Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV1842DGKR

Texas Instruments · IC · VSSOP-8

TLV1842DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output pin of comparator 1; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-.
2 IN1- input Inverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA.
3 IN1+ input Noninverting input of comparator 1; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA.
4 V- power_in Negative supply voltage; for single-supply operation GND is applied to this pin, and it is the reference for the output low level.
5 IN2+ input Noninverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA.
6 IN2- input Inverting input of comparator 2; the input voltage range is (V-) - 0.2 V to (V+) + 0.2 V and input current into the pin is limited to ±10 mA.
7 OUT2 output Output pin of comparator 2; for the TLV184x (open-drain) it can be pulled up to 40 V independent of V+, with absolute maximum output voltage of -0.3 V to 42 V from V-.
8 V+ power_in Positive supply voltage; the recommended supply range is 2.7 V to 40 V (V+ minus V-) with an absolute maximum of 42 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C 7
Input offset voltage VOS -3 3 mV TA = -40°C to +125°C 7
Input bias current IB -5 5 nA TA = -40°C to +125°C 7
Quiescent current per comparator, output high IQ 75 95 µA No Load, Output High, TA = 25°C 7
Quiescent current per comparator, output high IQ 100 µA No Load, Output High, TA = -40°C to +125°C 7
Quiescent current per comparator, output low IQ 95 130 µA No Load, Output Low, TA = 25°C 7
Quiescent current per comparator, output low IQ 135 µA No Load, Output Low, TA = -40°C to +125°C 7
Voltage swing from (V-), output low VOL 400 mV ISINK = 4mA, TA = -40°C to +125°C 7
Open-drain output leakage current ILKG 3 70 nA VID = +0.1V, VPULLUP = (V+), TA = -40°C to +125°C 7
Power on-time PON 80 µs 8
Supply voltage VS 2.7 40 V 6
Output voltage for open drain -0.2 40 V 6
Ambient temperature TA -40 125 °C 6
Supply voltage VS -0.3 42 V VS = (V+), (V-) 6
Output (OUT) open drain from (V-) -0.3 42 V 6
Current into input pins (IN+, IN-) -10 10 mA 6
Output short circuit current -10 10 mA 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DGK, VSSOP) RθJA 151.5 °C/W 6
Junction-to-case (top) thermal resistance (DGK, VSSOP) RθJC(top) 61.1 °C/W 6
Junction-to-board thermal resistance (DGK, VSSOP) RθJB 86.1 °C/W 6

CAD (KiCad official)

  • Symbol: TLV1842DGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv1842dgkr-etched.step / tlv1842dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1842dgkr.step / tlv1842dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 3e817543b9ea8e31, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF