main
Ray Publish 0.1.0 2271c77

TLV2172QDGKRQ1

Texas Instruments · Operational Amplifier · VSSOP-8

TLV2172QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of channel A, which swings rail-to-rail and can drive capacitive loads up to 300 pF with an isolation resistor.
2 -IN A input Inverting input of channel A; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation.
3 +IN A input Noninverting input of channel A; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation.
4 V- power_in Negative (lowest) power supply; the device is specified for 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply.
5 +IN B input Noninverting input of channel B; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation.
6 -IN B input Inverting input of channel B; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation.
7 OUT B output Output of channel B, which swings rail-to-rail and can drive capacitive loads up to 300 pF with an isolation resistor.
8 V+ power_in Positive (highest) power supply; the device is specified for 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply, with absolute maximum supply voltage of 40 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS 0.5 1.7 mV TA = 25°C 5
Input offset voltage VOS 2 mV TA = -40°C to +125°C 5
Power-supply rejection ratio PSRR 100 120 dB VS = 4 V to 36 V, TA = -40°C to +125°C 5
Common-mode rejection ratio CMRR 94 116 dB VS = ±18 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +125°C 5
Open-loop voltage gain AOL 97 115 dB (V-) + 0.35 V < VO < (V+), 0.35 V, TA = -40°C to +125°C 5
Open-loop voltage gain AOL 107 dB (V-) + 0.5 V < VO < (V+), 0.5 V, RL = 2 kΩ, TA = -40°C to +125°C 5
Voltage output swing from rail VO 70 mV VS = ±18 V, RL = 10 kΩ, TA = 25°C 5
Voltage output swing from rail VO 95 mV VS = ±18 V, RL = 10 kΩ, TA = -40°C to +125°C 5
Voltage output swing from rail VO 330 400 mV VS = ±18 V, RL = 2 kΩ, TA = 25°C 5
Voltage output swing from rail VO 470 530 mV VS = ±18 V, RL = 2 kΩ, TA = -40°C to +125°C 5
Short-circuit current ISC -75 75 mA 5
Specified voltage range VS 4.5 36 V 5
Quiescent current per amplifier IQ 1.6 2.3 mA IO = 0 A, TA = -40°C to +125°C 5
Supply voltage, V+ to V- -20 20 V 4
Single-supply voltage 40 V 4
Differential input voltage -0.5 0.5 V 4
Signal input pin current -10 10 mA 4
Operating free-air temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage, single-supply 4.5 36 V Single-supply, (V+), (V-) 4
Supply voltage, dual-supply 2.25 18 V Dual-supply, printed as ±2.25 V to ±18 V per rail 4
Specified temperature -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 158 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 48.6 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board thermal resistance RθJB 78.7 °C/W DGK (VSSOP) 8-pin package 4

CAD (KiCad official)

  • Symbol: TLV2172QDGKRQ1
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv2172qdgkrq1-etched.step / tlv2172qdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv2172qdgkrq1.step / tlv2172qdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 19eec9ebdb4db82b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF