component
TLV6001RIDBVT
Public Made by Adomby adom
Texas Instruments Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 19d ago |
| viewers | 19d ago |
| package.json | 19d ago |
| page.json | 14d ago |
| README.md | 14d ago |
| tlv6001ridbvt-etched.glb | 19d ago |
| tlv6001ridbvt-etched.step | 19d ago |
| tlv6001ridbvt-hero.glb | 19d ago |
| tlv6001ridbvt-hero.overlay.json | 19d ago |
| tlv6001ridbvt.glb | 19d ago |
| tlv6001ridbvt.kicad_mod | 19d ago |
| tlv6001ridbvt.kicad_sym | 19d ago |
| tlv6001ridbvt.lbr | 19d ago |
| tlv6001ridbvt.step | 19d ago |
TLV6001RIDBVT
Texas Instruments · Operational Amplifier · SOT-23-5
TLV6001RIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, typically within 5 mV of either supply rail for resistive loads up to 100 kΩ, and continuous short-circuit to ground is permitted per the absolute maximum table. |
| 2 | V+ | power_in | Positive supply (highest potential), rated 1.8 V to 5.5 V (±0.9 V to ±2.75 V) with an absolute maximum of 7 V. |
| 3 | +IN | input | Non-inverting input whose common-mode range extends from (V-) - 0.2 V to (V+) + 0.2 V, and input currents beyond the rails must be limited to 10 mA. |
| 4 | -IN | input | Inverting input sharing the same rail-to-rail common-mode range of (V-) - 0.2 V to (V+) + 0.2 V. |
| 5 | V- | power_in | Negative supply (lowest potential), which forms the lower rail of the 1.8 V to 5.5 V operating supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (rated) | VS | 1.8 | 5.5 | V | Printed as 1.8 (±0.9) to 5.5 (±2.75) V | 9 | |
| Common-mode voltage range (rail-to-rail input, no phase reversal) | VCM | -0.2 | 0.2 | V | Printed as (V-)-0.2 V minimum and (V+)+0.2 V maximum; the ±0.2 V offsets are referenced to the supply rails | 9 | |
| Input offset voltage | VOS | 0.75 | 4.5 | mV | 9 | ||
| Common-mode rejection ratio | CMRR | 60 | 76 | dB | VCM = –0.2V 至 5.7V | 9 | |
| Open-loop voltage gain | AOL | 90 | 110 | 0.3V < VO < (V+) – 0.3V，RL = 2kΩ | 9 | ||
| Output voltage swing from supply rail | VO | 75 | 100 | mV | RL = 2kΩ | 9 | |
| Output voltage swing from supply rail | VO | 5 | mV | RL = 100kΩ | 9 | ||
| Quiescent current per amplifier | IQ | 75 | 100 | µA | IO = 0mA，VS = 5.0V | 9 | |
| Input offset voltage drift | dVOS/dT | 2 | μV/°C | TA = –40°C 至 125°C | 9 | ||
| Power-supply rejection ratio | PSRR | 86 | dB | 9 | |||
| Input bias current | IB | 1 | pA | TA = 25°C | 9 | ||
| Input offset current | IOS | 1 | pA | 9 | |||
| Phase margin | 65 | 度 | VS=5.0V，G=+1 | 9 | |||
| Short-circuit current | ISC | 15 | mA | 9 | |||
| Open-loop output impedance | RO | 2300 | Ω | 9 | |||
| Gain-bandwidth product | GBW | 1 | MHz | 9 | |||
| Slew rate | SR | 0.5 | V/µs | 9 | |||
| Settling time | tS | 5 | μs | 到 0.1%，VS=5.0V，2V 阶跃，G=+1 | 9 | ||
| Input voltage noise (peak-to-peak) | 6 | μVPP | f=0.1Hz 至 10Hz | 9 | |||
| Input voltage noise density | en | 28 | nV/√Hz | f = 1kHz | 9 | ||
| Input current noise density | in | 5 | fA/√Hz | f=1kHz | 9 | ||
| Turn-on time | 10 | µs | VS=0V 至 5V，达到 90% IQ水平 | 9 | |||
| Junction-to-ambient thermal resistance (DBV SOT-23) | RθJA | 228.5 | °C/W | DBV (SOT-23), 5-pin | 8 | ||
| Junction-to-case (top) thermal resistance (DBV SOT-23) | RθJC(top) | 99.1 | °C/W | DBV (SOT-23), 5-pin | 8 | ||
| Junction-to-board thermal resistance (DBV SOT-23) | RθJB | 54.6 | °C/W | DBV (SOT-23), 5-pin | 8 | ||
| Junction-to-top characterization parameter (DBV SOT-23) | ψJT | 7.7 | °C/W | DBV (SOT-23), 5-pin | 8 | ||
| Junction-to-board characterization parameter (DBV SOT-23) | ψJB | 53.8 | °C/W | DBV (SOT-23), 5-pin | 8 |
CAD (KiCad official)
- Symbol:
TLV6001RIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv6001ridbvt-etched.step/tlv6001ridbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv6001ridbvt.step/tlv6001ridbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
6af123f60b8e1837, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).