main
Ray
Publish 0.1.0
6b36e88
TLV316QDBVRQ1
Texas Instruments · Operational Amplifier · SOT-23-5
TLV316QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the class AB output stage drives loads of 10 kΩ or less connected to any point between V+ and ground. |
| 2 | V- | power_in | Negative (lowest) supply or ground for single-supply operation; total supply (V+) − (V−) is specified from 1.8 V to 5.5 V. |
| 3 | +IN | input | Noninverting input; the input common-mode range extends 200 mV beyond the supply rails for supply voltages above 2.5 V. |
| 4 | -IN | input | Inverting input; input pins are diode-clamped to the supply rails and signals swinging more than 0.5 V beyond the rails must be limited to 10 mA or less. |
| 5 | V+ | power_in | Positive (highest) supply; the device operates from 1.8 V to 5.5 V with a 7 V absolute maximum supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 0.75 | 3 | mV | VS = 5 V | 9 |
| Input offset voltage over temperature | VOS | -4.5 | 4.5 | mV | VS = 5 V, TA = -40°C to 125°C | 9 | |
| Power-supply rejection ratio | PSRR | -175 | 30 | 175 | µV/V | VS = 1.8 V, 5.5 V, VCM = (V-) | 9 |
| Common-mode rejection ratio | CMRR | 72 | 90 | dB | VS = 5.5 V, (V-), 0.2 V < VCM < (V+), 1.4 V, TA = -40°C to 125°C | 9 | |
| Common-mode rejection ratio over full common-mode range | CMRR | 75 | dB | VS = 5.5 V, VCM = -0.2 V to 5.7 V, TA = -40°C to 125°C | 9 | ||
| Open-loop voltage gain | AOL | 100 | 104 | dB | VS = 5.5 V, (V-) + 0.05 V < VO < (V+), 0.05 V, RL = 10 kΩ | 9 | |
| Open-loop voltage gain | AOL | 104 | dB | VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 9 | ||
| Voltage output swing from supply rails | VO | 35 | mV | VS = 1.8 V to 5.5 V, RL = 10 kΩ | 9 | ||
| Voltage output swing from supply rails | VO | 125 | mV | VS = 1.8 to 5.5 V, RL = 2 kΩ | 9 | ||
| Short-circuit current | ISC | -50 | 50 | mA | VS = 5 V | 9 | |
| Quiescent current per amplifier | IQ | 400 | 575 | µA | VS = 5 V, IO = 0 mA, TA = -40°C to 125°C | 9 | |
| Specified voltage range | VS | 1.8 | 5.5 | V | 9 | ||
| Specified temperature range | TA | -40 | 125 | °C | 9 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 9 | ||
| Supply voltage | VS | 1.8 | 5.5 | V | over operating free-air temperature range | 7 | |
| Specified temperature range | -40 | 125 | °C | over operating free-air temperature range | 7 | ||
| Supply voltage | 7 | V | over operating free-air temperature (unless otherwise noted) | 7 | |||
| Input current | -10 | 10 | mA | signal input pins | 7 | ||
| Specified temperature | TA | -40 | 125 | °C | over operating free-air temperature (unless otherwise noted) | 7 | |
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Junction-to-ambient thermal resistance (DBV, SOT-23, 5 pins) | RθJA | 221.7 | °C/W | 8 | |||
| Junction-to-case (top) thermal resistance (DBV, SOT-23, 5 pins) | RθJC(top) | 144.7 | °C/W | 8 | |||
| Junction-to-board thermal resistance (DBV, SOT-23, 5 pins) | RθJB | 49.7 | °C/W | 8 | |||
| Junction-to-top characterization parameter (DBV, SOT-23, 5 pins) | ψJT | 26.1 | °C/W | 8 | |||
| Junction-to-board characterization parameter (DBV, SOT-23, 5 pins) | ψJB | 49 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
TLV316QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv316qdbvrq1-etched.step/tlv316qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv316qdbvrq1.step/tlv316qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
6e5949da4c30252c, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLV316QDBVRQ1
**Texas Instruments** · Operational Amplifier · SOT-23-5
TLV316QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; the class AB output stage drives loads of 10 kΩ or less connected to any point between V+ and ground. |
| 2 | V- | power_in | Negative (lowest) supply or ground for single-supply operation; total supply (V+) − (V−) is specified from 1.8 V to 5.5 V. |
| 3 | +IN | input | Noninverting input; the input common-mode range extends 200 mV beyond the supply rails for supply voltages above 2.5 V. |
| 4 | -IN | input | Inverting input; input pins are diode-clamped to the supply rails and signals swinging more than 0.5 V beyond the rails must be limited to 10 mA or less. |
| 5 | V+ | power_in | Positive (highest) supply; the device operates from 1.8 V to 5.5 V with a 7 V absolute maximum supply voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 0.75 | 3 | mV | VS = 5 V | 9 |
| Input offset voltage over temperature | VOS | -4.5 | | 4.5 | mV | VS = 5 V, TA = -40°C to 125°C | 9 |
| Power-supply rejection ratio | PSRR | -175 | 30 | 175 | µV/V | VS = 1.8 V, 5.5 V, VCM = (V-) | 9 |
| Common-mode rejection ratio | CMRR | 72 | 90 | | dB | VS = 5.5 V, (V-), 0.2 V < VCM < (V+), 1.4 V, TA = -40°C to 125°C | 9 |
| Common-mode rejection ratio over full common-mode range | CMRR | 75 | | | dB | VS = 5.5 V, VCM = -0.2 V to 5.7 V, TA = -40°C to 125°C | 9 |
| Open-loop voltage gain | AOL | 100 | 104 | | dB | VS = 5.5 V, (V-) + 0.05 V < VO < (V+), 0.05 V, RL = 10 kΩ | 9 |
| Open-loop voltage gain | AOL | 104 | | | dB | VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 9 |
| Voltage output swing from supply rails | VO | | | 35 | mV | VS = 1.8 V to 5.5 V, RL = 10 kΩ | 9 |
| Voltage output swing from supply rails | VO | | | 125 | mV | VS = 1.8 to 5.5 V, RL = 2 kΩ | 9 |
| Short-circuit current | ISC | -50 | | 50 | mA | VS = 5 V | 9 |
| Quiescent current per amplifier | IQ | | 400 | 575 | µA | VS = 5 V, IO = 0 mA, TA = -40°C to 125°C | 9 |
| Specified voltage range | VS | 1.8 | | 5.5 | V | | 9 |
| Specified temperature range | TA | -40 | | 125 | °C | | 9 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 9 |
| Supply voltage | VS | 1.8 | | 5.5 | V | over operating free-air temperature range | 7 |
| Specified temperature range | | -40 | | 125 | °C | over operating free-air temperature range | 7 |
| Supply voltage | | | | 7 | V | over operating free-air temperature (unless otherwise noted) | 7 |
| Input current | | -10 | | 10 | mA | signal input pins | 7 |
| Specified temperature | TA | -40 | | 125 | °C | over operating free-air temperature (unless otherwise noted) | 7 |
| Junction temperature | TJ | | | 150 | °C | | 7 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 7 |
| Junction-to-ambient thermal resistance (DBV, SOT-23, 5 pins) | RθJA | | 221.7 | | °C/W | | 8 |
| Junction-to-case (top) thermal resistance (DBV, SOT-23, 5 pins) | RθJC(top) | | 144.7 | | °C/W | | 8 |
| Junction-to-board thermal resistance (DBV, SOT-23, 5 pins) | RθJB | | 49.7 | | °C/W | | 8 |
| Junction-to-top characterization parameter (DBV, SOT-23, 5 pins) | ψJT | | 26.1 | | °C/W | | 8 |
| Junction-to-board characterization parameter (DBV, SOT-23, 5 pins) | ψJB | | 49 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `TLV316QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tlv316qdbvrq1-etched.step` / `tlv316qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv316qdbvrq1.step` / `tlv316qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv316-q1.pdf) (35 pp, sha256 `6e5949da4c30252c`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlv316qdbvrq1-datasheet.pdf)