main
Ray
tlk105rhbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
fe8952a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357
{
"schema_version": 1,
"type": "component",
"slug": "tlk105rhbr",
"title": "TLK105RHBR",
"brief": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"tlk105rhbr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TLK105RHBR",
"manufacturer": "Texas Instruments",
"package": "VQFN-32-EP(5x5)",
"pin_count": 33,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/tlk105",
"parts": {
"symbol": "tlk105rhbr.kicad_sym",
"footprint": "tlk105rhbr.kicad_mod",
"model_3d": "tlk105rhbr-etched.glb",
"model_3d_plain": "tlk105rhbr.glb",
"model_3d_step": "tlk105rhbr-etched.step",
"model_3d_step_plain": "tlk105rhbr.step",
"lbr": "tlk105rhbr.lbr"
},
"distributor_links": {
"lcsc": "C337498"
},
"pins": [
{
"number": "1",
"name": "RXD_3 / PHYAD4",
"type": "output",
"description": "Receive Data 3 or PHY Address 4; decoded receive data symbol output synchronous to RX_CLK with weak internal pulldown for address configuration."
},
{
"number": "2",
"name": "TX_CLK",
"type": "output",
"description": "Transmit Clock providing 25MHz or 2.5MHz reference clock for MII mode; constant phase relationship to REF_CLK."
},
{
"number": "3",
"name": "TX_EN",
"type": "input",
"description": "Transmit Enable active-high input indicating valid data on TXD[3:0] in MII or TXD[1:0] in RMII mode with internal pulldown."
},
{
"number": "4",
"name": "TXD_0",
"type": "input",
"description": "Transmit Data 0 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
},
{
"number": "5",
"name": "TXD_1",
"type": "input",
"description": "Transmit Data 1 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
},
{
"number": "6",
"name": "TXD_2",
"type": "input",
"description": "Transmit Data 2 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
},
{
"number": "7",
"name": "TXD_3",
"type": "input",
"description": "Transmit Data 3 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
},
{
"number": "8",
"name": "INT / PWDN",
"type": "bidirectional",
"description": "Interrupt/Power Down open-drain output with weak internal pullup; default active-low power-down control, configurable as active-low interrupt output via register access."
},
{
"number": "9",
"name": "RD–",
"type": "bidirectional",
"description": "Receive Differential Minus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."
},
{
"number": "10",
"name": "RD+",
"type": "bidirectional",
"description": "Receive Differential Plus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."
},
{
"number": "11",
"name": "TD–",
"type": "bidirectional",
"description": "Transmit Differential Minus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."
},
{
"number": "12",
"name": "TD+",
"type": "bidirectional",
"description": "Transmit Differential Plus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."
},
{
"number": "13",
"name": "PFBIN1",
"type": "power_in",
"description": "Power Feedback Input 1 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."
},
{
"number": "14",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3V power supply for AFE and analog circuitry; 10µF and 0.1µF bypass capacitors required close to pin."
},
{
"number": "15",
"name": "PFBOUT",
"type": "power_out",
"description": "Power Feedback Output from internal regulator in single-supply operation; requires 10µF and 0.1µF capacitors and connection to PFBIN1/PFBIN2."
},
{
"number": "16",
"name": "RBIAS",
"type": "passive",
"description": "Bias Resistor connection point; connect 4.87kΩ 1% resistor from this pin to GND for bias current generation."
},
{
"number": "17",
"name": "LED_LINK / AN_0",
"type": "output",
"description": "LED Link output or Auto-Negotiation Mode select; indicates link status (Mode 1) or link and activity (Mode 2) with internal pullup for full-duplex configuration."
},
{
"number": "18",
"name": "RESET",
"type": "input",
"description": "Active-low reset input with internal pullup; minimum 1µs low pulse initiates full device reset and re-latches hardware configuration pins."
},
{
"number": "19",
"name": "MDIO",
"type": "bidirectional",
"description": "Management Data I/O bidirectional signal synchronized to MDC for serial management interface; requires external 2.2kΩ pullup resistor."
},
{
"number": "20",
"name": "MDC",
"type": "input",
"description": "Management Data Clock input for serial management interface with maximum rate 25MHz; not required synchronous to TX_CLK or RX_CLK."
},
{
"number": "21",
"name": "VDD_IO",
"type": "power_in",
"description": "I/O power supply selectable as 3.3V, 2.5V, or 1.8V (MII mode only) for digital I/O logic levels with decoupling capacitor required."
},
{
"number": "22",
"name": "XO",
"type": "output",
"description": "Crystal oscillator output for crystal connection; leave floating when external CMOS-level oscillator connected to XI pin."
},
{
"number": "23",
"name": "XI",
"type": "input",
"description": "Crystal/Oscillator input accepting 25MHz (MII) or 50MHz (RMII) reference clock with ±50ppm tolerance from external oscillator or crystal resonator."
},
{
"number": "24",
"name": "PFBIN2",
"type": "power_in",
"description": "Power Feedback Input 2 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."
},
{
"number": "25",
"name": "RX_CLK",
"type": "output",
"description": "Receive Clock output providing 25MHz or 2.5MHz recovered clock derived from received data stream in MII mode; unused in RMII mode."
},
{
"number": "26",
"name": "RX_DV / MII_MODE",
"type": "output",
"description": "Receive Data Valid output or Mode select configuration pin; indicates valid data on RXD[3:0] for MII or RXD[1:0] for RMII with internal pulldown; strapping sets MII/RMII mode."
},
{
"number": "27",
"name": "CRS / CRS_DV / LED_CFG",
"type": "output",
"description": "Carrier Sense or Carrier Sense/Receive Data Valid output or LED Configuration pin; asserts high when receive medium non-idle in MII/RMII with internal pullup."
},
{
"number": "28",
"name": "RX_ER / AMDIX_EN",
"type": "output",
"description": "Receive Error output indicating error symbol detection synchronous to RX_CLK or Auto-MDIX Enable configuration pin with internal pullup."
},
{
"number": "29",
"name": "COL / PHYAD0",
"type": "output",
"description": "Collision Detect output or PHY Address 0; asserts high in half-duplex when both transmit and receive media active; always low in full-duplex with internal pullup."
},
{
"number": "30",
"name": "RXD_0 / PHYAD1",
"type": "output",
"description": "Receive Data 0 or PHY Address 1; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
},
{
"number": "31",
"name": "RXD_1 / PHYAD2",
"type": "output",
"description": "Receive Data 1 or PHY Address 2; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
},
{
"number": "32",
"name": "RXD_2 / PHYAD3",
"type": "output",
"description": "Receive Data 2 or PHY Address 3; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
},
{
"number": "33",
"name": "GND",
"type": "power_in",
"description": "Ground and exposed thermal pad on bottom of package; must be soldered for thermal performance; thermal via guidelines: 0.2mm vias, 4 vias minimum, 2mm center-to-center spacing."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pins 1, 30-32 and 29 have multiplexed functions (RXD/PHYAD and COL/PHYAD0) that are sampled at diffe",
"1/33 pins cited to the wrong page (name found elsewhere): ['33:GND@p36']"
],
"pages_sent": 101,
"cost_usd": 1.1165,
"at": "2026-09-24T08:28:37"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tlk105",
"pages": 101,
"sha256": "348238b64fbb769a",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tlk105rhbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tlk105rhbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.875
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "e053b7d620959dd7ddbf78587da9e294e208369779106e2c3c79d3844ca7c192",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VQFN-32-EP(5x5)",
"Category": "Interface",
"Pins": "33"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tlk105rhbr"
],
"discovery_pitch": "TLK105RHBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tlk105rhbr.kicad_sym",
"tlk105rhbr.kicad_mod",
"tlk105rhbr.glb",
"tlk105rhbr.step",
"tlk105rhbr.lbr",
"docs/hero.png",
"docs/tlk105rhbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
}
}