component
TLV62585PDRLR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV62585PDRLR
Texas Instruments · DC-DC Converters · SOT-563
TLV62585PDRLR from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin serving as power supply return and signal reference. |
| 2 | SW | power_out | Switch pin connected to internal FET switches and inductor terminal; connect the output filter inductor to this pin. |
| 3 | VIN | power_in | Power supply voltage pin accepting input voltage range of 2.5 V to 5.5 V. |
| 4 | EN | input | Device enable logic input with VIH ≥ 1.2 V and VIL ≤ 0.4 V; logic high enables operation, logic low forces shutdown at 0.7 µA typical; must not float. |
| 5 | FB | input | Feedback pin for internal control loop with 600 mV regulation setpoint; connect external resistive divider for output voltage programming. |
| 6 | PG | output | Power good open-drain output pin; output low when VOUT falls below 90% nominal, high-impedance when above 95% nominal; pull-up voltage maximum 5.5 V with sink current maximum 1 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TLV62585PDRLR - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
tlv62585pdrlr-etched.step/tlv62585pdrlr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62585pdrlr.step/tlv62585pdrlr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
4972181b7a6a9bdc, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).