component
TLV6001IDBVR-HXY
Public Made by Adomby adom
HXY MOSFET Operational Amplifier, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 9d ago |
| viewers | 9d ago |
| package.json | 9d ago |
| page.json | 9d ago |
| README.md | 9d ago |
| tlv6001idbvr-hxy-etched.glb | 9d ago |
| tlv6001idbvr-hxy-etched.step | 9d ago |
| tlv6001idbvr-hxy-hero.glb | 9d ago |
| tlv6001idbvr-hxy-hero.overlay.json | 9d ago |
| tlv6001idbvr-hxy.glb | 9d ago |
| tlv6001idbvr-hxy.kicad_mod | 9d ago |
| tlv6001idbvr-hxy.kicad_sym | 9d ago |
| tlv6001idbvr-hxy.lbr | 9d ago |
| tlv6001idbvr-hxy.step | 9d ago |
TLV6001IDBVR-HXY
HXY MOSFET · Operational Amplifier · SOT-23-5L
TLV6001IDBVR-HXY from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) input; the datasheet states the input common-mode range includes ground and runs from VS-0.1 V to VS+0.1 V. |
| 2 | V- | power_in | Printed description reads "Positive (highest) power supply", which conflicts with the V- name; the datasheet defines Vs = (V+) - (V-), so V- is the lower supply rail and the printed description should be verified. |
| 3 | -IN | input | Negative (inverting) input; the datasheet states the input common-mode range includes ground and runs from VS-0.1 V to VS+0.1 V. |
| 4 | OUT | output | Output; the datasheet states rail-to-rail output swing into heavy loads, with output swing from rail of 5 mV typical at RL=100kΩ. |
| 5 | V+ | power_in | Printed description reads "Negative (lowest) power supply", which conflicts with the V+ name; the datasheet defines Vs = (V+) - (V-) with supply range 1.5 V to 5.5 V single-supply, so V+ is the higher supply rail and the printed description should be verified. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 6 | V | 3 | ||||
| Signal Input Terminals Current (2) | -10 | 10 | mA | 3 | |||
| Signal Output Terminals Current (3) | -200 | 200 | mA | 3 | |||
| Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | -40 | 150 | °C | 3 | |||
| Electrostatic discharge Human-Body Model (HBM) | V(ESD) | -2000 | 2000 | V | 3 | ||
| Electrostatic discharge Charged-Device Model (CDM) | V(ESD) | -500 | 500 | V | 3 | ||
| Electrostatic discharge Machine Model | V(ESD) | 100 | V | 3 | |||
| Supply voltage, single-supply | Vs | 1.5 | 5.5 | V | 3 | ||
| Supply voltage, dual-supply (printed ±0.75 / ±2.75) | Vs | 0.75 | 2.75 | V | 3 | ||
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | 4 | |
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | dB | VCM=0.1V to 4V | 4 | |
| Open-Loop Voltage Gain | AV | 80 | 100 | dB | VOUT=0.1V to 4.9V, RL=100kΩ | 4 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 90 | dB | VS=1.5V to 5.5V | 5 | |
| Operating Voltage Range | VS | 1.5 | 5.5 | V | 5 | ||
| Quiescent Current/Amplifier | IQ | 28 | 40 | uA | IO=0A | 5 | |
| Input Offset Voltage Average Drift | dVOS/dT | 1.8 | µV/°C | TA = -55°C to 125°C | 4 | ||
| Input Bias Current | IB | 5 | pA | 4 | |||
| Input Offset Current | IOS | 1 | pA | 4 | |||
| Input Voltage Noise | VN | 20 | µV PP | f=0.1Hz to 10Hz | 4 | ||
| Input Voltage Noise Density | en | 65 | nV/√Hz | f=1kHz | 4 | ||
| Gain-Bandwidth Product | GBW | 1 | MHz | 4 | |||
| Slew Rate | SR | 1 | V/us | G = +1, VIN=2V Step | 4 | ||
| Settling Time to 0.1% | tS | 2.5 | us | G = +1, VIN=2V Step | 4 | ||
| Capacitive Load Drive | CL | 1000 | pF | G = +1, VIN=0.2V Step | 4 |
CAD (KiCad official)
- Symbol:
TLV6001IDBVR-HXY - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
tlv6001idbvr-hxy-etched.step/tlv6001idbvr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv6001idbvr-hxy.step/tlv6001idbvr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (11 pp, sha256
14630237894a2b5a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).