component
TLV1854
Public Made by Adomby adom
Texas Instruments , TSSOP-14 (PW). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
tlv1854: CAD wording names the Adom_Gen land, not KiCad official
efe480b
TLV1854
Texas Instruments · IC · TSSOP-14 (PW)
TLV1854 from Texas Instruments, in a TSSOP-14 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output pin of comparator 1. |
| 2 | IN1- | input | Negative (inverting) input pin of comparator 1. |
| 3 | IN1+ | input | Positive (non-inverting) input pin of comparator 1. |
| 4 | V+ | power_in | Positive supply voltage pin. |
| 5 | IN2+ | input | Positive (non-inverting) input pin of comparator 2. |
| 6 | IN2- | input | Negative (inverting) input pin of comparator 2. |
| 7 | OUT2 | output | Output pin of comparator 2. |
| 8 | OUT3 | output | Output pin of comparator 3. |
| 9 | IN3- | input | Negative (inverting) input pin of comparator 3. |
| 10 | IN3+ | input | Positive (non-inverting) input pin of comparator 3. |
| 11 | V- | power_in | Negative supply voltage pin. |
| 12 | IN4+ | input | Positive (non-inverting) input pin of comparator 4. |
| 13 | IN4- | input | Negative (inverting) input pin of comparator 4. |
| 14 | OUT4 | output | Output pin of comparator 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 (PW) |
| Category | |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3.6 | 0.25 | 3.6 | mV | 8 | |
| Input offset voltage over temperature | VOS | -4.4 | 4.4 | mV | TA = -40°C to +125°C | 8 | |
| Input hysteresis voltage | VHYS | 1 | 2.8 | 5 | mV | 8 | |
| Common-mode voltage range from (V-) | VCM-Range | 0 | 40 | V | VS = 1.8V to 40V, TA = -40°C to +125°C | 8 | |
| Quiescent current per comparator (output high), push-pull output option | IQ | 520 | 750 | nA | Push Pull Output Option | 8 | |
| Quiescent current per comparator (output high), push-pull output option over temperature | IQ | 1000 | nA | Push Pull Output Option, TA = -40°C to 125°C | 8 | ||
| Input bias current | IB | 1 | 250 | pA | 8 | ||
| Input bias current over temperature | IB | 1500 | pA | TA = -40°C to +125°C | 8 | ||
| Input offset current | IOS | 0.1 | 100 | pA | 8 | ||
| Input offset current over temperature | IOS | 1000 | pA | TA = -40°C to +125°C | 8 | ||
| Voltage swing from (V-) | VOL | 20 | 60 | mV | ISINK = 50µA | 8 | |
| Voltage swing from (V-) over temperature | VOL | 100 | mV | ISINK = 50µA, TA = -40°C to +125°C | 8 | ||
| Voltage swing from (V+), push-pull only | VOH | 25 | 60 | mV | ISOURCE = 50µA | 8 | |
| Voltage swing from (V+), push-pull only, over temperature | VOH | 100 | mV | ISOURCE = 50µA, TA = -40°C to +125°C | 8 | ||
| Short-circuit current, sinking | IOL | 7 | mA | Sinking, TA = -40°C to +125°C | 8 | ||
| Short-circuit current, sourcing (push-pull only) | IOH | 5 | mA | Sourcing (for Push-Pull only), TA = -40°C to +125°C | 9 | ||
| Voltage swing from (V-), low load | VOL | 1 | mV | ISINK = 2µA | 8 | ||
| Voltage swing from (V+), low load, push-pull only | VOH | 1 | mV | ISOURCE = 2µA | 8 | ||
| Power-on reset threshold voltage | VPOR | 1.5 | V | During power on, VS must exceed VPOR for tON before the output will reflect the input. | 8 | ||
| Propagation delay time, high-to-low | TPD-HL | 45 | µs | VOD = 10mV, CL = 25pF, VSTEP = 100mV | 9 | ||
| Propagation delay time, high-to-low | TPD-HL | 16 | µs | VOD = 50mV, CL = 25pF, VSTEP = 100mV | 9 | ||
| Propagation delay time, high-to-low | TPD-HL | 13 | µs | VOD = 100mV, CL = 25pF, VSTEP = 200mV | 9 | ||
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | 34 | µs | VOD = 10mV, CL = 10pF, VSTEP = 100mV | 9 | ||
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | 16 | µs | VOD = 50mV, CL = 10pF, VSTEP = 100mV | 9 | ||
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | 14 | µs | VOD = 100mV, CL = 10pF, VSTEP = 200mV | 9 | ||
| Output rise time, 20% to 80%, push-pull output | TRISE | 0.2 | µs | CL = 25pF | 9 | ||
| Output fall time, 80% to 20% | TFALL | 0.2 | µs | CL = 25pF | 9 | ||
| Power on-time | TON | 3 | ms | 9 | |||
| Supply voltage VS = (V+), (V-) | VS | 42 | V | VS = (V+), (V-) | 6 | ||
| Differential input voltage | VID | -42 | 42 | V | 6 | ||
| Input pins (IN+, IN-) voltage from (V-) | -0.3 | 42 | V | from (V-) | 6 | ||
| Current into input pins (IN+, IN-) | -10 | 10 | mA | 6 | |||
| Output (push-pull) voltage from (V-) | OUT | -0.3 | V | from (V-); upper limit printed as (V+) + 0.3 V | 6 | ||
| Output short circuit current | -10 | 10 | mA | Short-circuit to (V-) or (V+) | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD human-body model (HBM) | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD charged-device model (CDM) | V(ESD) | -750 | 750 | V | Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 | 6 | |
| Supply voltage | VS | 1.8 | 40 | V | VS = (V+), (V-) | 7 | |
| Input voltage range from (V-) | -0.1 | 40 | V | from (V-) | 7 | ||
| Common-mode input voltage range from (V-) | 0 | 40 | V | from (V-) | 7 | ||
| Ambient temperature | TA | -40 | 125 | °C | 7 | ||
| Junction-to-ambient thermal resistance (PW, 14 pins) | θJA | 94.2 | °C/W | PW (TSSOP) 14-pin package | 7 | ||
| Junction-to-case (top) thermal resistance (PW, 14 pins) | θJC(top) | 29 | °C/W | PW (TSSOP) 14-pin package | 7 | ||
| Junction-to-board thermal resistance (PW, 14 pins) | θJB | 51.8 | °C/W | PW (TSSOP) 14-pin package | 7 | ||
| Junction-to-top characterization parameter (PW, 14 pins) | ψJT | 1.3 | °C/W | PW (TSSOP) 14-pin package | 7 | ||
| Junction-to-board characterization parameter (PW, 14 pins) | ψJB | 51.1 | °C/W | PW (TSSOP) 14-pin package | 7 |
CAD (Adom-generated)
- Symbol:
TLV1854 - Footprint:
Adom_Gen:Texas_Instruments_TLV1854 - 3D model: generated to fit the land (STEP)
- 3D model files:
tlv1854-etched.step/tlv1854-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1854.step/tlv1854.glbare the bare package body.
Provenance
No distributor stocks TLV1854 yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
4d69037cce8104f0, retrieved 2026-11-04, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# TLV1854
**Texas Instruments** · IC · TSSOP-14 (PW)
TLV1854 from Texas Instruments, in a TSSOP-14 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output pin of comparator 1. |
| 2 | IN1- | input | Negative (inverting) input pin of comparator 1. |
| 3 | IN1+ | input | Positive (non-inverting) input pin of comparator 1. |
| 4 | V+ | power_in | Positive supply voltage pin. |
| 5 | IN2+ | input | Positive (non-inverting) input pin of comparator 2. |
| 6 | IN2- | input | Negative (inverting) input pin of comparator 2. |
| 7 | OUT2 | output | Output pin of comparator 2. |
| 8 | OUT3 | output | Output pin of comparator 3. |
| 9 | IN3- | input | Negative (inverting) input pin of comparator 3. |
| 10 | IN3+ | input | Positive (non-inverting) input pin of comparator 3. |
| 11 | V- | power_in | Negative supply voltage pin. |
| 12 | IN4+ | input | Positive (non-inverting) input pin of comparator 4. |
| 13 | IN4- | input | Negative (inverting) input pin of comparator 4. |
| 14 | OUT4 | output | Output pin of comparator 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 (PW) |
| Category | |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3.6 | 0.25 | 3.6 | mV | | 8 |
| Input offset voltage over temperature | VOS | -4.4 | | 4.4 | mV | TA = -40°C to +125°C | 8 |
| Input hysteresis voltage | VHYS | 1 | 2.8 | 5 | mV | | 8 |
| Common-mode voltage range from (V-) | VCM-Range | 0 | | 40 | V | VS = 1.8V to 40V, TA = -40°C to +125°C | 8 |
| Quiescent current per comparator (output high), push-pull output option | IQ | | 520 | 750 | nA | Push Pull Output Option | 8 |
| Quiescent current per comparator (output high), push-pull output option over temperature | IQ | | | 1000 | nA | Push Pull Output Option, TA = -40°C to 125°C | 8 |
| Input bias current | IB | | 1 | 250 | pA | | 8 |
| Input bias current over temperature | IB | | | 1500 | pA | TA = -40°C to +125°C | 8 |
| Input offset current | IOS | | 0.1 | 100 | pA | | 8 |
| Input offset current over temperature | IOS | | | 1000 | pA | TA = -40°C to +125°C | 8 |
