main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv1854: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tlv1854: CAD wording names the Adom_Gen land, not KiCad official · Ray
tlv1854-etched.glb Publish 0.1.0 · Ray
tlv1854-etched.step tlv1854: factory component page (tier=mfr) · Ray
tlv1854-hero.glb tlv1854: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv1854-hero.overlay.json Publish 0.1.0 · Ray
tlv1854.glb Publish 0.1.0 · Ray
tlv1854.kicad_mod Publish 0.1.0 · Ray
tlv1854.kicad_sym Publish 0.1.0 · Ray
tlv1854.lbr Publish 0.1.0 · Ray
tlv1854.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

TLV1854

Texas Instruments · IC · TSSOP-14 (PW)

TLV1854 from Texas Instruments, in a TSSOP-14 (PW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT1 output Output pin of comparator 1.
2 IN1- input Negative (inverting) input pin of comparator 1.
3 IN1+ input Positive (non-inverting) input pin of comparator 1.
4 V+ power_in Positive supply voltage pin.
5 IN2+ input Positive (non-inverting) input pin of comparator 2.
6 IN2- input Negative (inverting) input pin of comparator 2.
7 OUT2 output Output pin of comparator 2.
8 OUT3 output Output pin of comparator 3.
9 IN3- input Negative (inverting) input pin of comparator 3.
10 IN3+ input Positive (non-inverting) input pin of comparator 3.
11 V- power_in Negative supply voltage pin.
12 IN4+ input Positive (non-inverting) input pin of comparator 4.
13 IN4- input Negative (inverting) input pin of comparator 4.
14 OUT4 output Output pin of comparator 4.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14 (PW)
Category
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -3.6 0.25 3.6 mV 8
Input offset voltage over temperature VOS -4.4 4.4 mV TA = -40°C to +125°C 8
Input hysteresis voltage VHYS 1 2.8 5 mV 8
Common-mode voltage range from (V-) VCM-Range 0 40 V VS = 1.8V to 40V, TA = -40°C to +125°C 8
Quiescent current per comparator (output high), push-pull output option IQ 520 750 nA Push Pull Output Option 8
Quiescent current per comparator (output high), push-pull output option over temperature IQ 1000 nA Push Pull Output Option, TA = -40°C to 125°C 8
Input bias current IB 1 250 pA 8
Input bias current over temperature IB 1500 pA TA = -40°C to +125°C 8
Input offset current IOS 0.1 100 pA 8
Input offset current over temperature IOS 1000 pA TA = -40°C to +125°C 8
Voltage swing from (V-) VOL 20 60 mV ISINK = 50µA 8
Voltage swing from (V-) over temperature VOL 100 mV ISINK = 50µA, TA = -40°C to +125°C 8
Voltage swing from (V+), push-pull only VOH 25 60 mV ISOURCE = 50µA 8
Voltage swing from (V+), push-pull only, over temperature VOH 100 mV ISOURCE = 50µA, TA = -40°C to +125°C 8
Short-circuit current, sinking IOL 7 mA Sinking, TA = -40°C to +125°C 8
Short-circuit current, sourcing (push-pull only) IOH 5 mA Sourcing (for Push-Pull only), TA = -40°C to +125°C 9
Voltage swing from (V-), low load VOL 1 mV ISINK = 2µA 8
Voltage swing from (V+), low load, push-pull only VOH 1 mV ISOURCE = 2µA 8
Power-on reset threshold voltage VPOR 1.5 V During power on, VS must exceed VPOR for tON before the output will reflect the input. 8
Propagation delay time, high-to-low TPD-HL 45 µs VOD = 10mV, CL = 25pF, VSTEP = 100mV 9
Propagation delay time, high-to-low TPD-HL 16 µs VOD = 50mV, CL = 25pF, VSTEP = 100mV 9
Propagation delay time, high-to-low TPD-HL 13 µs VOD = 100mV, CL = 25pF, VSTEP = 200mV 9
Propagation delay time, low-to-high (push-pull output) TPD-LH 34 µs VOD = 10mV, CL = 10pF, VSTEP = 100mV 9
Propagation delay time, low-to-high (push-pull output) TPD-LH 16 µs VOD = 50mV, CL = 10pF, VSTEP = 100mV 9
Propagation delay time, low-to-high (push-pull output) TPD-LH 14 µs VOD = 100mV, CL = 10pF, VSTEP = 200mV 9
Output rise time, 20% to 80%, push-pull output TRISE 0.2 µs CL = 25pF 9
Output fall time, 80% to 20% TFALL 0.2 µs CL = 25pF 9
Power on-time TON 3 ms 9
Supply voltage VS = (V+), (V-) VS 42 V VS = (V+), (V-) 6
Differential input voltage VID -42 42 V 6
Input pins (IN+, IN-) voltage from (V-) -0.3 42 V from (V-) 6
Current into input pins (IN+, IN-) -10 10 mA 6
Output (push-pull) voltage from (V-) OUT -0.3 V from (V-); upper limit printed as (V+) + 0.3 V 6
Output short circuit current -10 10 mA Short-circuit to (V-) or (V+) 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
ESD human-body model (HBM) V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 6
ESD charged-device model (CDM) V(ESD) -750 750 V Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 6
Supply voltage VS 1.8 40 V VS = (V+), (V-) 7
Input voltage range from (V-) -0.1 40 V from (V-) 7
Common-mode input voltage range from (V-) 0 40 V from (V-) 7
Ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance (PW, 14 pins) θJA 94.2 °C/W PW (TSSOP) 14-pin package 7
Junction-to-case (top) thermal resistance (PW, 14 pins) θJC(top) 29 °C/W PW (TSSOP) 14-pin package 7
Junction-to-board thermal resistance (PW, 14 pins) θJB 51.8 °C/W PW (TSSOP) 14-pin package 7
Junction-to-top characterization parameter (PW, 14 pins) ψJT 1.3 °C/W PW (TSSOP) 14-pin package 7
Junction-to-board characterization parameter (PW, 14 pins) ψJB 51.1 °C/W PW (TSSOP) 14-pin package 7

CAD (Adom-generated)

  • Symbol: TLV1854
  • Footprint: Adom_Gen:Texas_Instruments_TLV1854
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv1854-etched.step / tlv1854-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1854.step / tlv1854.glb are the bare package body.

Provenance

No distributor stocks TLV1854 yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 4d69037cce8104f0, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF