main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv316qdbvrq1: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv316qdbvrq1-etched.glb Publish 0.1.0 · Ray
tlv316qdbvrq1-etched.step tlv316qdbvrq1: factory component page (tier=mfr) · Ray
tlv316qdbvrq1-hero.glb tlv316qdbvrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv316qdbvrq1-hero.overlay.json Publish 0.1.0 · Ray
tlv316qdbvrq1.glb Publish 0.1.0 · Ray
tlv316qdbvrq1.kicad_mod Publish 0.1.0 · Ray
tlv316qdbvrq1.kicad_sym Publish 0.1.0 · Ray
tlv316qdbvrq1.lbr Publish 0.1.0 · Ray
tlv316qdbvrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TLV316QDBVRQ1

Texas Instruments · Operational Amplifier · SOT-23-5

TLV316QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; the class AB output stage drives loads of 10 kΩ or less connected to any point between V+ and ground.
2 V- power_in Negative (lowest) supply or ground for single-supply operation; total supply (V+) − (V−) is specified from 1.8 V to 5.5 V.
3 +IN input Noninverting input; the input common-mode range extends 200 mV beyond the supply rails for supply voltages above 2.5 V.
4 -IN input Inverting input; input pins are diode-clamped to the supply rails and signals swinging more than 0.5 V beyond the rails must be limited to 10 mA or less.
5 V+ power_in Positive (highest) supply; the device operates from 1.8 V to 5.5 V with a 7 V absolute maximum supply voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -3 0.75 3 mV VS = 5 V 9
Input offset voltage over temperature VOS -4.5 4.5 mV VS = 5 V, TA = -40°C to 125°C 9
Power-supply rejection ratio PSRR -175 30 175 µV/V VS = 1.8 V, 5.5 V, VCM = (V-) 9
Common-mode rejection ratio CMRR 72 90 dB VS = 5.5 V, (V-), 0.2 V < VCM < (V+), 1.4 V, TA = -40°C to 125°C 9
Common-mode rejection ratio over full common-mode range CMRR 75 dB VS = 5.5 V, VCM = -0.2 V to 5.7 V, TA = -40°C to 125°C 9
Open-loop voltage gain AOL 100 104 dB VS = 5.5 V, (V-) + 0.05 V < VO < (V+), 0.05 V, RL = 10 kΩ 9
Open-loop voltage gain AOL 104 dB VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ 9
Voltage output swing from supply rails VO 35 mV VS = 1.8 V to 5.5 V, RL = 10 kΩ 9
Voltage output swing from supply rails VO 125 mV VS = 1.8 to 5.5 V, RL = 2 kΩ 9
Short-circuit current ISC -50 50 mA VS = 5 V 9
Quiescent current per amplifier IQ 400 575 µA VS = 5 V, IO = 0 mA, TA = -40°C to 125°C 9
Specified voltage range VS 1.8 5.5 V 9
Specified temperature range TA -40 125 °C 9
Storage temperature range Tstg -65 150 °C 9
Supply voltage VS 1.8 5.5 V over operating free-air temperature range 7
Specified temperature range -40 125 °C over operating free-air temperature range 7
Supply voltage 7 V over operating free-air temperature (unless otherwise noted) 7
Input current -10 10 mA signal input pins 7
Specified temperature TA -40 125 °C over operating free-air temperature (unless otherwise noted) 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
Junction-to-ambient thermal resistance (DBV, SOT-23, 5 pins) RθJA 221.7 °C/W 8
Junction-to-case (top) thermal resistance (DBV, SOT-23, 5 pins) RθJC(top) 144.7 °C/W 8
Junction-to-board thermal resistance (DBV, SOT-23, 5 pins) RθJB 49.7 °C/W 8
Junction-to-top characterization parameter (DBV, SOT-23, 5 pins) ψJT 26.1 °C/W 8
Junction-to-board characterization parameter (DBV, SOT-23, 5 pins) ψJB 49 °C/W 8

CAD (KiCad official)

  • Symbol: TLV316QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv316qdbvrq1-etched.step / tlv316qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv316qdbvrq1.step / tlv316qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 6e5949da4c30252c, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF