Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV6001IDCKR-HXY

HXY MOSFET · Operational Amplifier · SOT-353

TLV6001IDCKR-HXY from HXY MOSFET, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Positive (noninverting) input; input range extends to V- - 0.1 V to V+ + 0.1 V, clamped by diodes to the rails with current limited to 10 mA.
2 V- power_in Negative (lowest) power supply pin, ground in single-supply use; supply range Vs = (V+) - (V-) is 1.5 V to 5.5 V (6 V absolute maximum), with a 0.1 uF capacitor recommended across the supply pins.
3 -IN input Negative (inverting) input; input range extends to V- - 0.1 V to V+ + 0.1 V, clamped by diodes to the rails with current limited to 10 mA.
4 OUT output Rail-to-rail output swinging within 5 mV of the rail at RL=100kΩ, with short-circuit current of 45 mA source and 70 mA sink.
5 V+ power_in Positive (highest) power supply pin; supply range Vs = (V+) - (V-) is 1.5 V to 5.5 V (6 V absolute maximum), with a 0.1 uF capacitor recommended across the supply pins.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOT-353
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage 6 V 3
Signal Input Terminals Current -10 10 mA 3
Signal Output Terminals Current -200 200 mA 3
Operating Temperature Range -55 125 °C 3
Storage Temperature Range -65 150 °C 3
Junction Temperature -40 150 °C 3
ESD Human-Body Model V(ESD) -2000 2000 V HBM 3
ESD Charged-Device Model V(ESD) -500 500 V CDM 3
ESD Machine Model V(ESD) 100 V Machine Model 3
Supply Voltage, single-supply Vs 1.5 5.5 V Vs = (V+) - (V-), single-supply 3
Supply Voltage, dual-supply Vs 0.75 2.75 V Vs = (V+) - (V-), dual-supply, printed ±0.75 to ±2.75 3
Input Offset Voltage VOS -3 1 3 mV TA = 25°C, VS = +5V, VCM=VOUT=VS/2 4
Input Offset Voltage Average Drift dVOS/dT 1.8 µV/°C TA = -55°C to 125°C 4
Input Bias Current IB 5 pA 4
Input Offset Current IOS 1 pA 4
Input Voltage Noise VN 20 µV PP f=0.1Hz to 10Hz 4
Input Voltage Noise Density en 65 nV/√Hz f=1kHz 4
Common-Mode Rejection Ratio CMRR 70 80 dB VCM=0.1V to 4V 4
Gain-Bandwidth Product GBW 1 MHz 4
Slew Rate SR 1 V/us G = +1, VIN=2V Step 4
Settling Time to 0.1% tS 2.5 us G = +1, VIN=2V Step 4
Open-Loop Voltage Gain AV 80 100 dB VOUT=0.1V to 4.9V, RL=100kΩ 4
Output Swing from Rail VOUT-SWING 5 mV RL=100kΩ 4
Output Short-Circuit Current, source ISC 45 mA Source current 4
Output Short-Circuit Current, sink ISC 70 mA Sink current 4
Capacitive Load Drive CL 1000 pF G = +1, VIN=0.2V Step 4
Power-Supply Rejection Ratio PSRR 80 90 dB VS=1.5V to 5.5V 5
Operating Voltage Range VS 1.5 5.5 V 5
Quiescent Current/Amplifier IQ 28 40 uA IO=0A 5

CAD (KiCad official)

  • Symbol: TLV6001IDCKR-HXY
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SOT-353 (KiCad packages3D, STEP)
  • 3D model files: tlv6001idckr-hxy-etched.step / tlv6001idckr-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv6001idckr-hxy.step / tlv6001idckr-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (11 pp, sha256 85827c9469a2ceca, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF