3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2172QDGKRQ1
Texas Instruments · Operational Amplifier · VSSOP-8
TLV2172QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of channel A, which swings rail-to-rail and can drive capacitive loads up to 300 pF with an isolation resistor. |
| 2 | -IN A | input | Inverting input of channel A; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation. |
| 3 | +IN A | input | Noninverting input of channel A; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation. |
| 4 | V- | power_in | Negative (lowest) power supply; the device is specified for 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply. |
| 5 | +IN B | input | Noninverting input of channel B; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation. |
| 6 | -IN B | input | Inverting input of channel B; the input common-mode range extends 100 mV below V- and within 2 V of V+ for normal operation. |
| 7 | OUT B | output | Output of channel B, which swings rail-to-rail and can drive capacitive loads up to 300 pF with an isolation resistor. |
| 8 | V+ | power_in | Positive (highest) power supply; the device is specified for 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply, with absolute maximum supply voltage of 40 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 0.5 | 1.7 | mV | TA = 25°C | 5 | |
| Input offset voltage | VOS | 2 | mV | TA = -40°C to +125°C | 5 | ||
| Power-supply rejection ratio | PSRR | 100 | 120 | dB | VS = 4 V to 36 V, TA = -40°C to +125°C | 5 | |
| Common-mode rejection ratio | CMRR | 94 | 116 | dB | VS = ±18 V, (V-), 0.1 V < VCM < (V+), 2 V, TA = -40°C to +125°C | 5 | |
| Open-loop voltage gain | AOL | 97 | 115 | dB | (V-) + 0.35 V < VO < (V+), 0.35 V, TA = -40°C to +125°C | 5 | |
| Open-loop voltage gain | AOL | 107 | dB | (V-) + 0.5 V < VO < (V+), 0.5 V, RL = 2 kΩ, TA = -40°C to +125°C | 5 | ||
| Voltage output swing from rail | VO | 70 | mV | VS = ±18 V, RL = 10 kΩ, TA = 25°C | 5 | ||
| Voltage output swing from rail | VO | 95 | mV | VS = ±18 V, RL = 10 kΩ, TA = -40°C to +125°C | 5 | ||
| Voltage output swing from rail | VO | 330 | 400 | mV | VS = ±18 V, RL = 2 kΩ, TA = 25°C | 5 | |
| Voltage output swing from rail | VO | 470 | 530 | mV | VS = ±18 V, RL = 2 kΩ, TA = -40°C to +125°C | 5 | |
| Short-circuit current | ISC | -75 | 75 | mA | 5 | ||
| Specified voltage range | VS | 4.5 | 36 | V | 5 | ||
| Quiescent current per amplifier | IQ | 1.6 | 2.3 | mA | IO = 0 A, TA = -40°C to +125°C | 5 | |
| Supply voltage, V+ to V- | -20 | 20 | V | 4 | |||
| Single-supply voltage | 40 | V | 4 | ||||
| Differential input voltage | -0.5 | 0.5 | V | 4 | |||
| Signal input pin current | -10 | 10 | mA | 4 | |||
| Operating free-air temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, single-supply | 4.5 | 36 | V | Single-supply, (V+), (V-) | 4 | ||
| Supply voltage, dual-supply | 2.25 | 18 | V | Dual-supply, printed as ±2.25 V to ±18 V per rail | 4 | ||
| Specified temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 158 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 48.6 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 78.7 | °C/W | DGK (VSSOP) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
TLV2172QDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv2172qdgkrq1-etched.step/tlv2172qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2172qdgkrq1.step/tlv2172qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
19eec9ebdb4db82b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).