Generated by kicad-footprint-generator · KiCad file format 20260206
TLV1701AQDCKRQ1
Texas Instruments · Comparators · SC-70-5
TLV1701AQDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Noninverting input; input pins are diode-clamped to the power-supply rails and input signals that swing more than 0.5 V beyond the rails must be current limited to 10 mA or less. |
| 2 | V- | power_in | Negative (lowest) power supply; the device is specified from 2.2 V to 36 V total supply (±1.1 V to ±18 V). |
| 3 | IN- | input | Inverting input; input pins are diode-clamped to the power-supply rails and input signals that swing more than 0.5 V beyond the rails must be current limited to 10 mA or less. |
| 4 | OUT | output | Open-collector comparator output that can be pulled up to any voltage rail up to 36 V above the negative supply regardless of the device supply voltage. |
| 5 | V+ | power_in | Positive (highest) power supply; the device is specified from 2.2 V to 36 V total supply (±1.1 V to ±18 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3.5 | 0.5 | 3.5 | mV | TA = 25°C, VS = 2.2 V | 6 |
| Input offset voltage | VOS | -2.5 | 0.3 | 2.5 | mV | TA = 25°C, VS = 36 V | 6 |
| Input offset voltage | VOS | -5.5 | 5.5 | mV | TA = -40°C to +125°C | 6 | |
| Input offset voltage | VOS | -3.2 | 0.4 | 3.2 | mV | TA = 25°C, VS = 36 V, TLV1701-Q1 Only | 6 |
| Input offset voltage | VOS | -6.3 | 6.3 | mV | TA = -40°C to +125°C, TLV1701-Q1 Only | 6 | |
| Input offset voltage drift | dVOS/dT | -20 | 4 | 20 | μV/°C | TA = -40°C to +125°C | 6 |
| Power-supply rejection ratio | PSRR | 15 | 100 | μV/V | TA = 25°C | 6 | |
| Input bias current | IB | 5 | 15 | nA | TA = 25°C | 6 | |
| Input bias current | IB | 20 | nA | TA = -40°C to +125°C | 6 | ||
| Voltage output swing from rail | VO | 900 | mV | IO ≤ 4 mA, input overdrive = 100 mV, VS = 36 V | 6 | ||
| Voltage output swing from rail | VO | 600 | mV | IO = 0 mA, input overdrive = 100 mV, VS = 36 V | 6 | ||
| Output leakage current | 70 | nA | VIN+ > VIN- | 6 | |||
| Specified voltage range | VS | 2.2 | 36 | V | 6 | ||
| Quiescent current (per channel) | IQ | 55 | 75 | μA | IO = 0 A | 6 | |
| Quiescent current (per channel) | IQ | 100 | μA | IO = 0 A, TA = -40°C to +125°C | 6 | ||
| Supply voltage (±20 V dual supply) | 40 | V | 5 | ||||
| Signal input pins current | -10 | 10 | mA | 5 | |||
| Operating temperature | -55 | 150 | °C | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VS | 2.2 | 36 | V | VS = (VS+), (VS-) | 5 | |
| Specified temperature | -40 | 125 | °C | 5 | |||
| Power-supply rejection ratio | PSRR | 20 | μV/V | TA = -40°C to +125°C | 6 | ||
| Input offset current | IOS | 0.5 | nA | 6 | |||
| Short circuit sink current | ISC | 20 | mA | 6 | |||
| Propagation delay time, high-to-low | tpHL | 460 | ns | Input overdrive = 100 mV | 6 | ||
| Propagation delay time, low-to-high | tpLH | 560 | ns | Input overdrive = 100 mV | 6 | ||
| Rise time | tR | 365 | ns | Input overdrive = 100 mV | 6 | ||
| Fall time | tF | 240 | ns | Input overdrive = 100 mV | 6 | ||
| Junction-to-ambient thermal resistance (DCK, SC-70) | RθJA | 222.5 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DCK, SC-70) | RθJC(top) | 137.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DCK, SC-70) | RθJB | 71.3 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DCK, SC-70) | ψJT | 44.6 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DCK, SC-70) | ψJB | 71 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TLV1701AQDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tlv1701aqdckrq1-etched.step/tlv1701aqdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1701aqdckrq1.step/tlv1701aqdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
07bcfbdf59a54698, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).