# TLV62569APDRLT

**Texas Instruments** · DC-DC Converters · SOT-563-6

TLV62569APDRLT from Texas Instruments, in a SOT-563-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback pin for the internal control loop; connect this pin to an external feedback divider. |
| 2 | GND | power_in | Ground pin. |
| 3 | VIN | power_in | Power supply voltage input. |
| 4 | SW | output | Switch pin connected to the internal FET switches and inductor terminal; connect the inductor of the output filter to this pin. |
| 5 | EN | input | Device enable logic input; logic high enables the device, logic low disables the device and turns it into shutdown; do not leave floating. |
| 6 | PG | output | Power good open-drain output pin for TLV62569APDRL; the pull-up resistor should not be connected to any voltage higher than 5.5V; if not used, leave the pin floating. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |

## CAD (KiCad official)

- Symbol: `TLV62569APDRLT`
- Footprint: `Package_TO_SOT_SMD:SOT-563`
- 3D model: SOT-563-6 (KiCad packages3D, STEP)
- 3D model files: `tlv62569apdrlt-etched.step` / `tlv62569apdrlt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv62569apdrlt.step` / `tlv62569apdrlt.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv62568a) (23 pp, sha256 `60bb6fcb24b14fa4`, retrieved 2026-10-03, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tlv62569apdrlt-datasheet.pdf)