Generated by kicad-footprint-generator · KiCad file format 20260206
TLV6001IDCKR-HXY
HXY MOSFET · Operational Amplifier · SOT-353
TLV6001IDCKR-HXY from HXY MOSFET, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; input range extends to V- - 0.1 V to V+ + 0.1 V, clamped by diodes to the rails with current limited to 10 mA. |
| 2 | V- | power_in | Negative (lowest) power supply pin, ground in single-supply use; supply range Vs = (V+) - (V-) is 1.5 V to 5.5 V (6 V absolute maximum), with a 0.1 uF capacitor recommended across the supply pins. |
| 3 | -IN | input | Negative (inverting) input; input range extends to V- - 0.1 V to V+ + 0.1 V, clamped by diodes to the rails with current limited to 10 mA. |
| 4 | OUT | output | Rail-to-rail output swinging within 5 mV of the rail at RL=100kΩ, with short-circuit current of 45 mA source and 70 mA sink. |
| 5 | V+ | power_in | Positive (highest) power supply pin; supply range Vs = (V+) - (V-) is 1.5 V to 5.5 V (6 V absolute maximum), with a 0.1 uF capacitor recommended across the supply pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-353 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 6 | V | 3 | ||||
| Signal Input Terminals Current | -10 | 10 | mA | 3 | |||
| Signal Output Terminals Current | -200 | 200 | mA | 3 | |||
| Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | -40 | 150 | °C | 3 | |||
| ESD Human-Body Model | V(ESD) | -2000 | 2000 | V | HBM | 3 | |
| ESD Charged-Device Model | V(ESD) | -500 | 500 | V | CDM | 3 | |
| ESD Machine Model | V(ESD) | 100 | V | Machine Model | 3 | ||
| Supply Voltage, single-supply | Vs | 1.5 | 5.5 | V | Vs = (V+) - (V-), single-supply | 3 | |
| Supply Voltage, dual-supply | Vs | 0.75 | 2.75 | V | Vs = (V+) - (V-), dual-supply, printed ±0.75 to ±2.75 | 3 | |
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | TA = 25°C, VS = +5V, VCM=VOUT=VS/2 | 4 |
| Input Offset Voltage Average Drift | dVOS/dT | 1.8 | µV/°C | TA = -55°C to 125°C | 4 | ||
| Input Bias Current | IB | 5 | pA | 4 | |||
| Input Offset Current | IOS | 1 | pA | 4 | |||
| Input Voltage Noise | VN | 20 | µV PP | f=0.1Hz to 10Hz | 4 | ||
| Input Voltage Noise Density | en | 65 | nV/√Hz | f=1kHz | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | dB | VCM=0.1V to 4V | 4 | |
| Gain-Bandwidth Product | GBW | 1 | MHz | 4 | |||
| Slew Rate | SR | 1 | V/us | G = +1, VIN=2V Step | 4 | ||
| Settling Time to 0.1% | tS | 2.5 | us | G = +1, VIN=2V Step | 4 | ||
| Open-Loop Voltage Gain | AV | 80 | 100 | dB | VOUT=0.1V to 4.9V, RL=100kΩ | 4 | |
| Output Swing from Rail | VOUT-SWING | 5 | mV | RL=100kΩ | 4 | ||
| Output Short-Circuit Current, source | ISC | 45 | mA | Source current | 4 | ||
| Output Short-Circuit Current, sink | ISC | 70 | mA | Sink current | 4 | ||
| Capacitive Load Drive | CL | 1000 | pF | G = +1, VIN=0.2V Step | 4 | ||
| Power-Supply Rejection Ratio | PSRR | 80 | 90 | dB | VS=1.5V to 5.5V | 5 | |
| Operating Voltage Range | VS | 1.5 | 5.5 | V | 5 | ||
| Quiescent Current/Amplifier | IQ | 28 | 40 | uA | IO=0A | 5 |
CAD (KiCad official)
- Symbol:
TLV6001IDCKR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
tlv6001idckr-hxy-etched.step/tlv6001idckr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv6001idckr-hxy.step/tlv6001idckr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (11 pp, sha256
85827c9469a2ceca, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).