Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV70218DBVR-HXY

HXY MOSFET · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

TLV70218DBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin; the datasheet gives a maximum input voltage of 6.5 V and recommends a 10uF input capacitor between VIN and VSS.
2 GND power_in Ground pin (referred to as VSS in the application notes).
3 CE input ON/OFF control input; logic high is at least 1.5 V and logic low is at most 0.4 V at VIN=5.0 V, and a low level shuts down the output and pulls VOUT low through the fast-discharge path.
4 NC unconnected No connect pin.
5 VOUT power_out Regulated output pin, with a fixed output voltage from 0.9 V to 5.0 V in 100 mV steps and up to 300 mA output current, needing an output capacitor of at least 10uF.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOT-23-5L
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (Vout≤2.5V, offset from Vout) Vout -0.05 0.05 V Vout≤2.5V, Vin=Vout+1V, 1.0mA≤Iout≤100mA, TA=25°C; printed as Vout-0.05 / Vout+0.05 3
Line Regulation ΔVout1/(ΔVin·Vout) 0.05 0.2 %/V 4.3V≤Vin≤8V, Iout=10mA 3
Load Regulation ΔVout 15 40 mV Vin=4.3V, 1.0mA≤Iout≤100mA 3
Supply Current Iss 10 15 uA 3
Input Voltage Vin 6.5 V 3
EN logic high voltage VENH 1.5 V VIN=5.0V 3
EN logic low voltage VENL 0.4 V VIN=5.0V 3
Supply Voltage (absolute maximum) VIN -0.3 8 V 2
Storage Temperature Range TSTG -50 125 °C 2
Operating Temperature TA -40 85 °C 2
Thermal resistance θJA 260 °C/W SOT-23-5L 2
Power dissipation PW 0.4 W SOT-23-5L 2
Output Current Iout 300 mA Vin-Vout=1V 3
Dropout Voltage VDROP 0.11 V Iout=100mA 3
Output voltage Temperature Coefficient ΔVout/(Ta·Vout) 100 ppm/°C Iout=30mA, 0℃≤Ta≤70℃; printed ±100 3
PSRR PSRR 75 dB F=100Hz, Vin=(VOUT+1)dc+1Vpp 3
PSRR PSRR 65 dB F=1000Hz, Vin=(VOUT+1)dc+1Vpp 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLV70218DBVR-HXY
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv70218dbvr-hxy-etched.step / tlv70218dbvr-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv70218dbvr-hxy.step / tlv70218dbvr-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (6 pp, sha256 d5ecf8f81f8e153d, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF