main
History Download
Ray tlv62130rgtt: specified limits as data (metadata.characteristics, 31 rows from the datasheet) b7e0a54

TLV62130RGTT

Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)

TLV62130RGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor.
2 SW output Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor.
3 SW output Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor.
4 PG output Open-drain power good output; high = VOUT ready, low = VOUT below nominal regulation; maximum sink current 2 mA at 0.3 V output low.
5 FB input Voltage feedback input for output regulation via resistive divider; regulated to 0.8 V nominal setpoint; maximum leakage 100 nA.
6 AGND power_in Analog ground reference; must be connected directly to exposed thermal pad and common ground plane.
7 FSW input Switching frequency select input; low ≈ 2.5 MHz, high ≈ 1.25 MHz typical operation; logic thresholds 0.3 V low, 0.9 V high.
8 DEF input Output voltage scaling input; low = nominal voltage, high = nominal + 5%; logic thresholds 0.3 V low, 0.9 V high; internal pull-down 400 kΩ.
9 SS/TR input Soft-start and tracking pin; external capacitor controls output voltage ramp time with 2.5 µA source current.
10 AVIN power_in Analog supply voltage input for control circuitry; connect to same source as PVIN; operating range 3 V to 17 V.
11 PVIN power_in Power supply voltage input for power stage; connect to same source as AVIN; operating range 3 V to 17 V.
12 PVIN power_in Power supply voltage input for power stage; connect to same source as AVIN; operating range 3 V to 17 V.
13 EN input Enable control input; high = enabled, low = disabled; logic thresholds 0.3 V low, 0.9 V high; internal pull-down 400 kΩ.
14 VOS input Output voltage sense input for control loop feedback; connect to VOUT at output capacitor with short, isolated trace.
15 PGND power_in Power ground reference; must be connected directly to exposed thermal pad and common ground plane.
16 PGND power_in Power ground reference; must be connected directly to exposed thermal pad and common ground plane.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (recommended) VIN 3 17 V 5
Input Voltage Range VIN 3 17 V 6
Operating Quiescent Current IQ 19 27 μA EN=High, IOUT = 0 mA, device not switching 6
Shutdown Current ISD 1.5 4 μA EN=Low 6
Undervoltage Lockout Threshold (falling input voltage) VUVLO 2.6 2.7 2.8 V Falling Input Voltage (PWM mode operation) 6
Input Leakage Current (EN, DEF, FSW) ILKG 0.01 1 μA EN = VIN or GND; DEF, FSW = VOUT or GND 6
Power Good Threshold Voltage Rising (%VOUT) VTH_PG 92 95 98 % 6
Power Good Threshold Voltage Falling (%VOUT) VTH_PG 87 90 94 % 6
Power Good Output Low VOL_PG 0.07 0.3 V IPG = -2 mA 6
Input Leakage Current (PG) ILKG_PG 1 400 nA VPG = 1.8 V 6
SS/TR Pin Source Current ISS/TR 2.3 2.5 2.7 μA 6
High-Side MOSFET Forward Current Limit ILIMF 3.6 4.2 A VIN = 12 V, TA = 25°C 6
Input Leakage Current (FB) ILKG_FB 1 100 nA VFB = 0.8 V 6
Output Voltage Range VOUT 0.9 5.5 V VIN ≥ VOUT 6
Initial Output Voltage Accuracy (FB voltage) VFB 780 800 820 mV PWM mode operation, VIN ≥ VOUT +1 V 6
Pin voltage AVIN, PVIN -0.3 20 V 5
Pin voltage EN, SS/TR (max printed as VIN+0.3) -0.3 V 5
Pin voltage SW DC (max printed as VIN+0.3) -0.3 V 5
Pin voltage SW AC, less than 10ns -2 24.5 V less than 10ns 5
Pin voltage DEF, FSW, FB, PG, VOS -0.3 7 V 5
Power Good sink current PG 10 mA 5
Operating junction temperature TJ -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
Operating free air temperature TA -40 85 °C 5
Operating junction temperature TJ -40 125 °C 5
Junction-to-ambient thermal resistance (RGT 16 pins) RθJA 45 °C/W 5
Junction-to-case (top) thermal resistance (RGT 16 pins) RθJC(top) 53.6 °C/W 5
Junction-to-board thermal resistance (RGT 16 pins) RθJB 17.4 °C/W 5
Junction-to-top characterization parameter (RGT 16 pins) ψJT 1.1 °C/W 5
Junction-to-board characterization parameter (RGT 16 pins) ψJB 17.4 °C/W 5
Junction-to-case (bottom) thermal resistance (RGT 16 pins) RθJC(bot) 4.5 °C/W 5

CAD (KiCad official)

  • Symbol: TLV62130RGTT
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tlv62130rgtt-etched.step / tlv62130rgtt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62130rgtt.step / tlv62130rgtt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 0065382c4a9061fe, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF