component
TLV62569PDDCT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV62569PDDCT
Texas Instruments · DC-DC Converters · TSOT-23-6
TLV62569PDDCT from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable logic input that activates the device at logic high and turns it into shutdown at logic low, and must not be left floating. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | SW | power_out | Power switching node connected to the internal FET switches where the inductor of the output filter should be connected. |
| 4 | VIN | power_in | Power supply voltage input. |
| 5 | PG | output | Power good open drain output pin for TLV62569P that requires a pull-up resistor not connected to any voltage higher than 5.5V, or may be left floating if not used. |
| 6 | FB | input | Feedback pin for the internal control loop that is connected to an external feedback divider. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TLV62569PDDCT - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tlv62569pddct-etched.step/tlv62569pddct-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62569pddct.step/tlv62569pddct.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
b7e88a666f860762, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).