main
History Download
Ray Initial commit: component/tlv62569pddct 367d52c

TLV62569PDDCT

Texas Instruments · DC-DC Converters · TSOT-23-6

TLV62569PDDCT from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device enable logic input that activates the device at logic high and turns it into shutdown at logic low, and must not be left floating.
2 GND power_in Ground reference pin.
3 SW power_out Power switching node connected to the internal FET switches where the inductor of the output filter should be connected.
4 VIN power_in Power supply voltage input.
5 PG output Power good open drain output pin for TLV62569P that requires a pull-up resistor not connected to any voltage higher than 5.5V, or may be left floating if not used.
6 FB input Feedback pin for the internal control loop that is connected to an external feedback divider.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: TLV62569PDDCT
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tlv62569pddct-etched.step / tlv62569pddct-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62569pddct.step / tlv62569pddct.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 b7e88a666f860762, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF