main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlv62585pdrlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tlv62585pdrlr: viewers · Ray
package.json tlv62585pdrlr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tlv62585pdrlr: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray
README.md tlv62585pdrlr: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray
tlv62585pdrlr-etched.fit.json tlv62585pdrlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585pdrlr-etched.glb tlv62585pdrlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585pdrlr-etched.step tlv62585pdrlr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlv62585pdrlr.glb Publish 0.1.0 · Ray
tlv62585pdrlr.kicad_mod Publish 0.1.0 · Ray
tlv62585pdrlr.kicad_sym Publish 0.1.0 · Ray
tlv62585pdrlr.lbr Publish 0.1.0 · Ray
tlv62585pdrlr.step Publish 0.1.0 · Ray

TLV62585PDRLR

Texas Instruments · DC-DC Converters · SOT-563

TLV62585PDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin serving as power supply return and signal reference.
2 SW power_out Switch pin connected to internal FET switches and inductor terminal; connect the output filter inductor to this pin.
3 VIN power_in Power supply voltage pin accepting input voltage range of 2.5 V to 5.5 V.
4 EN input Device enable logic input with VIH ≥ 1.2 V and VIL ≤ 0.4 V; logic high enables operation, logic low forces shutdown at 0.7 µA typical; must not float.
5 FB input Feedback pin for internal control loop with 600 mV regulation setpoint; connect external resistive divider for output voltage programming.
6 PG output Power good open-drain output pin; output low when VOUT falls below 90% nominal, high-impedance when above 95% nominal; pull-up voltage maximum 5.5 V with sink current maximum 1 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage at pins VIN, EN, PG -0.3 6 V 4
Voltage at pin FB -0.3 3 V 4
Voltage at pin SW (DC) -0.3 V DC 4
Voltage at pin SW (AC) -3 9 V less than 10 ns, while switching 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input voltage range VIN 2.5 5.5 V 4
Output voltage range VOUT 0.6 V 4
Sink current at PG pin ISINK_PG 1 mA 4
Output current IOUT 0 3 A 4
Operating junction temperature TJ -40 125 °C 4
High-level input voltage (EN) VIH 1.2 V VIN = 2.5 V to 5.5 V 5
Low-level input voltage (EN) VIL 0.4 V VIN = 2.5 V to 5.5 V 5
Low-level output voltage (PG) VPG,OL 0.4 V Isink = 1 mA 5
Feedback regulation voltage VFB 594 600 606 mV PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, 0°C to 85°C 5
Feedback regulation voltage VFB 588 600 612 mV PWM mode, 2.5 V ≤ VIN ≤ 5.5 V, -40°C to 125°C 5
Junction-to-ambient thermal resistance RθJA 132.7 °C/W DRL (SOT) package 4
Junction-to-case (top) thermal resistance RθJC(top) 43.8 °C/W DRL (SOT) package 4
Junction-to-board thermal resistance RθJB 27.3 °C/W DRL (SOT) package 4
Junction-to-top characterization parameter ψJT 1.2 °C/W DRL (SOT) package 4
Junction-to-board characterization parameter ψJB 26.6 °C/W DRL (SOT) package 4

CAD (KiCad official)

  • Symbol: TLV62585PDRLR
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: tlv62585pdrlr-etched.step / tlv62585pdrlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62585pdrlr.step / tlv62585pdrlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 4972181b7a6a9bdc, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF