main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv5618aip: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv5618aip-etched.glb Publish 0.1.0 · Ray
tlv5618aip-etched.step tlv5618aip: factory component page (tier=mfr) · Ray
tlv5618aip-hero.glb tlv5618aip: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv5618aip-hero.overlay.json Publish 0.1.0 · Ray
tlv5618aip.glb Publish 0.1.0 · Ray
tlv5618aip.kicad_mod Publish 0.1.0 · Ray
tlv5618aip.kicad_sym Publish 0.1.0 · Ray
tlv5618aip.lbr Publish 0.1.0 · Ray
tlv5618aip.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TLV5618AIP

Texas Instruments · Digital To Analog Converters (DAC) · PDIP-8

TLV5618AIP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIN input Digital serial data input; the 16-bit word (4 control bits and 12 data bits) is shifted in MSB first on the falling edges of SCLK.
2 SCLK input Digital serial clock input; the maximum serial clock frequency is 20 MHz.
3 CS input Chip select, digital input active low, used to enable and disable the inputs; CS must be low before the first negative SCLK edge (5 ns minimum at VDD = 5 V, 10 ns at VDD = 3 V).
4 OUTA output DAC A analog voltage output, buffered by an x2 rail-to-rail output buffer with an output range of 0 to VDD-0.4 V at RL = 10 kΩ.
5 AGND power_in Ground reference pin for the device.
6 REF input Analog reference voltage input with a range of 0 to VDD-1.5 V; a reference at or above (VDD-0.4 V)/2 clips the transfer function because of the x2 output buffer.
7 OUTB output DAC B analog voltage output, buffered by an x2 rail-to-rail output buffer.
8 VDD power_in Positive power supply, specified for single-supply operation from 2.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Data Acquisition
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (VDD = 5 V) VDD 4.5 5 5.5 V VDD = 5 V 3
Supply voltage VDD (VDD = 3 V) VDD 2.7 3 3.3 V VDD = 3 V 3
Power on reset 0.55 2 V 3
High-level digital input voltage VIH VIH 2 V VDD = 2.7 V 3
High-level digital input voltage VIH VIH 2.4 V VDD = 5.5 V 3
Low-level digital input voltage VIL VIL 0.6 V VDD = 2.7 V 3
Low-level digital input voltage VIL VIL 1 V VDD = 5.5 V 3
Load resistance RL RL 2 kΩ 3
Load capacitance CL CL 100 pF 3
Clock frequency f(CLK) 20 MHz 3
Operating free-air temperature TA (TLV5618AI) TA -40 85 °C TLV5618AI 3
Supply voltage (VDD to AGND) VDD 7 V 3
Reference input voltage range -0.3 V 3
Digital input voltage range -0.3 V 3
Operating free-air temperature range TA (TLV5618AI) TA -40 85 °C TLV5618AI 3
Storage temperature range Tstg -65 150 °C 3
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 3
Power supply current, fast mode (VDD = 4.5 V to 5.5 V) IDD 1.8 2.5 mA VDD = 4.5 V to 5.5 V; no load; all inputs = AGND or VDD 4
Power supply current, slow mode (VDD = 4.5 V to 5.5 V) IDD 0.8 1 mA VDD = 4.5 V to 5.5 V; no load; all inputs = AGND or VDD 4
Power supply current, fast mode (VDD = 2.7 V to 3.3 V) IDD 1.6 2.2 mA VDD = 2.7 V to 3.3 V; no load; all inputs = AGND or VDD 4
Power supply current, slow mode (VDD = 2.7 V to 3.3 V) IDD 0.6 0.9 mA VDD = 2.7 V to 3.3 V; no load; all inputs = AGND or VDD; DAC latch = all ones 4
Integral nonlinearity INL INL -4 2 4 LSB See Note 4 4
Differential nonlinearity DNL DNL -1 0.5 1 LSB See Note 5 4
Zero-scale error EZS -12 12 mV See Note 6 4
Gain error (C&I suffixes, VDD = 4.5 V to 5.5 V) EG -0.29 0.29 % full scale VDD = 4.5 V, 5.5 V; See Note 8 4
Gain error (C&I suffixes, VDD = 2.7 V to 3.3 V) EG -0.6 0.6 % full scale VDD = 2.7 V, 3.3 V; See Note 8 4
Output voltage range VO 0 V RL = 10 kΩ 4
Output load regulation accuracy -0.29 0.29 % FS VO = 4.096 V, 2.048 V, RL = 2 kΩ to 10 kΩ 4
Input voltage range (reference) VI 0 V 5
Output settling time, full scale (Fast mode) ts(FS) 1 3 µs RL = 10 kΩ, CL = 100 pF; See Note 11 5
Output settling time, full scale (Slow mode) ts(FS) 3 10 µs RL = 10 kΩ, CL = 100 pF; See Note 11 5
Setup time, CS low before first negative SCLK edge (VDD = 5 V) tsu(CS-CK) 5 ns C and I suffixes, VDD = 5 V 6
Setup time, CS low before first negative SCLK edge (VDD = 3 V) tsu(CS-CK) 10 ns C and I suffixes, VDD = 3 V 6
Setup time, 16th negative SCLK edge before CS rising edge tsu(C16-CS) 10 ns 6
SCLK pulse width high tw(H) 25 ns 6
SCLK pulse width low tw(L) 25 ns 6
Setup time, data ready before SCLK falling edge (VDD = 5 V) tsu(D) 5 ns C and I suffixes, VDD = 5 V 6
Setup time, data ready before SCLK falling edge (VDD = 3 V) tsu(D) 10 ns C and I suffixes, VDD = 3 V 6
Hold time, data held valid after SCLK falling edge (VDD = 5 V) th(D) 5 ns C and I suffixes, VDD = 5 V 6
Hold time, data held valid after SCLK falling edge (VDD = 3 V) th(D) 10 ns C and I suffixes, VDD = 3 V 6
Hold time, CS high between cycles (VDD = 5 V) th(CSH) 25 ns VDD = 5 V 6
Hold time, CS high between cycles (VDD = 3 V) th(CSH) 50 ns VDD = 3 V 6
Power supply rejection ratio, zero scale PSRR -65 dB Zero scale; See Note 2 4
Power supply rejection ratio, full scale PSRR -65 dB Full scale; See Note 3 4
Power down supply current 1 µA 4
Zero-scale error temperature coefficient EZS (TC) 3 ppm/°C See Note 7 4
Gain-error temperature coefficient EG (TC) 1 ppm/°C See Note 9 4
Reference input bandwidth (Fast mode) 1.3 MHz REF = 0.2 Vpp + 1.024 V dc 5
Reference input bandwidth (Slow mode) 525 kHz REF = 0.2 Vpp + 1.024 V dc 5
Reference feedthrough -80 dB REF = 1 Vpp at 1 kHz + 1.024 V dc; See Note 10 5
High-level digital input current IIH 1 µA VI = VDD 5
Low-level digital input current IIL -1 µA VI = 0 V 5
Output settling time, code to code (Fast mode) ts(CC) 1 µs RL = 10 kΩ, CL = 100 pF; See Note 12 5
Output settling time, code to code (Slow mode) ts(CC) 2 µs RL = 10 kΩ, CL = 100 pF; See Note 12 5
Slew rate (Fast mode) SR 3 V/µs RL = 10 kΩ, CL = 100 pF; See Note 13 5
Slew rate (Slow mode) SR 0.5 V/µs RL = 10 kΩ, CL = 100 pF; See Note 13 5
Glitch energy 5 nV-s DIN = 0 to 1, FCLK = 100 kHz, CS = VDD 5
Signal-to-noise + distortion SINAD SINAD 68 dB fs = 102 kSPS, fout = 1 kHz, RL = 10 kΩ 5
Total harmonic distortion THD THD -68 dB fs = 102 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF 5
Input resistance (reference) RI 10 MΩ 5

CAD (KiCad official)

  • Symbol: TLV5618AIP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: tlv5618aip-etched.step / tlv5618aip-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv5618aip.step / tlv5618aip.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 6e934ec099fbeda6, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF