hz, Vin=(VOUT+1)dc+1Vpp | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLV70218DBVR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv70218dbvr-hxy-etched.step/tlv70218dbvr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv70218dbvr-hxy.step/tlv70218dbvr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
d5ecf8f81f8e153d, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).