main
Ray Publish 0.1.0 e239364

TLV1701AQDCKRQ1

Texas Instruments · Comparators · SC-70-5

TLV1701AQDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Noninverting input; input pins are diode-clamped to the power-supply rails and input signals that swing more than 0.5 V beyond the rails must be current limited to 10 mA or less.
2 V- power_in Negative (lowest) power supply; the device is specified from 2.2 V to 36 V total supply (±1.1 V to ±18 V).
3 IN- input Inverting input; input pins are diode-clamped to the power-supply rails and input signals that swing more than 0.5 V beyond the rails must be current limited to 10 mA or less.
4 OUT output Open-collector comparator output that can be pulled up to any voltage rail up to 36 V above the negative supply regardless of the device supply voltage.
5 V+ power_in Positive (highest) power supply; the device is specified from 2.2 V to 36 V total supply (±1.1 V to ±18 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -3.5 0.5 3.5 mV TA = 25°C, VS = 2.2 V 6
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C, VS = 36 V 6
Input offset voltage VOS -5.5 5.5 mV TA = -40°C to +125°C 6
Input offset voltage VOS -3.2 0.4 3.2 mV TA = 25°C, VS = 36 V, TLV1701-Q1 Only 6
Input offset voltage VOS -6.3 6.3 mV TA = -40°C to +125°C, TLV1701-Q1 Only 6
Input offset voltage drift dVOS/dT -20 4 20 μV/°C TA = -40°C to +125°C 6
Power-supply rejection ratio PSRR 15 100 μV/V TA = 25°C 6
Input bias current IB 5 15 nA TA = 25°C 6
Input bias current IB 20 nA TA = -40°C to +125°C 6
Voltage output swing from rail VO 900 mV IO ≤ 4 mA, input overdrive = 100 mV, VS = 36 V 6
Voltage output swing from rail VO 600 mV IO = 0 mA, input overdrive = 100 mV, VS = 36 V 6
Output leakage current 70 nA VIN+ > VIN- 6
Specified voltage range VS 2.2 36 V 6
Quiescent current (per channel) IQ 55 75 μA IO = 0 A 6
Quiescent current (per channel) IQ 100 μA IO = 0 A, TA = -40°C to +125°C 6
Supply voltage (±20 V dual supply) 40 V 5
Signal input pins current -10 10 mA 5
Operating temperature -55 150 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VS 2.2 36 V VS = (VS+), (VS-) 5
Specified temperature -40 125 °C 5
Power-supply rejection ratio PSRR 20 μV/V TA = -40°C to +125°C 6
Input offset current IOS 0.5 nA 6
Short circuit sink current ISC 20 mA 6
Propagation delay time, high-to-low tpHL 460 ns Input overdrive = 100 mV 6
Propagation delay time, low-to-high tpLH 560 ns Input overdrive = 100 mV 6
Rise time tR 365 ns Input overdrive = 100 mV 6
Fall time tF 240 ns Input overdrive = 100 mV 6
Junction-to-ambient thermal resistance (DCK, SC-70) RθJA 222.5 °C/W 5
Junction-to-case (top) thermal resistance (DCK, SC-70) RθJC(top) 137.2 °C/W 5
Junction-to-board thermal resistance (DCK, SC-70) RθJB 71.3 °C/W 5
Junction-to-top characterization parameter (DCK, SC-70) ψJT 44.6 °C/W 5
Junction-to-board characterization parameter (DCK, SC-70) ψJB 71 °C/W 5

CAD (KiCad official)

  • Symbol: TLV1701AQDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tlv1701aqdckrq1-etched.step / tlv1701aqdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1701aqdckrq1.step / tlv1701aqdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 07bcfbdf59a54698, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF