main
Ray
Publish 0.1.0
b96efd5
TLV1842DGKR
Texas Instruments · IC · VSSOP-8
TLV1842DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output pin of comparator 1; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-. |
| 2 | IN1- | input | Inverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 3 | IN1+ | input | Noninverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 4 | V- | power_in | Negative supply voltage; for single-supply operation GND is applied to this pin, and it is the reference for the output low level. |
| 5 | IN2+ | input | Noninverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 6 | IN2- | input | Inverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 7 | OUT2 | output | Output pin of comparator 2; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-. |
| 8 | V+ | power_in | Positive supply voltage; the recommended supply range is 2.7 V to 40 V (V+ minus V-) with an absolute maximum of 42 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -2.5 | 0.3 | 2.5 | mV | TA = 25°C | 7 |
| Input offset voltage | VOS | -3 | 3 | mV | TA = -40°C to +125°C | 7 | |
| Input bias current | IB | -5 | 5 | nA | TA = -40°C to +125°C | 7 | |
| Quiescent current per comparator, output high | IQ | 75 | 95 | µA | No Load, Output High, TA = 25°C | 7 | |
| Quiescent current per comparator, output high | IQ | 100 | µA | No Load, Output High, TA = -40°C to +125°C | 7 | ||
| Quiescent current per comparator, output low | IQ | 95 | 130 | µA | No Load, Output Low, TA = 25°C | 7 | |
| Quiescent current per comparator, output low | IQ | 135 | µA | No Load, Output Low, TA = -40°C to +125°C | 7 | ||
| Voltage swing from (V-), output low | VOL | 400 | mV | ISINK = 4mA, TA = -40°C to +125°C | 7 | ||
| Open-drain output leakage current | ILKG | 3 | 70 | nA | VID = +0.1V, VPULLUP = (V+), TA = -40°C to +125°C | 7 | |
| Power on-time | PON | 80 | µs | 8 | |||
| Supply voltage | VS | 2.7 | 40 | V | 6 | ||
| Output voltage for open drain | -0.2 | 40 | V | 6 | |||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Supply voltage | VS | -0.3 | 42 | V | VS = (V+), (V-) | 6 | |
| Output (OUT) open drain from (V-) | -0.3 | 42 | V | 6 | |||
| Current into input pins (IN+, IN-) | -10 | 10 | mA | 6 | |||
| Output short circuit current | -10 | 10 | mA | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 151.5 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 61.1 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 86.1 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
TLV1842DGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv1842dgkr-etched.step/tlv1842dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1842dgkr.step/tlv1842dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
3e817543b9ea8e31, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLV1842DGKR
**Texas Instruments** · IC · VSSOP-8
TLV1842DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output pin of comparator 1; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-. |
| 2 | IN1- | input | Inverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 3 | IN1+ | input | Noninverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 4 | V- | power_in | Negative supply voltage; for single-supply operation GND is applied to this pin, and it is the reference for the output low level. |
| 5 | IN2+ | input | Noninverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 6 | IN2- | input | Inverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA. |
| 7 | OUT2 | output | Output pin of comparator 2; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-. |
| 8 | V+ | power_in | Positive supply voltage; the recommended supply range is 2.7 V to 40 V (V+ minus V-) with an absolute maximum of 42 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -2.5 | 0.3 | 2.5 | mV | TA = 25°C | 7 |
| Input offset voltage | VOS | -3 | | 3 | mV | TA = -40°C to +125°C | 7 |
| Input bias current | IB | -5 | | 5 | nA | TA = -40°C to +125°C | 7 |
| Quiescent current per comparator, output high | IQ | | 75 | 95 | µA | No Load, Output High, TA = 25°C | 7 |
| Quiescent current per comparator, output high | IQ | | | 100 | µA | No Load, Output High, TA = -40°C to +125°C | 7 |
| Quiescent current per comparator, output low | IQ | | 95 | 130 | µA | No Load, Output Low, TA = 25°C | 7 |
| Quiescent current per comparator, output low | IQ | | | 135 | µA | No Load, Output Low, TA = -40°C to +125°C | 7 |
| Voltage swing from (V-), output low | VOL | | | 400 | mV | ISINK = 4mA, TA = -40°C to +125°C | 7 |
| Open-drain output leakage current | ILKG | | 3 | 70 | nA | VID = +0.1V, VPULLUP = (V+), TA = -40°C to +125°C | 7 |
| Power on-time | PON | | | 80 | µs | | 8 |
| Supply voltage | VS | 2.7 | | 40 | V | | 6 |
| Output voltage for open drain | | -0.2 | | 40 | V | | 6 |
| Ambient temperature | TA | -40 | | 125 | °C | | 6 |
| Supply voltage | VS | -0.3 | | 42 | V | VS = (V+), (V-) | 6 |
| Output (OUT) open drain from (V-) | | -0.3 | | 42 | V | | 6 |
| Current into input pins (IN+, IN-) | | -10 | | 10 | mA | | 6 |
| Output short circuit current | | -10 | | 10 | mA | | 6 |
| Junction temperature | TJ | | | 150 | °C | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | | 151.5 | | °C/W | | 6 |
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | | 61.1 | | °C/W | | 6 |
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | | 86.1 | | °C/W | | 6 |
## CAD (KiCad official)
- Symbol: `TLV1842DGKR`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tlv1842dgkr-etched.step` / `tlv1842dgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv1842dgkr.step` / `tlv1842dgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlv1842.pdf) (47 pp, sha256 `3e817543b9ea8e31`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlv1842dgkr-datasheet.pdf)