3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV5618AIP
Texas Instruments · Digital To Analog Converters (DAC) · PDIP-8
TLV5618AIP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIN | input | Digital serial data input; the 16-bit word (4 control bits and 12 data bits) is shifted in MSB first on the falling edges of SCLK. |
| 2 | SCLK | input | Digital serial clock input; the maximum serial clock frequency is 20 MHz. |
| 3 | CS | input | Chip select, digital input active low, used to enable and disable the inputs; CS must be low before the first negative SCLK edge (5 ns minimum at VDD = 5 V, 10 ns at VDD = 3 V). |
| 4 | OUTA | output | DAC A analog voltage output, buffered by an x2 rail-to-rail output buffer with an output range of 0 to VDD-0.4 V at RL = 10 kΩ. |
| 5 | AGND | power_in | Ground reference pin for the device. |
| 6 | REF | input | Analog reference voltage input with a range of 0 to VDD-1.5 V; a reference at or above (VDD-0.4 V)/2 clips the transfer function because of the x2 output buffer. |
| 7 | OUTB | output | DAC B analog voltage output, buffered by an x2 rail-to-rail output buffer. |
| 8 | VDD | power_in | Positive power supply, specified for single-supply operation from 2.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (VDD = 5 V) | VDD | 4.5 | 5 | 5.5 | V | VDD = 5 V | 3 |
| Supply voltage VDD (VDD = 3 V) | VDD | 2.7 | 3 | 3.3 | V | VDD = 3 V | 3 |
| Power on reset | 0.55 | 2 | V | 3 | |||
| High-level digital input voltage VIH | VIH | 2 | V | VDD = 2.7 V | 3 | ||
| High-level digital input voltage VIH | VIH | 2.4 | V | VDD = 5.5 V | 3 | ||
| Low-level digital input voltage VIL | VIL | 0.6 | V | VDD = 2.7 V | 3 | ||
| Low-level digital input voltage VIL | VIL | 1 | V | VDD = 5.5 V | 3 | ||
| Load resistance RL | RL | 2 | kΩ | 3 | |||
| Load capacitance CL | CL | 100 | pF | 3 | |||
| Clock frequency | f(CLK) | 20 | MHz | 3 | |||
| Operating free-air temperature TA (TLV5618AI) | TA | -40 | 85 | °C | TLV5618AI | 3 | |
| Supply voltage (VDD to AGND) | VDD | 7 | V | 3 | |||
| Reference input voltage range | -0.3 | V | 3 | ||||
| Digital input voltage range | -0.3 | V | 3 | ||||
| Operating free-air temperature range TA (TLV5618AI) | TA | -40 | 85 | °C | TLV5618AI | 3 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Power supply current, fast mode (VDD = 4.5 V to 5.5 V) | IDD | 1.8 | 2.5 | mA | VDD = 4.5 V to 5.5 V; no load; all inputs = AGND or VDD | 4 | |
| Power supply current, slow mode (VDD = 4.5 V to 5.5 V) | IDD | 0.8 | 1 | mA | VDD = 4.5 V to 5.5 V; no load; all inputs = AGND or VDD | 4 | |
| Power supply current, fast mode (VDD = 2.7 V to 3.3 V) | IDD | 1.6 | 2.2 | mA | VDD = 2.7 V to 3.3 V; no load; all inputs = AGND or VDD | 4 | |
| Power supply current, slow mode (VDD = 2.7 V to 3.3 V) | IDD | 0.6 | 0.9 | mA | VDD = 2.7 V to 3.3 V; no load; all inputs = AGND or VDD; DAC latch = all ones | 4 | |
| Integral nonlinearity INL | INL | -4 | 2 | 4 | LSB | See Note 4 | 4 |
| Differential nonlinearity DNL | DNL | -1 | 0.5 | 1 | LSB | See Note 5 | 4 |
| Zero-scale error | EZS | -12 | 12 | mV | See Note 6 | 4 | |
| Gain error (C&I suffixes, VDD = 4.5 V to 5.5 V) | EG | -0.29 | 0.29 | % full scale | VDD = 4.5 V, 5.5 V; See Note 8 | 4 | |
| Gain error (C&I suffixes, VDD = 2.7 V to 3.3 V) | EG | -0.6 | 0.6 | % full scale | VDD = 2.7 V, 3.3 V; See Note 8 | 4 | |
| Output voltage range | VO | 0 | V | RL = 10 kΩ | 4 | ||
