# TLV6001RIDBVT

**Texas Instruments** · Operational Amplifier · SOT-23-5

TLV6001RIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, typically within 5 mV of either supply rail for resistive loads up to 100 kΩ, and continuous short-circuit to ground is permitted per the absolute maximum table. |
| 2 | V+ | power_in | Positive supply (highest potential), rated 1.8 V to 5.5 V (±0.9 V to ±2.75 V) with an absolute maximum of 7 V. |
| 3 | +IN | input | Non-inverting input whose common-mode range extends from (V-) - 0.2 V to (V+) + 0.2 V, and input currents beyond the rails must be limited to 10 mA. |
| 4 | -IN | input | Inverting input sharing the same rail-to-rail common-mode range of (V-) - 0.2 V to (V+) + 0.2 V. |
| 5 | V- | power_in | Negative supply (lowest potential), which forms the lower rail of the 1.8 V to 5.5 V operating supply. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (rated) | VS | 1.8 |  | 5.5 | V | Printed as 1.8 (±0.9) to 5.5 (±2.75) V | 9 |
| Common-mode voltage range (rail-to-rail input, no phase reversal) | VCM | -0.2 |  | 0.2 | V | Printed as (V-)-0.2 V minimum and (V+)+0.2 V maximum; the ±0.2 V offsets are referenced to the supply rails | 9 |
| Input offset voltage | VOS |  | 0.75 | 4.5 | mV |  | 9 |
| Common-mode rejection ratio | CMRR | 60 | 76 |  | dB | VCM = –0.2V 至 5.7V | 9 |
| Open-loop voltage gain | AOL | 90 | 110 |  |  | 0.3V < VO < (V+) – 0.3V，RL = 2kΩ | 9 |
| Output voltage swing from supply rail | VO |  | 75 | 100 | mV | RL = 2kΩ | 9 |
| Output voltage swing from supply rail | VO |  |  | 5 | mV | RL = 100kΩ | 9 |
| Quiescent current per amplifier | IQ |  | 75 | 100 | µA | IO = 0mA，VS = 5.0V | 9 |
| Input offset voltage drift | dVOS/dT |  | 2 |  | μV/°C | TA = –40°C 至 125°C | 9 |
| Power-supply rejection ratio | PSRR |  | 86 |  | dB |  | 9 |
| Input bias current | IB |  | 1 |  | pA | TA = 25°C | 9 |
| Input offset current | IOS |  | 1 |  | pA |  | 9 |
| Phase margin |  |  | 65 |  | 度 | VS=5.0V，G=+1 | 9 |
| Short-circuit current | ISC |  | 15 |  | mA |  | 9 |
| Open-loop output impedance | RO |  | 2300 |  | Ω |  | 9 |
| Gain-bandwidth product | GBW |  | 1 |  | MHz |  | 9 |
| Slew rate | SR |  | 0.5 |  | V/µs |  | 9 |
| Settling time | tS |  | 5 |  | μs | 到 0.1%，VS=5.0V，2V 阶跃，G=+1 | 9 |
| Input voltage noise (peak-to-peak) |  |  | 6 |  | μVPP | f=0.1Hz 至 10Hz | 9 |
| Input voltage noise density | en |  | 28 |  | nV/√Hz | f = 1kHz | 9 |
| Input current noise density | in |  | 5 |  | fA/√Hz | f=1kHz | 9 |
| Turn-on time |  |  | 10 |  | µs | VS=0V 至 5V，达到 90% IQ水平 | 9 |
| Junction-to-ambient thermal resistance (DBV SOT-23) | RθJA |  | 228.5 |  | °C/W | DBV (SOT-23), 5-pin | 8 |
| Junction-to-case (top) thermal resistance (DBV SOT-23) | RθJC(top) |  | 99.1 |  | °C/W | DBV (SOT-23), 5-pin | 8 |
| Junction-to-board thermal resistance (DBV SOT-23) | RθJB |  | 54.6 |  | °C/W | DBV (SOT-23), 5-pin | 8 |
| Junction-to-top characterization parameter (DBV SOT-23) | ψJT |  | 7.7 |  | °C/W | DBV (SOT-23), 5-pin | 8 |
| Junction-to-board characterization parameter (DBV SOT-23) | ψJB |  | 53.8 |  | °C/W | DBV (SOT-23), 5-pin | 8 |

## CAD (KiCad official)

- Symbol: `TLV6001RIDBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tlv6001ridbvt-etched.step` / `tlv6001ridbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv6001ridbvt.step` / `tlv6001ridbvt.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv6001) (44 pp, sha256 `6af123f60b8e1837`, retrieved 2026-10-09, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tlv6001ridbvt-datasheet.pdf)