| Voltage swing from (V-) | VOL | | 20 | 60 | mV | ISINK = 50µA | 8 |
| Voltage swing from (V-) over temperature | VOL | | | 100 | mV | ISINK = 50µA, TA = -40°C to +125°C | 8 |
| Voltage swing from (V+), push-pull only | VOH | | 25 | 60 | mV | ISOURCE = 50µA | 8 |
| Voltage swing from (V+), push-pull only, over temperature | VOH | | | 100 | mV | ISOURCE = 50µA, TA = -40°C to +125°C | 8 |
| Short-circuit current, sinking | IOL | | | 7 | mA | Sinking, TA = -40°C to +125°C | 8 |
| Short-circuit current, sourcing (push-pull only) | IOH | | | 5 | mA | Sourcing (for Push-Pull only), TA = -40°C to +125°C | 9 |
| Voltage swing from (V-), low load | VOL | | 1 | | mV | ISINK = 2µA | 8 |
| Voltage swing from (V+), low load, push-pull only | VOH | | 1 | | mV | ISOURCE = 2µA | 8 |
| Power-on reset threshold voltage | VPOR | | 1.5 | | V | During power on, VS must exceed VPOR for tON before the output will reflect the input. | 8 |
| Propagation delay time, high-to-low | TPD-HL | | 45 | | µs | VOD = 10mV, CL = 25pF, VSTEP = 100mV | 9 |
| Propagation delay time, high-to-low | TPD-HL | | 16 | | µs | VOD = 50mV, CL = 25pF, VSTEP = 100mV | 9 |
| Propagation delay time, high-to-low | TPD-HL | | 13 | | µs | VOD = 100mV, CL = 25pF, VSTEP = 200mV | 9 |
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | | 34 | | µs | VOD = 10mV, CL = 10pF, VSTEP = 100mV | 9 |
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | | 16 | | µs | VOD = 50mV, CL = 10pF, VSTEP = 100mV | 9 |
| Propagation delay time, low-to-high (push-pull output) | TPD-LH | | 14 | | µs | VOD = 100mV, CL = 10pF, VSTEP = 200mV | 9 |
| Output rise time, 20% to 80%, push-pull output | TRISE | | 0.2 | | µs | CL = 25pF | 9 |
| Output fall time, 80% to 20% | TFALL | | 0.2 | | µs | CL = 25pF | 9 |
| Power on-time | TON | | 3 | | ms | | 9 |
| Supply voltage VS = (V+), (V-) | VS | | | 42 | V | VS = (V+), (V-) | 6 |
| Differential input voltage | VID | -42 | | 42 | V | | 6 |
| Input pins (IN+, IN-) voltage from (V-) | | -0.3 | | 42 | V | from (V-) | 6 |
| Current into input pins (IN+, IN-) | | -10 | | 10 | mA | | 6 |
| Output (push-pull) voltage from (V-) | OUT | -0.3 | | | V | from (V-); upper limit printed as (V+) + 0.3 V | 6 |
| Output short circuit current | | -10 | | 10 | mA | Short-circuit to (V-) or (V+) | 6 |
| Junction temperature | TJ | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| ESD human-body model (HBM) | V(ESD) | -2000 | | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 6 |
| ESD charged-device model (CDM) | V(ESD) | -750 | | 750 | V | Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 | 6 |
| Supply voltage | VS | 1.8 | | 40 | V | VS = (V+), (V-) | 7 |
| Input voltage range from (V-) | | -0.1 | | 40 | V | from (V-) | 7 |
| Common-mode input voltage range from (V-) | | 0 | | 40 | V | from (V-) | 7 |
| Ambient temperature | TA | -40 | | 125 | °C | | 7 |
| Junction-to-ambient thermal resistance (PW, 14 pins) | θJA | | 94.2 | | °C/W | PW (TSSOP) 14-pin package | 7 |
| Junction-to-case (top) thermal resistance (PW, 14 pins) | θJC(top) | | 29 | | °C/W | PW (TSSOP) 14-pin package | 7 |
| Junction-to-board thermal resistance (PW, 14 pins) | θJB | | 51.8 | | °C/W | PW (TSSOP) 14-pin package | 7 |
| Junction-to-top characterization parameter (PW, 14 pins) | ψJT | | 1.3 | | °C/W | PW (TSSOP) 14-pin package | 7 |
| Junction-to-board characterization parameter (PW, 14 pins) | ψJB | | 51.1 | | °C/W | PW (TSSOP) 14-pin package | 7 |
## CAD (Adom-generated)
- Symbol: `TLV1854`
- Footprint: `Adom_Gen:Texas_Instruments_TLV1854`
- 3D model: generated to fit the land (STEP)
- 3D model files: `tlv1854-etched.step` / `tlv1854-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv1854.step` / `tlv1854.glb` are the bare package body.
## Provenance
> No distributor stocks TLV1854 yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv1854.pdf) (42 pp, sha256 `4d69037cce8104f0`, retrieved 2026-11-04, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/tlv1854-datasheet.pdf)