| Output load regulation accuracy | -0.29 | 0.29 | % FS | VO = 4.096 V, 2.048 V, RL = 2 kΩ to 10 kΩ | 4 | ||
| Input voltage range (reference) | VI | 0 | V | 5 | |||
| Output settling time, full scale (Fast mode) | ts(FS) | 1 | 3 | µs | RL = 10 kΩ, CL = 100 pF; See Note 11 | 5 | |
| Output settling time, full scale (Slow mode) | ts(FS) | 3 | 10 | µs | RL = 10 kΩ, CL = 100 pF; See Note 11 | 5 | |
| Setup time, CS low before first negative SCLK edge (VDD = 5 V) | tsu(CS-CK) | 5 | ns | C and I suffixes, VDD = 5 V | 6 | ||
| Setup time, CS low before first negative SCLK edge (VDD = 3 V) | tsu(CS-CK) | 10 | ns | C and I suffixes, VDD = 3 V | 6 | ||
| Setup time, 16th negative SCLK edge before CS rising edge | tsu(C16-CS) | 10 | ns | 6 | |||
| SCLK pulse width high | tw(H) | 25 | ns | 6 | |||
| SCLK pulse width low | tw(L) | 25 | ns | 6 | |||
| Setup time, data ready before SCLK falling edge (VDD = 5 V) | tsu(D) | 5 | ns | C and I suffixes, VDD = 5 V | 6 | ||
| Setup time, data ready before SCLK falling edge (VDD = 3 V) | tsu(D) | 10 | ns | C and I suffixes, VDD = 3 V | 6 | ||
| Hold time, data held valid after SCLK falling edge (VDD = 5 V) | th(D) | 5 | ns | C and I suffixes, VDD = 5 V | 6 | ||
| Hold time, data held valid after SCLK falling edge (VDD = 3 V) | th(D) | 10 | ns | C and I suffixes, VDD = 3 V | 6 | ||
| Hold time, CS high between cycles (VDD = 5 V) | th(CSH) | 25 | ns | VDD = 5 V | 6 | ||
| Hold time, CS high between cycles (VDD = 3 V) | th(CSH) | 50 | ns | VDD = 3 V | 6 | ||
| Power supply rejection ratio, zero scale | PSRR | -65 | dB | Zero scale; See Note 2 | 4 | ||
| Power supply rejection ratio, full scale | PSRR | -65 | dB | Full scale; See Note 3 | 4 | ||
| Power down supply current | 1 | µA | 4 | ||||
| Zero-scale error temperature coefficient | EZS (TC) | 3 | ppm/°C | See Note 7 | 4 | ||
| Gain-error temperature coefficient | EG (TC) | 1 | ppm/°C | See Note 9 | 4 | ||
| Reference input bandwidth (Fast mode) | 1.3 | MHz | REF = 0.2 Vpp + 1.024 V dc | 5 | |||
| Reference input bandwidth (Slow mode) | 525 | kHz | REF = 0.2 Vpp + 1.024 V dc | 5 | |||
| Reference feedthrough | -80 | dB | REF = 1 Vpp at 1 kHz + 1.024 V dc; See Note 10 | 5 | |||
| High-level digital input current | IIH | 1 | µA | VI = VDD | 5 | ||
| Low-level digital input current | IIL | -1 | µA | VI = 0 V | 5 | ||
| Output settling time, code to code (Fast mode) | ts(CC) | 1 | µs | RL = 10 kΩ, CL = 100 pF; See Note 12 | 5 | ||
| Output settling time, code to code (Slow mode) | ts(CC) | 2 | µs | RL = 10 kΩ, CL = 100 pF; See Note 12 | 5 | ||
| Slew rate (Fast mode) | SR | 3 | V/µs | RL = 10 kΩ, CL = 100 pF; See Note 13 | 5 | ||
| Slew rate (Slow mode) | SR | 0.5 | V/µs | RL = 10 kΩ, CL = 100 pF; See Note 13 | 5 | ||
| Glitch energy | 5 | nV-s | DIN = 0 to 1, FCLK = 100 kHz, CS = VDD | 5 | |||
| Signal-to-noise + distortion SINAD | SINAD | 68 | dB | fs = 102 kSPS, fout = 1 kHz, RL = 10 kΩ | 5 | ||
| Total harmonic distortion THD | THD | -68 | dB | fs = 102 kSPS, fout = 1 kHz, RL = 10 kΩ, CL = 100 pF | 5 | ||
| Input resistance (reference) | RI | 10 | MΩ | 5 |
CAD (KiCad official)
- Symbol:
TLV5618AIP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tlv5618aip-etched.step/tlv5618aip-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv5618aip.step/tlv5618aip.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
6e934ec099fbeda6, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).